European Commission logo
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS

Partitioning And Transmuter Research Initiative in a Collaborative Innovation Action

Risultati finali

Simulation and optimization of performance during normal operating conditions of a MA-bearing fuel pin; comparison with ADS-MYRRHA targets
SAS and DES simulations of the Backwards Facing Step

Simulations of the Backwards Facing Step

Description of new meso-scale models and their implementation in fuel performance codes
Description of new correlations/databases for fuel performance codes to be applied to Am-bearing fuels
Towards multi-physics description of fuel behaviour for accidental conditions
Measurements and atomic scale calculations in U-Pu-Am-Np-O systems
Project presentation
Design and fabrication of the 7-pin heated bundle and integration into 15-15Ti cladding tubes

Design and fabrication of the 7pin heated bundle and integration into 1515Ti cladding tubes

Project quality plan including measure of success
Accelerator reliability studies with emphasis on the fault tolerance capabilities
Materials selection and conditions

Materials selection and conditions this deliverable will include a description of the material available for the project and the exposure conditions

Pre-test and post-test numerical analysis of coolant chemistry behaviour in the non-isothermal LBE loop MEXICO
MARINE gas puncturing and swelling behaviour of (U, Am)02

MARINE gas puncturing and swelling behaviour of U Am02

Detailed Dissemination, Exploitation and Communication action plan

Detailed Dissemination Exploitation and Communication action plan

Report on the comparison of the explicit AHFM with available test cases and on the implementation of the implicit AHFM in OpenFOAM
Data Management and Quality Plan
Data Management Plan

Data Management Plan: needs to be updated in the course of the project whenever significant changes arise such as: new data; changes in consortium policies (e.g. new innovation potential, decision to file for a patent); changes in consortium composition and external factors (e.g. new consortium members joining or members leaving).

Pubblicazioni

Modeling of Forced Convection in low Prandtl Number Fluids Using a Novel Local Algebraic Heat Flux Model

Autori: Habiyaremye V., Mathur A., Roelofs F.
Pubblicato in: NURETH20, 2023
Editore: ANS

Fast Reactor Thermal Hydraulics in the Dutch PIONEER Program

Autori: Roelofs F., Uitslag-Doolaard H., Zwijsen K., Mathur A., Visser D., Frederix E., Dovizio D., Cervi E., Stempniewicz M., De Kock I., Breijder P., Komen E.
Pubblicato in: IAEA Technical Meeting on State-of-the-Art Thermal Hydraulics of Fast Reactors, 2022
Editore: IAEA

A Physics-Based Description of Inter-Granular Helium Behaviour in SCIANTIX for Application in Fuel Performance Codes

Autori: R. Giorgi, A. Cechet, L. Cognini, A. Magni, D. Pizzocri, L. Luzzi, A. Schubert, P. Van Uffelen
Pubblicato in: ProceedingsTop Fuel 2021, 2021, ISBN 978-92-95064-35-5
Editore: ANS

State-of-the-Art Turbulent Heat Flux Modelling for Low-Prandtl Flows

Autori: Mathur A., Roelofs F., Fiore M., Koloszar L.
Pubblicato in: IAEA Technical Meeting on State-of-the-Art Thermal Hydraulics of Fast Reactors, 2022
Editore: IAEA

Analysis of the Anisotropic Term in the Implicit Algebraic Heat Flux Model in the Case of Low Prandtl Flow in Planar Impinging Jet Case

Autori: Oder, Jure; Coëpeau, Alexis; Koloszar, Lilla; Laboureur, Delphine; Keijers, Steven
Pubblicato in: NURETH20, Numero 4, 2023
Editore: ANS
DOI: 10.13182/NURETH20-40356

LIQUID METAL THERMAL HYDRAULIC ACTIVITIES IN EUROPEAN COLLABORATIVE PROJECTS

Autori: F. Roelofs (NRG), M. Tarantino, G. Grasso (ENEA), K. Van Tichelen P. Schuurmans (SCK CEN)
Pubblicato in: Proceedings NURETH19, Numero Log nr 34010, 2022
Editore: ANS

NUMERICAL MODELLING AND SIMULATION OF THE CIRCE FACILITY IN THE PATRICIA PROJECT

Autori: M. Profir, V. Moreau (CRS4), D. Martelli, I. Di Piazza, P. Lorusso, M. Tarantino (ENEA)
Pubblicato in: Proceedings NURETH19, Numero Log nr 35033, 2022
Editore: ANS

Simulating Wire-wrapped Fuel Assembly Blockages in CFD

Autori: Roelofs F., Mathur A., Uitslag-Doolaard H.
Pubblicato in: ANS Annual Meeting, 2023
Editore: ANS

Comparison of System Thermal Hydraulic and CFD Analyses of E-SCAPE at forced circulation and under isothermal conditions

Autori: Pangukir F., Visser D., Roelofs F., Pacio J., Van Tichelen K.
Pubblicato in: NURETH20, 2023
Editore: ANS

LIQUID METAL THERMAL HYDRAULIC ACTIVITIES IN EUROPEAN COLLABORATIVE PROJECTS

Autori: P. Schuurmans (SCK CEN), S. Cornet (CEA), R. Delville (SCK CEN), L. Luzzi (POLIMI), F. Roelofs (NRG)
Pubblicato in: Proceedings 16IEMPT (Information Exchange Meeting on Actinide and Fission Product P&T), 2022
Editore: NEA

Dutch Thermal Hydraulic Design and Safety Support for LMFRs

Autori: Roelofs F., Visser D., Zwijsen K., Uitslag-Doolaard H.
Pubblicato in: Fast Reactor Conference 2022, 2022
Editore: IAEA

Availability Modelling of the Solid-State Power Amplifiers for the CERN SPS RF Upgrade

Autori: Lukas Felsberger, Andrea Apollonio, Thomas Cartier-Michaud, Eric Montesinos, Jan Uythoven
Pubblicato in: 12th International Particle Accelerator Conference proceedings, 2021, Pagina/e 2308-2311, ISBN 978-3-95450-214-1
Editore: JACoW

Complexation and extraction studies of trivalent actinides and lanthanides with water-soluble and CHON-compatible ligands for the selective extraction of americium

Autori: Weßling, P.; Maag, M.; Baruth, G.; Sittel, T.; Sauerwein, F. S.; Wilden, A.; Modolo, G.; Geist, A.; Panak, P. J.
Pubblicato in: Inorganic Chemistry, 2022, Pagina/e 17719−17729, ISSN 0020-1669
Editore: American Chemical Society
DOI: 10.1021/acs.inorgchem.2c0287

State-of-the-art turbulent heat flux modelling for low-Prandtl flows

Autori: Mathur A., Roelofs F., Fiore M., Koloszar L.
Pubblicato in: Nuclear Engineering & Design, Numero vol. 406, 112241, 2023, ISSN 0029-5493
Editore: Elsevier BV
DOI: 10.1016/j.nucengdes.2023.112241

Selective actinide(III) separation using 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PyTri-Diol) in the innovative-SANEX process: laboratory scale counter current centrifugal contactor demonstration

Autori: Andreas Wilden, Dimitri Schneider, Zaina Paparigas, Maximilian Henkes, Fabian Kreft, Andreas Geist, Eros Mossini, Elena Macerata, Mario Mariani, Maria Chiara Gullo, Alessandro Casnati, Giuseppe Modolo
Pubblicato in: Radiochimica Acta, Numero Volume 10/ 12 issues a year, 2022, Pagina/e 515-525, ISSN 2193-3405
Editore: De Gruyter
DOI: 10.1515/ract-2022-0014

Overview on Lead-Cooled Fast Reactor Design and Related Technologies Development in ENEA

Autori: Mariano Tarantino; M. Angiolini; Serena Bassini; Sebastiano Cataldo; Chiara Ciantelli; C. Cristalli; Alessandro Del Nevo; Ivan Di Piazza; Dario Diamanti; Marica Eboli; A. Fiore; Giacomo Grasso; Francesco Lodi; P. Lorusso; R. Marinari; Daniele Martelli; Francesca Papa; Camillo Sartorio; Marco Utili; Alessandro Venturini
Pubblicato in: Energies; Volume 14; Numero 16; Pages: 5157, Numero 14, 2021, ISSN 1996-1073
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en14165157

Physics-based modelling and validation of inter-granular helium behaviour in SCIANTIX

Autori: R. Giorgi, A. Cechet, L. Cognini, A. Magni, D. Pizzocri, G. Zullo, A. Schubert, P. Van Uffelen, L. Luzzi
Pubblicato in: Nuclear Engineering and Technology, Numero Volume 54, 2022, Pagina/e 2367-2375, ISSN 1738-5733
Editore: Korean Nuclear Society
DOI: 10.1016/j.net.2022.01.012

The SquAd derivation: A Square Additive approach to the turbulent Prandtl number

Autori: Vincent Moreau
Pubblicato in: Open Research Europe, 2023, ISSN 2046-1402
Editore: F1000 Research Ltd.
DOI: 10.12688/openreseurope.15367.1

Speciation and Ammonia-Induced Precipitation of Neptunium and Uranium Ions

Autori: Leinders, Gregory; Acevedo, Beatriz; Jutier, Frédéric; Colak, Gamze; Verwerft, Marc
Pubblicato in: Crossref, Numero 4, 2023, ISSN 0020-1669
Editore: American Chemical Society
DOI: 10.1021/acs.inorgchem.3c00647

Advanced thermal-hydraulic experiments and instrumentation for heavy liquid metal reactors

Autori: Julio Pacio; Katrien Van Tichelen; Sven Eckert; Thomas Wondrak; Ivan Di Piazza; Pierdomenico Lorusso; Mariano Tarantino; Markus Daubner; Karsten Litfin; Gen Ariyoshi; Hironari Obayashi; Toshinobu Sasa
Pubblicato in: Nuclear Engineering and Design 399(2022), 112010, Numero 14, 2022, Pagina/e 112010, ISSN 0029-5493
Editore: Elsevier BV
DOI: 10.1016/j.nucengdes.2022.112010

On the intra-granular behaviour of a cocktail of inert gases in oxide nuclear fuel: Methodological recommendation for accelerated experimental investigation

Autori: M. Romano, D. Pizzocri, L. Luzzi
Pubblicato in: Nuclear Engineering and Design, Numero Volume 54, Numero 5, 2021, Pagina/e 1929-1934, ISSN 1738-5733
Editore: Korean Nuclear Society
DOI: 10.1016/j.net.2021.11.020

Fast Reactor Multi-Scale and Multi-Physics Modelling at NRG

Autori: Roelofs F., Uitslag-Doolaard H., Zwijsen K., Mathur A., Visser D., Frederix E., Dovizio D., Cervi E., Stempniewicz M., De Kock I., Breijder P., Komen E.
Pubblicato in: Nuclear Engineering & Design, Numero vol. 412, 112473, 2023, ISSN 0029-5493
Editore: Elsevier BV
DOI: 10.1016/j.nucengdes.2023.112473

Advancements in modelling the thermal-mechanical behaviour of MOX-fuelled pins and application to liquid-metal fast reactor conditions

Autori: A. Magni (POLIMI)
Pubblicato in: 2022
Editore: POLIMI

È in corso la ricerca di dati su OpenAIRE...

Si è verificato un errore durante la ricerca dei dati su OpenAIRE

Nessun risultato disponibile