H2020-IBA-CS2-GAMS-2020-2021

Resultado final

D0.6 Dissemination and Communication Plan 2020

Update of the dissemination and communication plan for ENG-ITD

Data Management Plan report

Publicaciones

THE INTERACTION OF PURGE FLOWS WITH SECONDARY FLOW FEATURES IN TURBINE CENTER FRAMES

Autores: M. Patinios, F. Merli, A. Hafizovic, E. Göttlich
Publicado en: 2021
Editor: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Virtualization of the DLR Turbine Test Facility NG-Turb

Autores: Björn Schneider
Publicado en: 2020
Editor: Springer
DOI: 10.25967/530132

In situ synchrotron X-ray imaging of titanium alloy powder sintering during directed energy deposition additive manufacturing

Autores: Lorna Sinclair, Dr Yunhui Chen, Dr Samuel J. Clark, Sebastian Marussi, David T. Rees, Dr Gavin Baxter, Martyn Jones, Dr Robert Atwood, Dr Chu Lun Alex Leung, Prof. Iain Todd, Prof. Peter D. Lee
Publicado en: 2020
Editor: TMS 2020

Capturing Marangoni flow via Synchrotron Imaging of Laser Blown Powder Directed Energy Deposition

Autores: Samuel J. Clark, Yunhui Chen, Lorna Sinclair, Chu Lun Alex Leung, Sebastian Marussi, Robert C. Atwood, Martyn A. Jones, Gavin J. Baxter, Peter D. Lee
Publicado en: 2020
Editor: MCWASP XV: International Conference on Modelling of Casting, Welding and Advanced Solidification Processes
DOI: 10.1088/1757-899x/861/1/012010

Study on Accuracy of Heat Transfer Coefficient Determination in the Bearing Chamber for Gas Turbine Engine

Autores: Illia Petukhov, Taras Mykhailenko, Sergiy Yepifanov, Oleg Shevchuk
Publicado en: 2020
Editor: ASME

In situ and Operando Synchrotron X-ray Imaging of Porosity Formation in Direct Energy Deposition Additive Manufacturing Process

Autores: Yunhui Chen, Samuel J. Clark, Chu Lun Alex Leung, Lorna Sinclair, Sebastian Marussi, Robert C. Atwood, Thomas Connolley, Martyn A. Jones, Gavin J. Baxter, Peter D. Lee
Publicado en: 2020
Editor: MCWASP XV 2020 Modelling of Casting, Welding and Advanced Solidification Processes
DOI: 10.48550/arXiv.2006.09087

A Cradle to Gate Approach for Life-Cycle-Assessment of Blisk Manufacturing

Autores: Kilian Fricke, Sascha Gierlings, Philipp Ganser, Martin Seimann, Thomas Bergs
Publicado en: 2021
Editor: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Geometry Model and Approach for Future Blisk LCA

Autores: Kilian Fricke, Sascha Gierlings, Philipp Ganser, Tommy Venek, Thomas Bergs
Publicado en: 2021
Editor: IOP Conference Series Materials Science and Engineering

Understanding Directed Energy Deposition Additive Manufacturing Process using In situ and Operando X-ray Imaging and Diffraction

Autores: """Yunhui Chen, Samuel Clark, Sebastian Marussi, David Collins, Martyn Jones, Gavin Baxter, Thomas Connolley, Robert Atwood, Chu-Lun Alex Leung, Peter D. Lee"""
Publicado en: 2020
Editor: Technical Aspects of Synchrotron X-ray and Neutron Measurements for Diffraction Microstructure Imaging (hosted by NIST)

Capturing Pore Formation during Laser Blown Powder Directed Energy Deposition

Autores: Peter D Lee, Yunhui Chen, Lorna Sinclair, CL Alex Leung, Sam Clark, Sebastian Marussi, Robert C. Atwood, Martyn A. Jones, Gavin J. Baxter
Publicado en: 2020
Editor: TMS 2020

Purge and Leakage Flow Effects on the Aerodynamics of a High-Speed Low-Pressure Turbine Cascade

Autores: Lopes, G., Lavagnoli, S., Gendebien, S., Hillewaert, K.
Publicado en: 2020
Editor: ASME Turbo Expo 2020

NUMERICAL OPTIMIZATION OF LINER IMPEDANCE IN ACOUSTIC DUCT

Autores: Kevin Billon, Emanuele de Bono, Matthias Perez, Edouard Salze, Gael Matten, Morvan Ouisse, Maxime Volery, Herve Lissek, Jacky Mardjono
Publicado en: 2020
Editor: ASME

Benefit of mesh adaption vs. conventional CFD approach for nacelle aerodynamics with ground effect

Autores: G.Millot, S.Raynal and A.Laurencin
Publicado en: 2020
Editor: NAFEMS

Blade design and tip clearance flow analysis for a compact high-pressure compressor rear stage

Autores: Christian Peter Köhler, Christian Helcig, Volker Gümmer
Publicado en: 2021
Editor: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics

STUDY OF OIL FILM HEAT TRANSFER IN GAS TURBINE ENGINE BEARING CHAMBER

Autores: Illia Petukhov, Taras Mykhailenko, Oleksii Lysytsia, Artem Kovalov
Publicado en: 2021
Editor: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Overview of joint ITP Aero and University research

Autores: A. López, N. López
Publicado en: 2020
Editor: IEE

DESIGN AND OPTIMIZATION OF PIEZOELECTRIC ACTUATORS FOR AEROACOUSTIC NOISES CONTROL IN A TURBOFAN

Autores: M. Perez, M. Ezzine, K. Billon, V. Clair, J. Marjono, and M. Collet
Publicado en: 2020
Editor: ASME

Turbine Tone Noise Prediction in High Speed Turbines Using a Linearized CFD Solver: Comparison with Measurements

Autores: J. R. Fernández, A. Serrano , G. García
Publicado en: 2021
Editor: AIAA AVIATION 2021 FORUM

Modelling of Partially Wetting Liquid Film Using An Enhanced Thin Film Model For Aero-Engine Bearing Chamber Applications

Autores: K. Singh, M. Sharabi, R. Jefferson-Loveday, S. Ambrose, C. Eastwick, J. Cao, A. Jacobs
Publicado en: 2020
Editor: ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition

Design and Testing of a Multi-Stage IP Turbine for Future Geared Turbofans

Autores: D. Torre Ruiz, G. García-Valdecasas, A. Puenta, D. Hernández, S. Luque, P. Benito
Publicado en: 2021
Editor: ASME Turbo Expo 2021

Quantification for Directed Energy Deposition Additive Manufacturing Process using In situ and Operando X-ray Imaging

Autores: Yunhui Chen, Samuel Clark, Lorna Sinclair, Chu-Lun Alex Leung, Sebastian Marussi, Martyn Jones, Gavin Baxter, Thomas Connolley, Robert Atwood, Graham McCartney, Iain Todd, Peter D. Lee
Publicado en: 2020
Editor: TMS 2020

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

Autores: Yunhui Chen, Samuel J. Clark, David M. Collins, Sebastian Marussi, Simon A. Hunt, Danielle M. Fenech, Thomas Connolley, Robert C. Atwood, Oxana V. Magdysyuk, Gavin J. Baxter, Martyn A. Jones, Chu Lun Alex Leung, Peter D. Lee
Publicado en: Acta Materialia, Edición 209, 2021, Página(s) 116777, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2021.116777

LARGE-EDDY SIMULATION OF A MODEL AERO-ENGINE SOOTING FLAME WITH A MULTIPHYSICS APPROACH

Autores: S. Paccati, D. Bertini, L. Mazzei, A. Andreini and S. Puggelli
Publicado en: Flow Turbulence Combust, 2020, ISSN 1573-1987
Editor: Springer
DOI: 10.1007/s10494-020-00202-5

Modeling of Partially Wetting Liquid Film Using an Enhanced Thin Film Model for Aero-Engine Bearing Chamber Applications

Autores: Kuldeep Singh, Medhat Sharabi, Richard Jefferson-Loveday, Stephen Ambrose, Carol Eastwick, Jing Cao, Adrian Jacobs
Publicado en: Journal of Engineering for Gas Turbines and Power, Edición 143/4, 2021, ISSN 0742-4795
Editor: American Society of Mechanical Engineers
DOI: 10.1115/1.4049663

Melt pool morphology in directed energy deposition additive manufacturing process

Autores: Y Chen, S Clark, A C L Leung, L Sinclair, S Marussi, R Atwood, T Connoley, M Jones, G Baxter, P D Lee
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 861, 2020, Página(s) 012012, ISSN 1757-899X
Editor: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/861/1/012012

In situ X-ray quantification of melt pool behaviour during directed energy deposition additive manufacturing of stainless steel

Autores: Yunhui Chen, Samuel J. Clark, Yuze Huang, Lorna Sinclair, Chu Lun Alex Leung, Sebastian Marussi, Thomas Connolley, Oxana V. Magdysyuk, Robert C. Atwood, Gavin J. Baxter, Martyn A. Jones, Iain Todd, Peter D. Lee
Publicado en: Materials Letters, Edición 286, 2021, Página(s) 129205, ISSN 0167-577X
Editor: Elsevier BV
DOI: 10.1016/j.matlet.2020.129205

Methodology of support modeling for additive process simulation

Autores: T. Laudadio
Publicado en: 2020
Editor: Politecnico di Torino

Derechos de propiedad intelectual

DRIVE UNIT COMPRISING MEANS FOR SELECTIVE COUPLING

Número de solicitud/publicación: 15 817948
Fecha: 2015-11-24
Solicitante(s): SAFRAN HELICOPTER ENGINES

TURBOMACCHINA E GRUPPO INGRANAGGI

Número de solicitud/publicación: 20 2000000652
Fecha: 2020-01-15

SYSTEM AND METHOD OF LOCATING FEATHERING PROPELLER BLADE ANGULAR POSITION

Número de solicitud/publicación: 17 425007
Fecha: 2017-01-30

TRANSMISSION DEVICE FOR SPLITTING TORQUE BETWEEN TWO COAXIAL GEARS, IN PARTICULAR FOR A PLANETARY GEARING FOR AERONAUTIC APPLICATIONS, AND METHOD FOR MANUFACTURING AND ASSEMBLING SAID TRANSMISSION DEVICE

Número de solicitud/publicación: 17 425076
Fecha: 2017-07-21

COMPRESSOR MODULE FOR A TURBOMACHINE AND CORRESPONDING COMPRESSOR ARRANGEMENT

Número de solicitud/publicación: 18 209949
Fecha: 2018-12-04
Solicitante(s): MTU AERO ENGINES AG

Resultado final

Publicaciones

Derechos de propiedad intelectual

Compartir esta página

Descargar