H2020-IBA-CS2-GAMS-2020-2021

Risultati finali

D0.6 Dissemination and Communication Plan 2020

Update of the dissemination and communication plan for ENG-ITD

Data Management Plan report

Pubblicazioni

THE INTERACTION OF PURGE FLOWS WITH SECONDARY FLOW FEATURES IN TURBINE CENTER FRAMES

Autori: M. Patinios, F. Merli, A. Hafizovic, E. Göttlich
Pubblicato in: 2021
Editore: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Virtualization of the DLR Turbine Test Facility NG-Turb

Autori: Björn Schneider
Pubblicato in: 2020
Editore: Springer
DOI: 10.25967/530132

In situ synchrotron X-ray imaging of titanium alloy powder sintering during directed energy deposition additive manufacturing

Autori: Lorna Sinclair, Dr Yunhui Chen, Dr Samuel J. Clark, Sebastian Marussi, David T. Rees, Dr Gavin Baxter, Martyn Jones, Dr Robert Atwood, Dr Chu Lun Alex Leung, Prof. Iain Todd, Prof. Peter D. Lee
Pubblicato in: 2020
Editore: TMS 2020

Capturing Marangoni flow via Synchrotron Imaging of Laser Blown Powder Directed Energy Deposition

Autori: Samuel J. Clark, Yunhui Chen, Lorna Sinclair, Chu Lun Alex Leung, Sebastian Marussi, Robert C. Atwood, Martyn A. Jones, Gavin J. Baxter, Peter D. Lee
Pubblicato in: 2020
Editore: MCWASP XV: International Conference on Modelling of Casting, Welding and Advanced Solidification Processes
DOI: 10.1088/1757-899x/861/1/012010

Study on Accuracy of Heat Transfer Coefficient Determination in the Bearing Chamber for Gas Turbine Engine

Autori: Illia Petukhov, Taras Mykhailenko, Sergiy Yepifanov, Oleg Shevchuk
Pubblicato in: 2020
Editore: ASME

In situ and Operando Synchrotron X-ray Imaging of Porosity Formation in Direct Energy Deposition Additive Manufacturing Process

Autori: Yunhui Chen, Samuel J. Clark, Chu Lun Alex Leung, Lorna Sinclair, Sebastian Marussi, Robert C. Atwood, Thomas Connolley, Martyn A. Jones, Gavin J. Baxter, Peter D. Lee
Pubblicato in: 2020
Editore: MCWASP XV 2020 Modelling of Casting, Welding and Advanced Solidification Processes
DOI: 10.48550/arXiv.2006.09087

A Cradle to Gate Approach for Life-Cycle-Assessment of Blisk Manufacturing

Autori: Kilian Fricke, Sascha Gierlings, Philipp Ganser, Martin Seimann, Thomas Bergs
Pubblicato in: 2021
Editore: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Geometry Model and Approach for Future Blisk LCA

Autori: Kilian Fricke, Sascha Gierlings, Philipp Ganser, Tommy Venek, Thomas Bergs
Pubblicato in: 2021
Editore: IOP Conference Series Materials Science and Engineering

Understanding Directed Energy Deposition Additive Manufacturing Process using In situ and Operando X-ray Imaging and Diffraction

Autori: """Yunhui Chen, Samuel Clark, Sebastian Marussi, David Collins, Martyn Jones, Gavin Baxter, Thomas Connolley, Robert Atwood, Chu-Lun Alex Leung, Peter D. Lee"""
Pubblicato in: 2020
Editore: Technical Aspects of Synchrotron X-ray and Neutron Measurements for Diffraction Microstructure Imaging (hosted by NIST)

Capturing Pore Formation during Laser Blown Powder Directed Energy Deposition

Autori: Peter D Lee, Yunhui Chen, Lorna Sinclair, CL Alex Leung, Sam Clark, Sebastian Marussi, Robert C. Atwood, Martyn A. Jones, Gavin J. Baxter
Pubblicato in: 2020
Editore: TMS 2020

Purge and Leakage Flow Effects on the Aerodynamics of a High-Speed Low-Pressure Turbine Cascade

Autori: Lopes, G., Lavagnoli, S., Gendebien, S., Hillewaert, K.
Pubblicato in: 2020
Editore: ASME Turbo Expo 2020

NUMERICAL OPTIMIZATION OF LINER IMPEDANCE IN ACOUSTIC DUCT

Autori: Kevin Billon, Emanuele de Bono, Matthias Perez, Edouard Salze, Gael Matten, Morvan Ouisse, Maxime Volery, Herve Lissek, Jacky Mardjono
Pubblicato in: 2020
Editore: ASME

Benefit of mesh adaption vs. conventional CFD approach for nacelle aerodynamics with ground effect

Autori: G.Millot, S.Raynal and A.Laurencin
Pubblicato in: 2020
Editore: NAFEMS

Blade design and tip clearance flow analysis for a compact high-pressure compressor rear stage

Autori: Christian Peter Köhler, Christian Helcig, Volker Gümmer
Pubblicato in: 2021
Editore: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics

STUDY OF OIL FILM HEAT TRANSFER IN GAS TURBINE ENGINE BEARING CHAMBER

Autori: Illia Petukhov, Taras Mykhailenko, Oleksii Lysytsia, Artem Kovalov
Pubblicato in: 2021
Editore: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition

Overview of joint ITP Aero and University research

Autori: A. López, N. López
Pubblicato in: 2020
Editore: IEE

DESIGN AND OPTIMIZATION OF PIEZOELECTRIC ACTUATORS FOR AEROACOUSTIC NOISES CONTROL IN A TURBOFAN

Autori: M. Perez, M. Ezzine, K. Billon, V. Clair, J. Marjono, and M. Collet
Pubblicato in: 2020
Editore: ASME

Turbine Tone Noise Prediction in High Speed Turbines Using a Linearized CFD Solver: Comparison with Measurements

Autori: J. R. Fernández, A. Serrano , G. García
Pubblicato in: 2021
Editore: AIAA AVIATION 2021 FORUM

Modelling of Partially Wetting Liquid Film Using An Enhanced Thin Film Model For Aero-Engine Bearing Chamber Applications

Autori: K. Singh, M. Sharabi, R. Jefferson-Loveday, S. Ambrose, C. Eastwick, J. Cao, A. Jacobs
Pubblicato in: 2020
Editore: ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition

Design and Testing of a Multi-Stage IP Turbine for Future Geared Turbofans

Autori: D. Torre Ruiz, G. García-Valdecasas, A. Puenta, D. Hernández, S. Luque, P. Benito
Pubblicato in: 2021
Editore: ASME Turbo Expo 2021

Quantification for Directed Energy Deposition Additive Manufacturing Process using In situ and Operando X-ray Imaging

Autori: Yunhui Chen, Samuel Clark, Lorna Sinclair, Chu-Lun Alex Leung, Sebastian Marussi, Martyn Jones, Gavin Baxter, Thomas Connolley, Robert Atwood, Graham McCartney, Iain Todd, Peter D. Lee
Pubblicato in: 2020
Editore: TMS 2020

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

Autori: Yunhui Chen, Samuel J. Clark, David M. Collins, Sebastian Marussi, Simon A. Hunt, Danielle M. Fenech, Thomas Connolley, Robert C. Atwood, Oxana V. Magdysyuk, Gavin J. Baxter, Martyn A. Jones, Chu Lun Alex Leung, Peter D. Lee
Pubblicato in: Acta Materialia, Numero 209, 2021, Pagina/e 116777, ISSN 1359-6454
Editore: Elsevier BV
DOI: 10.1016/j.actamat.2021.116777

LARGE-EDDY SIMULATION OF A MODEL AERO-ENGINE SOOTING FLAME WITH A MULTIPHYSICS APPROACH

Autori: S. Paccati, D. Bertini, L. Mazzei, A. Andreini and S. Puggelli
Pubblicato in: Flow Turbulence Combust, 2020, ISSN 1573-1987
Editore: Springer
DOI: 10.1007/s10494-020-00202-5

Modeling of Partially Wetting Liquid Film Using an Enhanced Thin Film Model for Aero-Engine Bearing Chamber Applications

Autori: Kuldeep Singh, Medhat Sharabi, Richard Jefferson-Loveday, Stephen Ambrose, Carol Eastwick, Jing Cao, Adrian Jacobs
Pubblicato in: Journal of Engineering for Gas Turbines and Power, Numero 143/4, 2021, ISSN 0742-4795
Editore: American Society of Mechanical Engineers
DOI: 10.1115/1.4049663

Melt pool morphology in directed energy deposition additive manufacturing process

Autori: Y Chen, S Clark, A C L Leung, L Sinclair, S Marussi, R Atwood, T Connoley, M Jones, G Baxter, P D Lee
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 861, 2020, Pagina/e 012012, ISSN 1757-899X
Editore: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/861/1/012012

In situ X-ray quantification of melt pool behaviour during directed energy deposition additive manufacturing of stainless steel

Autori: Yunhui Chen, Samuel J. Clark, Yuze Huang, Lorna Sinclair, Chu Lun Alex Leung, Sebastian Marussi, Thomas Connolley, Oxana V. Magdysyuk, Robert C. Atwood, Gavin J. Baxter, Martyn A. Jones, Iain Todd, Peter D. Lee
Pubblicato in: Materials Letters, Numero 286, 2021, Pagina/e 129205, ISSN 0167-577X
Editore: Elsevier BV
DOI: 10.1016/j.matlet.2020.129205

Methodology of support modeling for additive process simulation

Autori: T. Laudadio
Pubblicato in: 2020
Editore: Politecnico di Torino

Diritti di proprietà intellettuale

DRIVE UNIT COMPRISING MEANS FOR SELECTIVE COUPLING

Numero candidatura/pubblicazione: 15 817948
Data: 2015-11-24
Candidato/i: SAFRAN HELICOPTER ENGINES

TURBOMACCHINA E GRUPPO INGRANAGGI

Numero candidatura/pubblicazione: 20 2000000652
Data: 2020-01-15

SYSTEM AND METHOD OF LOCATING FEATHERING PROPELLER BLADE ANGULAR POSITION

Numero candidatura/pubblicazione: 17 425007
Data: 2017-01-30

TRANSMISSION DEVICE FOR SPLITTING TORQUE BETWEEN TWO COAXIAL GEARS, IN PARTICULAR FOR A PLANETARY GEARING FOR AERONAUTIC APPLICATIONS, AND METHOD FOR MANUFACTURING AND ASSEMBLING SAID TRANSMISSION DEVICE

Numero candidatura/pubblicazione: 17 425076
Data: 2017-07-21

COMPRESSOR MODULE FOR A TURBOMACHINE AND CORRESPONDING COMPRESSOR ARRANGEMENT

Numero candidatura/pubblicazione: 18 209949
Data: 2018-12-04
Candidato/i: MTU AERO ENGINES AG

Risultati finali

Pubblicazioni

Diritti di proprietà intellettuale

Condividi questa pagina

Scarica