H2020-IBA-CS2-GAMS-2020-2021

Rezultaty

D0.6 Dissemination and Communication Plan 2020

Update of the dissemination and communication plan for ENG-ITD

Data Management Plan report

Publikacje

THE INTERACTION OF PURGE FLOWS WITH SECONDARY FLOW FEATURES IN TURBINE CENTER FRAMES

Autorzy: M. Patinios, F. Merli, A. Hafizovic, E. Göttlich
Opublikowane w: 2021
Wydawca: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Virtualization of the DLR Turbine Test Facility NG-Turb

Autorzy: Björn Schneider
Opublikowane w: 2020
Wydawca: Springer
DOI: 10.25967/530132

In situ synchrotron X-ray imaging of titanium alloy powder sintering during directed energy deposition additive manufacturing

Autorzy: Lorna Sinclair, Dr Yunhui Chen, Dr Samuel J. Clark, Sebastian Marussi, David T. Rees, Dr Gavin Baxter, Martyn Jones, Dr Robert Atwood, Dr Chu Lun Alex Leung, Prof. Iain Todd, Prof. Peter D. Lee
Opublikowane w: 2020
Wydawca: TMS 2020

Capturing Marangoni flow via Synchrotron Imaging of Laser Blown Powder Directed Energy Deposition

Autorzy: Samuel J. Clark, Yunhui Chen, Lorna Sinclair, Chu Lun Alex Leung, Sebastian Marussi, Robert C. Atwood, Martyn A. Jones, Gavin J. Baxter, Peter D. Lee
Opublikowane w: 2020
Wydawca: MCWASP XV: International Conference on Modelling of Casting, Welding and Advanced Solidification Processes
DOI: 10.1088/1757-899x/861/1/012010

Study on Accuracy of Heat Transfer Coefficient Determination in the Bearing Chamber for Gas Turbine Engine

Autorzy: Illia Petukhov, Taras Mykhailenko, Sergiy Yepifanov, Oleg Shevchuk
Opublikowane w: 2020
Wydawca: ASME

In situ and Operando Synchrotron X-ray Imaging of Porosity Formation in Direct Energy Deposition Additive Manufacturing Process

Autorzy: Yunhui Chen, Samuel J. Clark, Chu Lun Alex Leung, Lorna Sinclair, Sebastian Marussi, Robert C. Atwood, Thomas Connolley, Martyn A. Jones, Gavin J. Baxter, Peter D. Lee
Opublikowane w: 2020
Wydawca: MCWASP XV 2020 Modelling of Casting, Welding and Advanced Solidification Processes
DOI: 10.48550/arXiv.2006.09087

A Cradle to Gate Approach for Life-Cycle-Assessment of Blisk Manufacturing

Autorzy: Kilian Fricke, Sascha Gierlings, Philipp Ganser, Martin Seimann, Thomas Bergs
Opublikowane w: 2021
Wydawca: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Geometry Model and Approach for Future Blisk LCA

Autorzy: Kilian Fricke, Sascha Gierlings, Philipp Ganser, Tommy Venek, Thomas Bergs
Opublikowane w: 2021
Wydawca: IOP Conference Series Materials Science and Engineering

Understanding Directed Energy Deposition Additive Manufacturing Process using In situ and Operando X-ray Imaging and Diffraction

Autorzy: """Yunhui Chen, Samuel Clark, Sebastian Marussi, David Collins, Martyn Jones, Gavin Baxter, Thomas Connolley, Robert Atwood, Chu-Lun Alex Leung, Peter D. Lee"""
Opublikowane w: 2020
Wydawca: Technical Aspects of Synchrotron X-ray and Neutron Measurements for Diffraction Microstructure Imaging (hosted by NIST)

Capturing Pore Formation during Laser Blown Powder Directed Energy Deposition

Autorzy: Peter D Lee, Yunhui Chen, Lorna Sinclair, CL Alex Leung, Sam Clark, Sebastian Marussi, Robert C. Atwood, Martyn A. Jones, Gavin J. Baxter
Opublikowane w: 2020
Wydawca: TMS 2020

Purge and Leakage Flow Effects on the Aerodynamics of a High-Speed Low-Pressure Turbine Cascade

Autorzy: Lopes, G., Lavagnoli, S., Gendebien, S., Hillewaert, K.
Opublikowane w: 2020
Wydawca: ASME Turbo Expo 2020

NUMERICAL OPTIMIZATION OF LINER IMPEDANCE IN ACOUSTIC DUCT

Autorzy: Kevin Billon, Emanuele de Bono, Matthias Perez, Edouard Salze, Gael Matten, Morvan Ouisse, Maxime Volery, Herve Lissek, Jacky Mardjono
Opublikowane w: 2020
Wydawca: ASME

Benefit of mesh adaption vs. conventional CFD approach for nacelle aerodynamics with ground effect

Autorzy: G.Millot, S.Raynal and A.Laurencin
Opublikowane w: 2020
Wydawca: NAFEMS

Blade design and tip clearance flow analysis for a compact high-pressure compressor rear stage

Autorzy: Christian Peter Köhler, Christian Helcig, Volker Gümmer
Opublikowane w: 2021
Wydawca: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics

STUDY OF OIL FILM HEAT TRANSFER IN GAS TURBINE ENGINE BEARING CHAMBER

Autorzy: Illia Petukhov, Taras Mykhailenko, Oleksii Lysytsia, Artem Kovalov
Opublikowane w: 2021
Wydawca: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Overview of joint ITP Aero and University research

Autorzy: A. López, N. López
Opublikowane w: 2020
Wydawca: IEE

DESIGN AND OPTIMIZATION OF PIEZOELECTRIC ACTUATORS FOR AEROACOUSTIC NOISES CONTROL IN A TURBOFAN

Autorzy: M. Perez, M. Ezzine, K. Billon, V. Clair, J. Marjono, and M. Collet
Opublikowane w: 2020
Wydawca: ASME

Turbine Tone Noise Prediction in High Speed Turbines Using a Linearized CFD Solver: Comparison with Measurements

Autorzy: J. R. Fernández, A. Serrano , G. García
Opublikowane w: 2021
Wydawca: AIAA AVIATION 2021 FORUM

Modelling of Partially Wetting Liquid Film Using An Enhanced Thin Film Model For Aero-Engine Bearing Chamber Applications

Autorzy: K. Singh, M. Sharabi, R. Jefferson-Loveday, S. Ambrose, C. Eastwick, J. Cao, A. Jacobs
Opublikowane w: 2020
Wydawca: ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition

Design and Testing of a Multi-Stage IP Turbine for Future Geared Turbofans

Autorzy: D. Torre Ruiz, G. García-Valdecasas, A. Puenta, D. Hernández, S. Luque, P. Benito
Opublikowane w: 2021
Wydawca: ASME Turbo Expo 2021

Quantification for Directed Energy Deposition Additive Manufacturing Process using In situ and Operando X-ray Imaging

Autorzy: Yunhui Chen, Samuel Clark, Lorna Sinclair, Chu-Lun Alex Leung, Sebastian Marussi, Martyn Jones, Gavin Baxter, Thomas Connolley, Robert Atwood, Graham McCartney, Iain Todd, Peter D. Lee
Opublikowane w: 2020
Wydawca: TMS 2020

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

Autorzy: Yunhui Chen, Samuel J. Clark, David M. Collins, Sebastian Marussi, Simon A. Hunt, Danielle M. Fenech, Thomas Connolley, Robert C. Atwood, Oxana V. Magdysyuk, Gavin J. Baxter, Martyn A. Jones, Chu Lun Alex Leung, Peter D. Lee
Opublikowane w: Acta Materialia, Numer 209, 2021, Strona(/y) 116777, ISSN 1359-6454
Wydawca: Elsevier BV
DOI: 10.1016/j.actamat.2021.116777

LARGE-EDDY SIMULATION OF A MODEL AERO-ENGINE SOOTING FLAME WITH A MULTIPHYSICS APPROACH

Autorzy: S. Paccati, D. Bertini, L. Mazzei, A. Andreini and S. Puggelli
Opublikowane w: Flow Turbulence Combust, 2020, ISSN 1573-1987
Wydawca: Springer
DOI: 10.1007/s10494-020-00202-5

Modeling of Partially Wetting Liquid Film Using an Enhanced Thin Film Model for Aero-Engine Bearing Chamber Applications

Autorzy: Kuldeep Singh, Medhat Sharabi, Richard Jefferson-Loveday, Stephen Ambrose, Carol Eastwick, Jing Cao, Adrian Jacobs
Opublikowane w: Journal of Engineering for Gas Turbines and Power, Numer 143/4, 2021, ISSN 0742-4795
Wydawca: American Society of Mechanical Engineers
DOI: 10.1115/1.4049663

Melt pool morphology in directed energy deposition additive manufacturing process

Autorzy: Y Chen, S Clark, A C L Leung, L Sinclair, S Marussi, R Atwood, T Connoley, M Jones, G Baxter, P D Lee
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 861, 2020, Strona(/y) 012012, ISSN 1757-899X
Wydawca: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/861/1/012012

In situ X-ray quantification of melt pool behaviour during directed energy deposition additive manufacturing of stainless steel

Autorzy: Yunhui Chen, Samuel J. Clark, Yuze Huang, Lorna Sinclair, Chu Lun Alex Leung, Sebastian Marussi, Thomas Connolley, Oxana V. Magdysyuk, Robert C. Atwood, Gavin J. Baxter, Martyn A. Jones, Iain Todd, Peter D. Lee
Opublikowane w: Materials Letters, Numer 286, 2021, Strona(/y) 129205, ISSN 0167-577X
Wydawca: Elsevier BV
DOI: 10.1016/j.matlet.2020.129205

Methodology of support modeling for additive process simulation

Autorzy: T. Laudadio
Opublikowane w: 2020
Wydawca: Politecnico di Torino

Prawa własności intelektualnej

DRIVE UNIT COMPRISING MEANS FOR SELECTIVE COUPLING

Numer wniosku/publikacji: 15 817948
Data: 2015-11-24
Wnioskodawca/wnioskodawcy: SAFRAN HELICOPTER ENGINES

TURBOMACCHINA E GRUPPO INGRANAGGI

Numer wniosku/publikacji: 20 2000000652
Data: 2020-01-15

SYSTEM AND METHOD OF LOCATING FEATHERING PROPELLER BLADE ANGULAR POSITION

Numer wniosku/publikacji: 17 425007
Data: 2017-01-30

TRANSMISSION DEVICE FOR SPLITTING TORQUE BETWEEN TWO COAXIAL GEARS, IN PARTICULAR FOR A PLANETARY GEARING FOR AERONAUTIC APPLICATIONS, AND METHOD FOR MANUFACTURING AND ASSEMBLING SAID TRANSMISSION DEVICE

Numer wniosku/publikacji: 17 425076
Data: 2017-07-21

COMPRESSOR MODULE FOR A TURBOMACHINE AND CORRESPONDING COMPRESSOR ARRANGEMENT

Numer wniosku/publikacji: 18 209949
Data: 2018-12-04
Wnioskodawca/wnioskodawcy: MTU AERO ENGINES AG

Rezultaty

Publikacje

Prawa własności intelektualnej

Udostępnij tę stronę

Pobierz