Large Passenger Aircraft Innovative Aircraft Demonstrator Platform

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

D1.6.3.5-17 Summary of CIRA activities in Q1-2024 towards Flight Tests (GNC integration + Flight Tests prepar...

Report containing a summary of CIRA activities carried out during Q1-2024 in preparation of the Flight Test activities (GNC integration + Flight Tests preparation).

D1.1.12.10-27 SA2FIR Fan module - Instrumented module 1

SA2FIR Fan Module instrumented parts for OGV, splitter, IGV module

D1.1.12.10-21 SA2FIR ADAS - FAT results hardware

SA2FIR ADAS - FAT results hardware RSB, RDAS and MDAS

D1.6.3.3-34 Robustified design of the DEP-SFD

Robustify the DEP-SFD design

D1.6.3.4-14 Robustified DEP-SFD ready for taxi testing

Integration of robustified design in the DEP-SFD

D1.5.4.2-11 Synthesis on improvements on the aero-vibro-acoustic models channel v2

Synthesis on improvements on the aero-vibro-acoustic models channel v2

D1.1.12.10-26 SA2FIR Fan module - Machined parts module 3

SA2FIR Fan Module machined parts for rotor module (spinner, hub, adapter, fairings)

D1.1.10-102 GTD Tests Results Airbus feedback

GTD Tests Results Airbus feedback Budget of 35k€ (Gross)

D1.1.12-41 Test preparation - common test

Preparation for the common AI/SAE WTT @DNW-LLF

D1.6.3.5-16 Ground testing the DEP-SFD

Ground testing the DEP-SFD after the incident to verify robustness for fire risks. The modifications are tested thoroughly on the ground in a simulation facility (‘iron bird’) and in taxi tests and will be integrated in the DEP-SFD.

D1.1.12.10-23 SA2FIR ADAS - Additional DAS hardware

SA2FIR ADAS - Additional DAS hardware (CPDT, DAS modules)

D0-89 LPA Dissemination and Exploitation Plan 2021

LPA Dissemination and Exploitation Plan 2021 as contractually due for the GAM

D0-84 LPA Dissemination and Exploitation Plan 2020

LPA Dissemination and Exploitation Plan 2020 as contractually due in the GAM

Publicaciones

Analyse von Optionen zur Fertigungsoptimierung am HLFC Höhenleitwerk

Autores: Markus Kleineberg, Andreas Schröder, Alexander Bismark, Jörg Nickel
Publicado en: 2021
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)
DOI: 10.5281/zenodo.5995268

"""Numerical Study of Active Flow Separation Control for UHBR Engine Integration on Generic Wing in High-Lift Configuration""(AEC2020 Conference)"

Autores: A. Prachar, J. Ullah, T. Lutz, A. Ayele, S. Segal, M. Smid
Publicado en: 2020
Editor: AEC2020 Conference
DOI: 10.5281/zenodo.4288432

Impact investigation at ONERA

Autores: R. Ortiz; G. Portemont; R.De-Coninck; A.Peroche
Publicado en: 2021
Editor: DLR
DOI: 10.5281/zenodo.5872544

Use of the Flight Test Facility Mock-Ups in the European Clean Sky 2 program

Autores: Victor Norrefeldt, Florian Mayer, Arnav Pathak, Marie Pschirer, Max Kienberger, Andreas Lindner, Sabine Johann, Anna Nagele-Renzl, Michael Buschhaus, Gunnar Grün
Publicado en: 2022
Editor: ICAS

Design Concepts for Stabiliser Leading Edges with HLFC Technology and Bird Strike Resilience

Autores: Ritt, Stefan; Vinot, Mathieu
Publicado en: Edición 2, 2021
Editor: Deutscher Luft- und Raumfahrtkongress 2021 (DLRK)
DOI: 10.5281/zenodo.5994794

Multi-Modal Multi-Party Interaction in the Flight Dec

Autores: Martin Dostal
Publicado en: 2022
Editor: Towards Sustainable Aviation Summit 2022
DOI: 10.5281/zenodo.7713176

GPAHRS – Navigation Enabler for More Autonomous Aircraft (AEC 2020)

Autores: Zdenek Kana, Pavol Malinak, Tomas Vaispacher, Milos Sotak, Libor Slabak, Jan Zlebek, Guillaume Bourely, Alain Guillet, Fabien Garrido
Publicado en: 2020
Editor: AEC 2020
DOI: 10.5281/zenodo.44953

Reynolds Number and Wind Tunnel Wall Effects on the Flow Field arround a Generic UHBR Engine High-Lift Configuration

Autores: J. Ullah, A. Pracha, M. Schmid, A. Seifert, V. Soudakov, T. Lutz
Publicado en: 2019
Editor: 3AF International Conference
DOI: 10.5281/zenodo.4284874

ACOUSTIC ABSORPTION IN BUSINESS JETS CABIN

Autores: Y. Revalor
Publicado en: 2023
Editor: ISAE and ONERA
DOI: 10.5281/zenodo.10204281

Combined Hot Isostatic Pressing and Rapid Quenching as a post processing option for AM parts

Autores: D. Ugues, E. Bassini, G. Marchese, A. Sivo, P.A. Martelli
Publicado en: 2021
Editor: International Conference on processing & manufacturing of advanced materials - THERMEC 2021
DOI: 10.5281/zenodo.5749225

High-speed manufacturing of HLFC structures by laser micro drilling (LIM 2019)

Autores: Stephen, Andreas; Ocana, Roberto; Esmoris, Joseba; Wernera, Christian; Soriano, Carlos; Vollertsen, Frank; Sanchez, Rafael
Publicado en: 2019
Editor: Lasers in Manufacturing Conference 2019
DOI: 10.5281/zenodo.3908227

Applying automotive industry materials and manufacturing processes in the aerospace industry in order to reduce cost

Autores: Aliage Maraver, Luis; Egurrola, Dr. José Javier; Castillo Acero, Miguel Á.
Publicado en: 2022
Editor: CS2 Joint Undertaking
DOI: 10.5281/zenodo.4439579

Design and manufacturing of a Cargo Door Surround Structure (cDSS) using new technologies for thermoplastic based carbon fibre composites

Autores: Carlos Bello
Publicado en: CS2 technology progress – contribution to the environmental performance of the next generation of aircraft, 2021
Editor: University Carlos III of Madrid (UC3M) together with AERnnova Aerospace SA and CDTI
DOI: 10.5281/zenodo.6496833

ROBUST ASSEMBLY - QUALITY ASSURED WELDING TECHNOLOGIES FOR FULL-SCALE APPLICATIONS

Autores: Endraß, Manuel; Engelschall, Manuel; Mayer, Monika; Gänswürger, Philipp; Vistein, Michael; Schönheits, Manfred; Jarka, Stefan; Bauer, Simon; Fischer, Frederic; Schuster, Alfons; Larsen, Lars-Christian; Ferstl, Stefan; Kupke, Michael
Publicado en: SAMPE Europe Conference 2022 Hamburg - Germany, 2022
Editor: SAMPE - Society for the Advancement of Material and Process Engineering

AUTOMATED JOINING AND ASSEMBLY OF THERMOPLASTIC FUSELAGE STRUCTURES FOR THE AIRCRAFT FACTORY OF TOMORROW

Autores: Diehl, Benjamin; Kothe, Simon; Niermann, Dirk; Wolf, Michael; Chen, Lin
Publicado en: 2020
Editor: AEC2020
DOI: 10.5281/zenodo.6545033

Advancements and challenges of MEMS microphones in aeroacoustics: A comprehensive overview

Autores: Spehr, Carsten; Ahlefeldt, Thomas; Ernst, Daniel
Publicado en: 2023
Editor: DGLR

Overview of the DLR activities in Clean Sky 2 regarding novel configurations and hybrid electric aircraft

Autores: T. Hecken, M. Iwanizki, M. J. Arzberger, D. Silberhorn, M. Plohr
Publicado en: 2021
Editor: American Institute of Aeronautics and Astronautics SciTech2021

Design and Validation of a Pilot Stress Monitoring System based on a Deep Convolutional Neural Network Model

Autores: Jaime Meneses (Airbus DS) Oscar Miranda (Airbus DS) Ignacio Sanchez (Airbus DS) Cesar Alvarez (Airbus DS) Pablo Rodriguez (Airbus DS)
Publicado en: 2021 IEEE/AIAA 40th Digital Avionics Systems Conference (DASC), 2021, ISBN 978-1-6654-3420-1
Editor: IEEE
DOI: 10.1109/dasc52595.2021.9594363

European Conference on Multifunctional Structures EMuS 2020

Autores: Dr. Johan Kos, Prof. Xavier Martinez and Dr. Harmen Schippers
Publicado en: 2020, ISBN 978-84-121101-6-6
Editor: CIMNE

Propagation of acoustic waves in axially varying ducts with potential flow using the multimodal formulation

Autores: B. Mangin et al.
Publicado en: 2022
Editor: AIAA/CEAS
DOI: 10.2514/6.2022-3098

Performance of Forward-Swept and Backward-Swept Stabilizers in a V-tail Configuration

Autores: R.C.M. Cheung, D. Rezgui and J.E. Cooper R.B. Green R.C. Llamas Sandín
Publicado en: 2022
Editor: AIAA
DOI: 10.2514/6.2023-2458

Simulation of a Distributed Propulsion system in a Wind Tunnel

Autores: Dustin Bongen, Mário Firnhaber Beckers, Michael Schollenberger, Dominique P. Bergmann, Thorsten Lutz, Alex Gothow, Mahmod Saeed, Julien Weiss, Andreas Bardenhagen and Rolf Radespiel
Publicado en: 2022
Editor: AIAA
DOI: 10.2514/6.2022-3818

Light Weight Eye Visor for commercial pilot use: Human Factors assessment of novel functionalities

Autores: Cesar Alvarez Pablo Rodriguez
Publicado en: 2021 IEEE/AIAA 40th Digital Avionics Systems Conference (DASC), 2021, ISBN 978-1-6654-3420-1
Editor: IEEE
DOI: 10.1109/dasc52595.2021.9594307

Developments of DIC techniques for propeller blade deformation measurements and in-flight applications

Autores: Kirmse, Tania; Boden, Fritz
Publicado en: 2023
Editor: DGLR

Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM)

Autores: E. Bassini, A. Sivo, G. Marchese, P. Martelli, F. Calignano, S. Biamino, D. Ugues
Publicado en: 2021
Editor: Associazione Italiana di Metallurgia
DOI: 10.5281/zenodo.5749390

Influence of the Process Parameters on the Densification and Microstructure of Ni-based Superalloys with Different Amount of γ′ Former Alloying Elements Processed by SLM

Autores: G. Marchese, S. Parizia, A. Sivo, E. Bassini, F. Calignano, S. Biamino, D. Ugues
Publicado en: 2020
Editor: TMS 2020 Annual Meeting & Exhibition
DOI: 10.5281/zenodo.4153367

"""Bayesian reconstruction of goal orientated error fields in large aerospace finite element models- contribution to multi-scale predictive design""(AEC2020 Conference)"

Autores: Matthew Bonney, Richard Evans, James Rouse, Arthur Jones, Maxime Hamadi
Publicado en: 2020
Editor: Aerospace Europe Conference 2020

Evaluation of a next generation oxygen system – assessment of usability, comfort and human performance

Autores: Julia Maier, Frank Albers, Oubaid, Fromage, Duputy
Publicado en: 2022
Editor: Transportation Research Procedia
DOI: 10.1016/j.trpro.2022.12.011

"""Alternative materials and process for aeronautical structural part manufacturing""(AEC2020 Conference)"

Autores: José Javier Egurrola, Miguel Ángel Castillo, Luis Aliaga
Publicado en: 2020
Editor: Aerospace Europe Conference (AEC)

Flight Testing of Low-Cost Inertial Navigation System with Dual Antenna GPS Heading Functionality in Polar Region

Autores: Radek Baranek, Radek Reznicek, Pavol Malinak, Radu Cioaca
Publicado en: 2022
Editor: ION GNSS+ 2022
DOI: 10.5281/zenodo.7347559

A comparison of different approaches to study the porosity and surface defects for Electron Beam Melting

Autores: C. Ghibaudo, G. Rizza, G. Marchese, M. Galati, L. Iuliano, D. Ugues, S. Biamino
Publicado en: 2021
Editor: European Powder Metallurgy Association
DOI: 10.5281/zenodo.5749375

Numerical modelling of aeronautical composite structure subjected to lightning strike phenomenon

Autores: Martín de la Escalera, Federico; Briones, Ignacio; Essa, Yasser
Publicado en: 2019
Editor: EASN
DOI: 10.5281/zenodo.3923773

Inline Quality Control for Thermoplastic Automated Fiber Placement by 3D Profilometry

Autores: Schuster, Alfons; Mayer, Monika; Brandt, Lars; Deden, Dominik; Krebs, Florian; Kupke, Michael
Publicado en: Edición 2, 2021
Editor: SAMPE Europe Conference 2021

Produktionskostenschätzung im Kontext von HLFC Win (DLRK2020)

Autores: Johanna-Lisa Pauly, Ahmad Ali Pohya, Kai Wicke
Publicado en: 2020
Editor: Deutscher Luft- und Raumfahrt Kongress (DLRK2020)
DOI: 10.5281/zenodo.4018953

Laminarity: a promising way to meet future environmental challenges

Autores: T. Delille
Publicado en: 2022
Editor: 3AF
DOI: 10.5281/zenodo.10203502

Effect of tolerances of surface irregularities on laminar-turbulent transition for HLFC wings

Autores: Juan Alberto Franco, Stefan Hein
Publicado en: 2022
Editor: Association Aéronautique et Astronautique de France

DASC Conference - Internet Protocol Suite for Safety Services Validation with Next Generation Avionics

Autores: Enrique Mene-Lopez (Airbus) Luc Emberger (Airbus) Michal Skorepa (Honeywell) Michael L. Olive (Honeywell)
Publicado en: 2021
Editor: 40th DASC Conference
DOI: 10.5281/zenodo.5643155

"""Miniature airworthy fiber optic pressure sensor for measuring static pressure and acoustics""(AEC2020 Conference)"

Autores: Sascha Kienitz, Markus Schmid
Publicado en: 2020
Editor: AEC2020 Conference
DOI: 10.5281/zenodo.4283999

Failure of Thermoplastic Composite Welded Joints

Autores: Bas H.A.H. Tijs, Albert Turon and Chiara Bisagni
Publicado en: 2021
Editor: Scipedia
DOI: 10.23967/composites.2021.043

Monitoring micro-drilling of large Ti plates using single laser pulses for HLFC applications (LIM 2019)

Autores: Ocana, Roberto; Soriano, Carlos; Esmoris, Jose I.; Sanchez, Rafael
Publicado en: 2019
Editor: Lasers in Manufacturing Conference 2019
DOI: 10.5281/zenodo.3908198

Investigation and modelling of cargo hold fire suppressionagent concentration profiles for Halon replacement

Autores: Victor Norrefeldt, Arnav Pathak, Marie Pschirer, Max Kienberger
Publicado en: 2022
Editor: FAA

A320 ATRA Flugversuche mit einem HLFC System im Seitenleitwerk

Autores: Geza Schrauf, Heiko Freiherr Geyr von Schweppenburg
Publicado en: 2021
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)

Applying automotive industry materials and manufacturing processes in the aerospace industry in order to reduce cost

Autores: Luis Aliaga (AERNNOVA), Dr. José Javier Egurrola (LEARTIKER)
Publicado en: 2020
Editor: CS2 - Composite Material Manufacturing Virtual Workshop
DOI: 10.5281/zenodo.4439578

The influence of high spanwise chamber extent on HLFC performance

Autores: Kilian, Thomas; Bismark, Alexander Heinz; van de Kamp, Bram; Schröder, Andreas
Publicado en: Edición 2, 2021
Editor: Deutscher Luft- und Raumfahrtkongress 2021 (DLRK)
DOI: 10.5281/zenodo.5995052

Effect of Surface Irregularities on Boundary-Layer Transition on HLFC Wings studied by AHLNS

Autores: Juan Alberto Franco and Stefan Hein
Publicado en: 2021
Editor: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655990

New advanced manufacturing process for rear fuselage sections of highly integrated aerospace structures

Autores: G. Nuñez-Márquez, P. Tabarés-Fernández, M. Mora-Mendías.
Publicado en: 2022
Editor: AEMAC
DOI: 10.5281/zenodo.7319475

Development of the lower half of the Multifunctional Fuselage Demonstrator

Autores: S.L. Veldman, J. Kos, I. Fernandez-Villegas
Publicado en: 2021
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.5281/zenodo.7350893

THE IMPORTANCE OF ACCOUNTING FOR LARGE SHEAR DEFORMATIONS ON MODELLING MATRIX FAILURE OF THERMOPLASTIC AND THERMOSET COMPOSITES

Autores: Tijs, B.H.A.H; Bisagni, C.; Turon, A.
Publicado en: 2019
Editor: ECCOMAS
DOI: 10.5281/zenodo.7350788

Overview of LPA context & ongoing activity – Active Cockpit

Autores: Jean-Jacques Fagot, Manuel Nuñez Jimenez, et. al.
Publicado en: 2020
Editor: CS2 LPA PT3, CSJU
DOI: 10.5281/zenodo.4264385

HLFC-WIN: Suction Rib Infusion – The Digital Infusion Center in Action

Autores: Kleineberg, Markus; Bertling, Dominic; van de Kamp, Bram
Publicado en: 2020
Editor: Cleansky 2 Composite Materials and Manufacturing Workshop
DOI: 10.5281/zenodo.4501222

Flight procedures automation: Towards flight autonomy in manned aircraft

Autores: Gonzalez Garcia-Consuegra, Maria Isabel; Alvarez Díez, Cesar; Gracia Bardaji, Alejandro
Publicado en: 2020
Editor: Digital Avionics System Conference (DASC)
DOI: 10.5281/zenodo.4090930

Upscaling of In-situ Automated Fiber Placement with LM-PAEK – From Panel to Fuselage

Autores: Dominik Deden, Lars Brandt, Lukas Raps, Ines Schiel, Dietfried Henning, Samuel Tröger, Frederic Fischer
Publicado en: 2022
Editor: EPFL

Building the MFFD upper shell - Production technologies for the world's largest thermoplastic composite structure

Autores: Frederic Fischer
Publicado en: 2022
Editor: American Institute of Aeronautics and Astronautics

Analysis and testing of a thermoplastic composite stiffened panel under compression

Autores: K.S. van Dooren, E. Labans, B.H.A.H. Tijs, J. Waleson and C. Bisagni
Publicado en: 2019
Editor: 22nd International Conference on Composite Materials

UBBICK - Utility Building Blocks for Integrated Cockpit

Autores: Nuno Paiva
Publicado en: AED days - National showcase 2018, 2018
Editor: AED
DOI: 10.5281/zenodo.6619331

Development of a highly adaptable method for structural integrity assessment by means of a removable piezoelectric measurement head for electromechanical impedance determination

Autores: Y Park, C. Contell Asins, D. Laveuve, M. Brandt, S. Rieß, M. Gerhardt
Publicado en: Proceedings of ISMA2020 including USD2020, 2020, ISBN 978-90-828931-1-3
Editor: ISMA

DESIGN OF AN ACTIVE NOISE CONTROL SYSTEM FOR A BUSINESS JET WITH TURBOFAN ENGINES

Autores: Malte Misol, Stephan Algermissen, Hans-Peter Monner
Publicado en: 2023, ISBN 978-80-11-03423-8
Editor: 29th International Congress on Sound and Vibration

CS2 System Integration Test Bench (V1)

Autores: M DEMEULENAERE
Publicado en: 2021
Editor: ETTC21: European Test & Telemetry Conference 2021
DOI: 10.5281/zenodo.5642629

Trajectory optimization for the computation of safe emergency trajectories

Autores: ONGALE-OBEYI Maeva GOUBINAT Damien GAROCHE Pierre-Loïc DELAHAYE Daniel
Publicado en: 2022
Editor: EUCASS 2022
DOI: 10.13009/eucass2022-4593

Introduction and overview of the WP1.2.3

Autores: Thomas Haase; Roland Ortiz; Myriam Kaminski; Eberhard Kaulfersch; Yves Toso; Steffen Opitz; Till Julian Adam; Marc Garbade; Lars Trampe
Publicado en: 2021
Editor: Clean Sky 2 JU
DOI: 10.5281/zenodo.5849618

Measurement methods fusion and application for fluid-structure coupling analysis using PSP/TSP and event-based-imaging-techniques

Autores: Henning, Katarina; Hilfer, Michael; Kirmse, Tania; Boden, Fritz
Publicado en: 2023
Editor: DGLR

Production of the MFFD upper fuselage shell

Autores: Frederic Fischer
Publicado en: 2023
Editor: American Institute of Aeronautics and Astronautics

Multidisciplinary Investigation of Partially Turboelectric, Boundary Layer Ingesting Aircraft Concepts CleanSky2 LPA WP1.6.1 special session

Autores: Daniel Silberhorn, Max J. Arzberger, Maximilian Mennicken, Florian Wolters, Carsten Hollmann, Michael Iwanizki
Publicado en: AIAA Scitech 2020 Forum, 2020, ISBN 978-1-62410-595-1
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2020-0504

Innovative manufacturing and MRO -Digitalization of maintenance operations (AeroDays 2019)

Autores: Franz Zafra-Evers; Joel Ferreira
Publicado en: 2019
Editor: AeroDays 2019
DOI: 10.5281/zenodo.4010168

Validation of the simulation tool for environmentally friendly aircraft cargo fire protection system

Autores: Arnav Pathak, Victor Norrefeldt
Publicado en: IOP Conference Series Materials Science and Engineering, 2021
Editor: IOP Publishing
DOI: 10.1088/1757-899x/1024/1/012091

Validation of the zonal model for an Environmentally Friendly Aircraft Cargo Fire Protection System with containerized load

Autores: Arnav Pathak, Marie Pschirer, Max Kienberger, Victor Norrefeldt
Publicado en: 2021
Editor: EASN
DOI: 10.5281/zenodo.7603439

Refined multidisciplinary design and performance of the ONERA Hybrid Electric Distributed Propulsion Concept (DRAGON)

Autores: C. Döll, Peter Schmollgruber, David Donjat, Michael Ridel, Italo Cafarelli, Olivier Atinault, et al.
Publicado en: 2021
Editor: AIAA SciTech 2021
DOI: 10.2514/6.2020-0501

Zonal model validation for an environmentally friendly aircraft cargo fire protection system with containerized load

Autores: Arnav Pathak, Marie Pschirer, Maximilian Kienberger, Victor Norrefeldt
Publicado en: 2022
Editor: ICAS

Transition Prediction for Flows with Suction Using the eN-Method

Autores: Normann Krimmelbein
Publicado en: 2022
Editor: CIMNE
DOI: 10.2514/6.2021-0630

Quality assured fuselage production: Data evaluation of a quality control sensor for thermoplastic automated fiber placement

Autores: Monika Mayer, Alfons Schuster, Demas Schmorell, Dominik Deden, Lars Brandt, Frederic Fischer
Publicado en: 2022
Editor: DGLR e.V.
DOI: 10.25967/570129

"""An Overview of the Conceptual Design Studies of Hybrid Electric Propulsion Air Vehicles in the Frame of Clean Sky2 Large Passenger Aircraft""(AEC2020 Conference)"

Autores: Peter Schmollgruber, Sebastien Defoort, Maurice Hoogreef, Reynard de Vries, Jos Vankan, Wim Lammen, Thomas Zill, Michael Iwanizki
Publicado en: 2020
Editor: Aerospace Europe Conference (AEC)
DOI: 10.5281/zenodo.3899710

Laminar Interface Concept for a HLFC Horizontal Tailplane Leading Edge, Design and Manufacturing Approach

Autores: Martin Johannes Schollerer, Christian Ückert, Christian Hühne
Publicado en: 2021
Editor: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655818

DESIGN OF AN ADVANCED EMPENNAGE AND REAR FUSELAGE CONCEPT FOR A COMMERCIAL AIRCRAFT

Autores: Raul C. Llamas Sandín, Caleb D. Handal Rivera
Publicado en: 2022, ISSN 2958-4647
Editor: International Council of the Aeronautical Sciences

Optimization of DDP test parameters through DoE for AFP process improvement

Autores: Dreher, P.N.; Chadwick, A.; Doll, G.
Publicado en: ITHEC 4th International Conference & Exhibition on Thermoplastic Composites, 2018, ISBN 978-3-933339-31-7
Editor: Trageser GmbH

Energy Optimization of Single Aisle Aircraft with Hybrid Electric Propulsion

Autores: Wim Lammen, Jos Vankan
Publicado en: AIAA Scitech 2020 Forum, 2020, ISBN 978-1-62410-595-1
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2020-0505

Aero-Propulsive and Aero-Structural Design Integration of Turboprop Aircraft with Electric Wingtip-Mounted Propellers

Autores: Quinty van der Leer & Maurice Hoogreef
Publicado en: 2022
Editor: AIAA
DOI: 10.2514/6.2022-0167

Cargo Container Characterization for Airplane Crash Applications – Experimental Tests and Validation of Simulation Models (ASIDIC 2019)

Autores: Matthias Waimer, Paul Schatrow
Publicado en: 2019
Editor: Aerospace Structural Impact Dynamics International Conference 2019

Book-keeping Investigations for BLI Aircraft

Autores: Ye-Bonne Maldonado, Panagiotis Giannakakis, Benoit Rodriguez, Nicolas Tantot
Publicado en: AIAA Propulsion and Energy 2020 Forum, 2020, ISBN 978-1-62410-602-6
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2020-3521

"Conceptual Design Studies of ""Boosted Turbofan"" Configuration for short range (SciTech2020)"

Autores: Hecken, Tobias; Zhao, Xin; Iwanizki, Michael; Arzberger, Max J.; Silberhorn, Daniel; Plohr, Martin; Kyprianidis, Konstantinos; Sahoo, Smruti; Valente, Giorgio; Sumsurooa, Sharmila; Sielemann, Michael; Coïc, Clément; Bardenhagen, Andreas; Scheunemann, Annika; Jacobs, Claire
Publicado en: 2020
Editor: AIAA
DOI: 10.5281/zenodo.3899785

Manufacturing and reinforcement technologies for the next generation aircraft rear end: part 2

Autores: Haase, Thomas; Kolbe, Andreas; Nguyen, Duy Chinh; Toso, Yves; Adam, Till Julian
Publicado en: Edición 2, 2021
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt
DOI: 10.5281/zenodo.5412007

A cohesive phase-field model for intra-laminar damage in fabric composite laminates (CFRAC VI)

Autores: Martín de la Escalera, Federico; Essa, Yasser; Pillai, Udit; Triantafyllou, Savvas; Ashcroft, Ian
Publicado en: 2019
Editor: CFRAC VI - International Conference on Computational Modeling of Fracture and Failure of Materials and Structures
DOI: 10.5281/zenodo.3967388

Advanced methodologies for conceptual design of commercial aircraft empennages

Autores: Eduardo González Hernando, Fermín Navarro Medina, Jose Omar Martínez Lucci and Miguel Ángel González Hernández
Publicado en: 2019
Editor: EUCASS
DOI: 10.13009/eucass2019-290

Clean Sky 2 LPA DISruptive COckpit Large Aircraft demonstrator

Autores: Gennaro Formisano
Publicado en: 2024
Editor: AIAA SciTech
DOI: 10.2514/6.2024-2533

Development of a Medium/Long-Haul Reference Aircraft

Autores: Benjamin Fröhler, Jannik Häßy, Mohammad Abu-Zurayk
Publicado en: 2022
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.

DISruptive COckpit demonstrator for Large Aircraft

Autores: FORMISANO, Gennaro
Publicado en: Edición 1, 2023
Editor: GENNARO FORMISANO
DOI: 10.5281/zenodo.8304716

High-speed wind-tunnel investigation of major aerodynamic challenges for HLFC technology

Autores: Fabien Mery, Jean-Luc Godard, Maxime Forte, Guillaume Arnoult, Philippe Bardoux, Christophe François, Estelle Piot
Publicado en: 56th 3AF International Conference on Applied Aerodynamics, 2022
Editor: 3AF

HLFC Leading Edge in Automated Autoclave Infusion

Autores: Markus Kleineberg
Publicado en: 2021
Editor: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655803

Suction and pulsed blowing for control of local wing-engine-slat-cut out flow separation: The INAFLOWT Project

Autores: Monat Shay, Maayan Posti, Bar Mizrahi, Ariel Yaniv, Avraham Seifert, Ofek Drori
Publicado en: AIAA AVIATION 2020 FORUM, 2020, ISBN 978-1-62410-598-2
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2020-2953

CFD Investigation of High-Lift Propeller Positions for a Distributed Propulsion System

Autores: Mário Firnhaber Beckers, Michael Schollenberger, Thorsten Lutz, Dustin Bongen, Rolf Radespiel, Juan Luis Florenciano and David Ernesto Funes-Sebastian
Publicado en: 2022
Editor: AIAA
DOI: 10.2514/6.2022-3217

The XDC - an overview on the CleanSky 2 demonstrator on common numerical methods and experimental means

Autores: Boden, Fritz
Publicado en: Edición 3, 2023
Editor: DGLR

Impact of Cloud Encounter Mitigation Procedures on Operational and Economic Effectiveness of HLFC Aircraft

Autores: Kai Wicke, Florian Linke, Alexander Lau, Kristof Risse, Ahmad Ali Pohya, Benjamin Lührs, Majed Swaid
Publicado en: AIAA SciTech Forum 2017, 2017
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2017-1626

IMAGE BASED LANDING SOLUTIONS FOR LARGE PASSENGER AIRCRAFT - IMBALS

Autores: Thierry SAMMOUR SAWAYA
Publicado en: 2023
Editor: ICMAE
DOI: 10.5281/zenodo.8370543

Residual Stresses and Springback Predictive Model (EASN 2019)

Autores: Federico Martín de la Escalera, Yasser Essa, Daniela Herrero
Publicado en: 2019
Editor: 9th EASN International Conference (EASN 2019)
DOI: 10.5281/zenodo.3908275

Assessment-based eco-efficiency estimation of composite and hybrid structures in commercial aircraft

Autores: Ali Al-Lami and Markus Kleineberg
Publicado en: 2022
Editor: University of New Brunswick Fredericton NB E3B 5A3 Canada

"""Wall Shear Stress Measurements of Magnitude and Direction in non-steady flows""(AEC2020 Conference)"

Autores: M. Staats, J. Weiss
Publicado en: 2020
Editor: AEC2020 Conference
DOI: 10.5281/zenodo.4284008

Aerodynamical design and analysis of HLFC wings within the European Project HLFC-WIN

Autores: Thomas Streit; Martin Kruse; Thomas Kilian; Judith v. Geyr Schweppenburg; Ilias Petropoulos
Publicado en: 2022
Editor: International Council of the Aeronautical Sciences

LATTICE BOLTZMANN METHOD FOR BROADBAND NOISE PREDICTIONS ON A TURBULENCE-CASCADE TEST RIG INCLUDING SERRATED VANES

Autores: M. Buszyk et al.
Publicado en: 2022
Editor: ICAS

Pure-Inertial AHRS for Navigation of Accelerated Vehicles at High Latitudes

Autores: Pavol Malinak
Publicado en: 2021
Editor: The Institute of Navigation (ION GNSS+ 2021)
DOI: 10.33012/2021.18036

"""Towards a thermoplastic upper shell demonstrator - Production technologies for future fuselages""(Deutscher Luft- und Raumfahrtkongress (DLRK))"

Autores: F. Fischer, S. Ferstl et al.
Publicado en: 2020
Editor: DGLR - Deutsche Gesellschaft für Luft- und Raumfahrt

Selection of Alternative Material For High Velocity Impact: Numerical And Experimental Validation Of Performance And Weight Saving

Autores: R. Ortiz, Y. Toso, G.Portemont, N. Toso-Pentecôte, D. Joly
Publicado en: 2019
Editor: Archive ouverte HAL

Structural concept of ECHO - Hybrid bonding and laminar joints

Autores: Schollerer, Martin and Ueckert, Christian and Huehne, Christian
Publicado en: 2022
Editor: Technical University Braunschweig - Institute of Mechanics and Adaptronics
DOI: 10.5281/zenodo.7248366

How to ready production technologies for a thermoplastic composite fuselage

Autores: Frederic Fischer
Publicado en: 2022
Editor: Carbon Fiber 2022

Process data driven advancement of robot-based continuous ultrasonic welding for the dust-free assembly of future fuselage structures (ITHEC 2020)

Autores: L. Larsen, D. Görick, M. Engelschall, F.J.C. Fischer, M. Kupke
Publicado en: 2020, ISBN 978-90-829101-1-7
Editor: 5th International Conference and Exhibition on Thermoplastic Composites

Towards the multimodal detection of sleep in pilots (AEC 2020)

Autores: Hicham Atassi; Dariia Averkova; Jan Ciganek; Tomas Kopriva; Bohdan Blaha
Publicado en: 2020
Editor: Aerospace Europe Conference 2020
DOI: 10.5281/zenodo.4303752

Development of a Numerical Framework for Virtual Testing to Support Design of a Next Generation Thermoplastic Multifunctional Fuselage

Autores: Tijs, B.H.A.H.; van Dooren, K.S.; Bisagni, C.; Kos, J.; Martinez, X.; Schippers, H.
Publicado en: European Conference on Multifunctional Structures, 2020
Editor: European Conference on Multifunctional Structures
DOI: 10.23967/emus.2020.005

Improving Horizontal Stabilizer Performance Using Aeroelastic Tailoring

Autores: R.C.M. Cheung, D. Rezgui and J.E. Cooper R.B. Green R.C. Llamas Sandín
Publicado en: 2022
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2022-0017

An adaptive structural excitation system as a tool for structure-borne noise research

Autores: M. Norambuena & R. Winter
Publicado en: 2019
Editor: Proceedings of the 23rd International Congress on Acoustics

Design and Analysis of Thermoplastic Welded Stiffened Panels in Post-buckling

Autores: Kevin van Dooren Chiara Bisagni
Publicado en: 2021
Editor: American Society of Composites

Towards Laminar Bizjets (AEC 2020)

Autores: Thomas Delille, Thomas Proffit
Publicado en: 2020
Editor: Aerospace Europe Conference (AEC)
DOI: 10.5281/zenodo.4247468

Design, test and demonstration of an inverter for HLFC compressor applications utilizing a Model-Based Systems Engineering approach

Autores: Bismark, Alexander Heinz; Juchmann, Patrick; Bertram, Oliver
Publicado en: 2021
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)
DOI: 10.5281/zenodo.5995194

Krenel Density-Based Pattern Classification in Blind Fasteners Installation

Autores: Francisco Javier Martínez de Pisón/ Lutz Deitert
Publicado en: 2017
Editor: International Conference on Hybrid Artificial Intelligence Systems
DOI: 10.1007/978-3-319-59650-1_17

ADVANCEd Aircraft Maintenance 2019

Autores: Franz Zafra-Evers
Publicado en: 2019
Editor: Airbus/DLR
DOI: 10.5281/zenodo.4010144

Laser pretreatment of grade 2 titanium for hybrid Ti/CFRP adhesive joints in tail plane aerospace structures (AB 2019)

Autores: U. Lommatzsch, B. Schneider, K. Thiel, M. Brede, F.M. de la Escalera, E. Yasser
Publicado en: 2019
Editor: 5th international Conference on Structural Adhesive Bonding
DOI: 10.5281/zenodo.3967312

Manufacturing next generation horizontal tail plane (HTP) - the role of surface pretreatment for adhesive joints and functional coatings

Autores: U. Lommatzsch, B. Schneider, Dirk Salz, F.M. de la Escalera
Publicado en: 2021
Editor: University Carlos III of Madrid, Clean Sky 2, AERNNOVA
DOI: 10.24406/publica-166

Multimodal Business Jet cockpit Next-generation human-system interaction

Autores: V. Ligier
Publicado en: 2021
Editor: ESTIA
DOI: 10.5281/zenodo.4668648

DISCO Innovation Machine

Autores: Pascal TRAVERSE; Matthieu MAYOLLE
Publicado en: Towards Sustainable Aviation (TSAS), 2022
Editor: 3AF
DOI: 10.5281/zenodo.8037752

Wind Tunnel Experiments with Local Active Flow Control for Aircraft Towards Future Flight Testing (ICAS 2018)

Autores: Vlad Ciobaca, Bruno Stefes, Anton de Bruin, Matthias Bauer, Philipp Schlösser, Niko Bier, Arnoud de Blécourt, Junnai Zhai, Michael Meyer, Jochen Wild
Publicado en: 2018
Editor: ICAS 2018
DOI: 10.5281/zenodo.4288797

Lifetime prediction of composite materials

Autores: M. Kaminski; P. Paulmier
Publicado en: Edición 2, 2021
Editor: DLR
DOI: 10.5281/zenodo.6089038

Suction and pulsed blowing for control of local wing-engine-slat-cut out flow separation: The INAFLOWT Project (AEC 2020)

Autores: Monat Shay, Possti Maayan, Junaid Ullah, Yaniv Ariel, Mizrahi Bar, Drori Ofek, Seifert Avraham
Publicado en: 2020
Editor: AEC2020 Conference
DOI: 10.5281/zenodo.4288403

STUDY OF THE IMPACT OF AZIMUTHAL FLOW DISTORTION ON IN-DUCT ACOUSTIC PROPAGATION USING A MULTIMODAL FORMULATION

Autores: B. Mangin et al.
Publicado en: 2022
Editor: ICAS

Analysis of matrix-dominated failure in thermoplastic composites and conduction welded joints

Autores: Bas H.A.H. Tijs (GKN Fokker & Delft University of Technolog) Albert Turon (University of Girona) Chiara Bisagni (Delft University of Technolog) Joost Koopman (GKN Fokker)
Publicado en: 2024
Editor: GKN Fokker
DOI: 10.5281/zenodo.10512554

Aerodynamic Design and Analysis of HLFC Wings within the European Project HLFC-WIN

Autores: Streit, Thomas; Kruse, Martin; Kilian, Thomas; Petropoulos, Ilias
Publicado en: 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022, Edición 1, 2023, ISSN 2958-4647
Editor: ICAS 2022

"""Highlights for natural laminar wing manufacturing developments""(AEC2020 Conference)"

Autores: Miguel Angel Castillo
Publicado en: 2020
Editor: AEC2020 Conference
DOI: 10.5281/zenodo.3876693

A reduced order model for boundary layer ingestion map prediction at rear-mounted engine nacelle

Autores: D. Cinquegrana, P.L. Vitagliano
Publicado en: 2021
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2021-0993

Optimization of multistep forming process for thermoplastic composite parts - Process parameters and simulation

Autores: D. Nardi, J. Sinke
Publicado en: 2019
Editor: SAMPE

Advanced Reinforcements - Mechanical Properties and Structural Health Monitoring

Autores: Steffen Opitz; Till Julian Adam; Lars Trampe
Publicado en: Edición 2, 2021
Editor: DLR
DOI: 10.5281/zenodo.6089238

Reduced-Order Model for Large Amplitude Vibrations of Flexible Structures Coupled with a Fluid Flow

Autores: T. Flament, J-F. Deü, A. Placzek, M. Balmaseda, D-M. Tran
Publicado en: 2022
Editor: ECCOMAS

Testing and simulation for fatigue master curve generation and small debris and acoustic wear testing at Fraunhofer

Autores: Eberhard Kaulfersch
Publicado en: Edición 2, 2021
Editor: "Closing Session for the work package ""Advanced reinforcements"
DOI: 10.5281/zenodo.6089137

AEROACOUSTIC PERFORMANCES OF A LOW-NOISE AIRFOIL CASCADE WITH SERRATED LEADING EDGES: PREDICTIONS AND MEASUREMENTS

Autores: C. Polacsek et al.
Publicado en: 2022
Editor: ICAS

CERES: Advanced Rear End Structural test program – Low level tests

Autores: K. Muñoz, N. Muñoz, E. Guinaldo, E. Arévalo, M. Jiménez
Publicado en: 2021
Editor: Aernnova Aerospace & University Carlos III of Madrid (UC3M)
DOI: 10.5281/zenodo.5148355

RTM Carbon Fibre Highly Stressed Structural Fuselage Frames

Autores: Carlos Bello
Publicado en: 2021
Editor: Carlos III University & Aernnova

CS2 LPA-D03-PROTECTED: Evaluation of a next generation oxygen system – assessment of usability, comfort and human performance

Autores: Julia Maier; Frank Albers; Victor Oubaid; Matthieu Fromage; Jean-Baptiste Dupuy
Publicado en: 2022
Editor: German Federal Police
DOI: 10.5281/zenodo.7220904

Impact Studies with Reduced Size Aircraft Stabiliser Demonstrators Including Hybrid Laminar Flow Control Technology

Autores: Ritt, Stefan Andreas; Vinot, Mathieu
Publicado en: Edición 2, 2021
Editor: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655872

Active structural excitation as known source for structure-borne noise research

Autores: M. Norambuena & R. Winter
Publicado en: 2019
Editor: Inter Noise 2019

"""Next generation wings for long range aircraft: hybrid laminar flow control technology""(Deutscher Luft- und Raumfahrtkongress 2020)"

Autores: """Thomas Haase, Sven Ropte, Bram van de Kamp, Johanna Pauly, Ali Pohya, Markus Kleineberg, Andreas Schröder, Thomas Killian, Arne Seitz, Thomas Streit, Ulrich Herrmann"""
Publicado en: 2020
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt
DOI: 10.5281/zenodo.4019062

High-resolution vibroacoustic characterization of DLR's Falcon 2000LX ISTAR aircraft

Autores: Winter, Rene; Zettel, Sebastian; Sinske, Julian; Norambuena, Marco
Publicado en: 2022
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)

Angle of Attack Effects on Open Fan Propulsion Systems at Take-Off Conditions

Autores: Stuermer, Arne
Publicado en: 2023
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2023-3305

Towards increased reliability of resistance welded joints for aircraft assembly (ITHEC 2020)

Autores: Manuel Endrass, Philipp Gänswürger, Stefan Jarka, Simon Bauer, Frederic J.C. Fischer, Lorenz Ziche, Lars Larsen and Michael Kupke
Publicado en: 2020
Editor: 5th International Conference and Exhibition on Thermoplastic Composites

γ-TiAl powder characterization in order to explain a case of poor processability by Electron Beam Melting

Autores: C. Ghibaudo, A. Sivo, G. Marchese, D. Ugues, S. Biamino
Publicado en: 2021
Editor: ASMET Euromat 2021 Conference
DOI: 10.5281/zenodo.5749384

Design of hybrid joints CFRP-metal Fracture toughness determination under Mode I and Mode II loading (MECHCOMP2019)

Autores: Federico Martín de la Escalera, Yasser Essa, Agustin Chiminelli
Publicado en: 2019
Editor: 5th International Conference on Mechanics of Composites
DOI: 10.5281/zenodo.3967365

Hail Impact Model for Hybrid Laminar Flow Control (HLFC) Structure (EASN 2019

Autores: Federico Martin de la Escalera; Essa Yasser, Miguel Angel Castillo
Publicado en: 2019
Editor: Europaen Aeronautics Science Network
DOI: 10.5281/zenodo.3908287

Modèle d'endommagement de fatigue en lien avec la microstructure dans un alliage d'aluminium.

Autores: Manon Lenglet, Ann Ask, Samuel Forest
Publicado en: 2022
Editor: MECAMAT

Design concepts for stabilizer leading edges with HLFC technology and bird strike resilience

Autores: S.A. Ritt, M. Vinot
Publicado en: 2021
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)
DOI: 10.5281/zenodo.5994793

A study on the chemical and microstructural optimization of the Ti 48 2 2 alloy processed by Electron Beam Melting

Autores: M. Galati, C. Ghibaudo, G. Rizza, R. Wartbichler, S. Mayer, L. Iuliano, H. Clemens, D. Ugues, S. Biamino
Publicado en: 2020
Editor: International Conference on Electron Beam Additive Manufacturing – EBAM2020
DOI: 10.5281/zenodo.5749363

AUTOMATED CABIN AND CARGO LINING AND HAT RACK INSTALLATION FOR THE AIRCRAFT FACTORY OF TOMORROW

Autores: Brieskorn, Leander
Publicado en: Aerospace Europe Conference 2020, 2020
Editor: Aerospace Europe Conference
DOI: 10.5281/zenodo.6545665

Laminar wing manufacturing developments and demonstrators for validation

Autores: Castillo Acero, Miguel Á.; Martín de la Escalera, Federico; Cruz, David
Publicado en: ECCOMAS CONGRESS 2022, 8th European Congress on Computational Methods in Applied Sciences and Engineering, 2022
Editor: ECCOMAS
DOI: 10.5281/zenodo.6637755

Characterization and analysis of the mode I interlaminar fatigue behaviour of thermoplastic composites considering R-curve effec

Autores: Bas H.A.H. Tijs
Publicado en: 2023
Editor: Composites 2023
DOI: 10.5281/zenodo.8420094

Hybrid Laminar Flow Control Activities within the Frame of Clean Sky 2

Autores: Alexander Bismark, Martin Wahlich, Martin Radestock, Matthieu Milot, Kfir Menchel, David Cruz
Publicado en: 2024
Editor: AIAA
DOI: 10.2514/6.2024-1303

Noise reduction with an optimized scarfed nozzle concept

Autores: A. Menasria, S. Lemaire and C. Richter
Publicado en: 2024
Editor: AIAA
DOI: 10.5281/zenodo.10204102

SHM Detection Capabiity Demonstration. The POD - DoE relationship

Autores: Nicolas Dominguez, Aurelien Rautureau
Publicado en: 2022
Editor: A4A NDT Forum

Full-scale particle image velocimetry under open-air conditions

Autores: Geisler, Reinhard; Agocs, Janos; Boden, Fritz; Erdogu, Oguzhan; Ewald, Selina; Fuchs, Carsten; Kirmse, Tania; Kleindienst, Tobias; Koop, Lars; Philipp, Florian; Schröder, Andreas; Achmus, Melanie; Heider, Jens; Hammer, Jens; Schulze, Timo
Publicado en: 2023
Editor: DGLR

PROCESOS DE ALTA CADENCIA EN SECCIONES TRASERAS DE FUSELAJE

Autores: Gloria Nuñez, Carlos Bello
Publicado en: 2020
Editor: AEMAC

Modèle d’ordre réduit pour les vibrations en grande amplitude destructures flexibles sous écoulement fluide

Autores: T. Flament, J-F. Deü, A. Placzek, M. Balmaseda, D-M. Tran
Publicado en: 2022
Editor: CSMA

Numeric optimization of in-situ consolidated panels with different tape sequence strategies

Autores: Fricke, Daniel
Publicado en: 2021
Editor: SAMPE Europe

Integrated Systems Management: Towards Pilot Workload Reduction and Robustness in Degraded Conditions

Autores: Jérôme TREANTON
Publicado en: AIAA conference: SciTech Forum 2023 USA (National Harbor-MD), 2023
Editor: Jérôme TREANTON
DOI: 10.5281/zenodo.8304783

"""Evaluation of a new OGV architecture for an enhanced energy dissipation""(AEC2020 Conference)"

Autores: E. Laroche, Ph. Reulet, D. Donjat, F.Deliancourt, A. Chassagne, M. Boutaleb
Publicado en: 2020
Editor: AEC2020 Conference

Robotic sequential ultrasonic welding of thermoplastic composites: process development and testing

Autores: Abhas Choudhary, Irene Fernandez Villegas
Publicado en: Proceedings of the ASC 36TH Annual Technical VIRTUAL Conference, 2021
Editor: American Society of Composites

An Analysis of the Influence of Network Effects on Lifecycle Based Aircraft Technology Assessment

Autores: Ahmad Ali Pohya, Jennifer Wehrspohn, Kai Wicke
Publicado en: 2020
Editor: Deutscher Luft- und Raumfahrtkongress 2020
DOI: 10.25967/530039

Multifunctional fuselage demonstrator: thermoplastic composite skin manufacturing developments

Autores: W.M. van den Brink, W.J. Vankan, J. de Kruijk, S.L. Veldman( R. Herrmann
Publicado en: 2021
Editor: II European Conference On Multifunctional Structures (EMuS2020)
DOI: 10.23967/emus.2020.012

Aerodynamic Performance Benefits of Over-the-Wing Distributed Propulsion for Hybrid-Electric Transport Aircraft

Autores: Reynard de Vries & Roelof Vos
Publicado en: 2022
Editor: AIAA
DOI: 10.2514/6.2022-0128

IPS Technology Validation

Autores: Michael Olive
Publicado en: 2019 Integrated Communications, Navigation and Surveillance Conference (ICNS), 2019, Página(s) i-xvi, ISBN 978-1-7281-1893-2
Editor: IEEE
DOI: 10.1109/icnsurv.2019.8735183

Numerical modelling of aeronautical composite structure subjected to lightning strike phenomenon (EASN 2019)

Autores: Federico Martin de la Escalera, Ignacio Briones, Yasser Essa
Publicado en: 2019
Editor: Europaen Aeronautics Science Network
DOI: 10.5281/zenodo.3923774

Special Technology Session 08 - Application of Hybrid Laminar Flow Control for Drag Reduction of Transport AircraftAirbus A320 Flight Tests of the AFLoNext Project with the Vertical Tail Plane Equipped by a Hybrid Laminar Flow Control SystemTransition Prediction for Flows with Suction Using the eN-MethodImpact of Homogenous Suction on the Prediction of Drag and Transition for Transport Aircraft

Autores: Geza Schrauf Geza Schrauf; Heiko von Geyr Normann Krimmelbein Martin Kruse
Publicado en: 2022
Editor: Centre Internacional de Mètodes Numèrics a l'Enginyeria (CIMNE)

Numerical simulation of inductive heating in thermoplastic unidirectional cross-ply laminates

Autores: A.J. de Wit, N. van Hoorn, L. Straathof, W.J. Vankan
Publicado en: Frontiers in Materials, 2023, ISBN 978-2-9701614-0-0
Editor: Frontiers
DOI: 10.3389/fmats.2023.1155322

Incremental Nonlinear Control Allocation for an Aircraft withDistributed Electric Propulsion

Autores: P. de Heer, C.C. de Visser, M.L. Hoogendoorn and H.W. Jentink
Publicado en: 2023
Editor: AIAA
DOI: 10.2514/6.2023-1248

Preliminary investigations towards the water uptake in HLFC

Autores: Alexander Bismark
Publicado en: 2021
Editor: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655669

Towards a thermoplastic fuselage: Production technologies for the upper shell demonstrator

Autores: Fischer, Frederic
Publicado en: 2021
Editor: AIAA Science & Technology 2021 Forum

"""Development of a multifunctional fuselage demonstrator""(AEC2020 Conference)"

Autores: S.L. Veldman, P.K. Kortbeek, R. Herrmann, P.C. Woelcken, J. Kos, I. Villegas-Fernandez
Publicado en: 2020
Editor: Aerospace Europe conference

GPAHRS – New Building Block to Enhance Safety and Availability of Future Aircraft Navigation

Autores: Pavol Malinak, Zdenek Kana, Milos Sotak, Tomas Vaispacher, Radek Baranek, Libor Slabak
Publicado en: Proceedings of the 33rd International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GNSS+ 2020), 2020, Página(s) 262-289, ISBN 0-936406-26-7
Editor: Institute of Navigation
DOI: 10.33012/2020.17574

Développement d’un modèle de flottement gyroscopique prenant en compte la poussée de hélice

Autores: V. de Gaudemaris, A. Olivier, A. Placzek, J.-S. Schotté, L. Blanc, F. Thouverez
Publicado en: 2022
Editor: CSMA

Systematic Approach to Design an Active Hybrid Laminar Flow Control System

Autores: Alexander Heinz Bismark, Oliver Bertram
Publicado en: 2022
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.

Progress of the Lower half of the MultiFunctional Fuselage Demonstrator

Autores: S.L. Veldman, S. Romero Esteban, J. Kos, I. Fernandez Villegas
Publicado en: 2021
Editor: Universidad Carlos III & Aernnova
DOI: 10.5281/zenodo.7351246

Data Representativeness in the Context of Pilot State Monitoring: A Case Study on Sleep and Drowsiness Detection and Certification Challenges

Autores: Stephane Marche; Dariia Averkova; Hicham Atassi; Jan Ciganek; Tomas Kopriva; Bohdan Blaha
Publicado en: 2022
Editor: Towards Sustainable Aviation Summit 2022
DOI: 10.5281/zenodo.7705111

Simulation tool for aircraft cargo environment friendly fire protection system evaluation

Autores: Arnav Pathak, Victor Norrefeldt, Gunnar Grün
Publicado en: 2020
Editor: AEC2020
DOI: 10.5281/zenodo.6531579

Nonlinear vortex lattice method for stall prediction

Autores: Hasier Goitia Raúl Llamas
Publicado en: 2019
Editor: EASN
DOI: 10.1051/matecconf/201930402006

Eddy current simulation and experiments for assessments of inductive heating in uni-directional thermoplastic composites

Autores: A.J. de Wit, N. van Hoorn, L.S. Straathof, W.J. Vankan
Publicado en: ICWAM 2022 International Congress on Welding, Additive Manufacturing and associated non-destructive testing, 8-9 June 2022 - Online, 2023
Editor: NLR

Aeronautical structures by automatic lay-up with thermoplastic composites and material behavior

Autores: Isabel Martín, Fernando Rodríguez Lence
Publicado en: 2018
Editor: Avantage Aquitaine
DOI: 10.5281/zenodo.6536555

Aircraft electrification trends and airframe challenges

Autores: Miguel Ángel Castillo
Publicado en: 2022
Editor: AeroTrends 2022

Surface Toughening – An industrial Approach to increase the Robustness of pure adhesive Joints with film adhesives

Autores: Martin J. Schollerer, Jens Kosmann, Dirk Holzhüter, Carlos Bello-Larroche, Christian Hühne
Publicado en: 2020, ISBN 978-989-9017-17-7
Editor: 1st International Conference on Industrial Applications of Adhesives 2020

Numerical aerodynamic performance assessment of HLFCwing configurations using far-field drag analysis

Autores: Ilias Petropoulos, Thomas Streit, Thomas Kilian, Martin Kruse
Publicado en: 56th Edition of the 3AF International Conference on Applied Aerodynamics, 2022
Editor: 3AF - Aeronautical Association and Astronautics France

Protected: Evaluation eines neuartigen Sauerstoffsystems für Piloten. Erste Ergebnisse

Autores: Maier, Julia; Albers, Frank; Oubaid, Viktor
Publicado en: 2022
Editor: Bundespolizei-Fliegergruppe

Smart structural excitation: Simplifying vibroacoustic research

Autores: Norambuena, Marco
Publicado en: 2022
Editor: DLR

Active control of wing-engine-slat cut-out region flow separation

Autores: M. Possti, A. Yaniv and A. Seifert
Publicado en: 2019
Editor: 3AF International Conference
DOI: 10.5281/zenodo.4288358

Robot-based Continuous Ultrasonic Welding for Automated Production of Aerospace Structures

Autores: M. Engelschall, L. Larsen, F. Fischer, M. Kupke
Publicado en: 2019, ISBN 978-90-829101-1-7
Editor: Society for the Advancement of Material and Process Engineering

Numerical simulation of eddy current generation in uni-directional thermoplastic composites

Autores: Wit, A.J. de Hoorn, N. van Nahuis, B.R. Vankan, W.J.
Publicado en: 2023
Editor: NLR

INFLUENCE OF THE ANGLE BETWEEN ADHERENDS ON ULTRASONIC WELDING OF THERMOPLASTIC COMPOSITES

Autores: Camila B.G. Brito, Julie Teuwen, Clemens Dransfeld, Irene Fernandez Villegas
Publicado en: 2020
Editor: Scipedia
DOI: 10.23967/emus.2020.006

Assessment of numerical simulation for different promising material/concepts for structural reinforcement

Autores: R.Ortiz, G.Portemont, R.De Coninck, A.Peroche
Publicado en: 2021
Editor: Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.6860116

CleanSky2 Advanced Rear End Demonstrator

Autores: E. Guinaldo
Publicado en: 2024
Editor: AIAA
DOI: 10.2514/6.2024-1302

Development of continuous ultrasonic welding for the automated production of aircraft primary structures

Autores: Larsen, L., Engelschall, M.; Jarka, S.; Fischer, F.;
Publicado en: 2019
Editor: 4th Internation Conference & Exhibition on Thermoplastic Composites

Accurate structural excitation through adaptive control (ISMA 2018)

Autores: M. Norambuena, R. Winter & J. Biedermann
Publicado en: 2018
Editor: 28th International Conference on Noise and Vibration engineering

humm3: a flexible, precise heat solution for rapid, controllable and safe layup of thermoplastics (JEC 2019)

Autores: Andreas Kolbe
Publicado en: 2019
Editor: JEC 2019
DOI: 10.5281/zenodo.4035919

PROCESS SIMULATION OF THE IN-SITU AUTOMATED FIBER PLACEMENT PROCESS FOR THERMOPLASTIC COMPOSITES

Autores: D. Fricke and F. Fischer
Publicado en: 2020
Editor: Society for the Advancement of Material and Process Engineering (SAMPE)

"""Array of synthetic jets for large passenger aircraft""(AEC2020 Conference)"

Autores: Mathias Lipowski, Dennis Bäcker
Publicado en: 2020
Editor: TBD
DOI: 10.5281/zenodo.4288382

Generating durable Ti/CFRP adhesive joints for aerospace structures by laser pretreatment

Autores: Uwe Lommatzsch, B. Schneider, K. Thiel, M. Brede, F.M. de la Escalera, Y. Essa
Publicado en: 2020
Editor: CEAS / 3AF
DOI: 10.24406/publica-286

Virtual testing of thermoplastic composites: Towards a hybrid simulation-physical testing pyramid (ECCM18)

Autores: B.H.A.H. Tijs, CS Lopes, A. Turon, C. Bisagni, J. Waleson, J.W. van Ingen, S.L. Veldman
Publicado en: Proceedings of the 18th European Conference on Composite Materials: 24-28th June 2018, Athens, Greece, 2018, ISBN 9781510896932
Editor: 18th European Conference on Composite Materials

Experimental Investigation of Shear Grazing Flow Effects on Extended Tube Acoustic Liners

Autores: Remi Roncen, Delphine Sebbane, Fabien Mery, Estelle Piot, Frank Simon
Publicado en: 2020
Editor: EAA (European Acoustics Association) / SFA (Société Française d'Acoustique)
DOI: 10.48465/fa.2020.0225

Validation of an advanced Turbulent Boundary Layer noise model using low speed wind tunnel tests on a Falcon fuselage

Autores: V. Bonneau, S. Lemaire, V. Fleury, Y. Revalor
Publicado en: 2022
Editor: AIAA
DOI: 10.5281/zenodo.10204173

Internet Protocol Suite for Safety Services: Validation with next generation avionics

Autores: Michal Skorepa, Michael L. Olive
Publicado en: 2021
Editor: DASC
DOI: 10.1109/dasc52595.2021.9594318

Challenges of hybrid laminar flow control (HLFC) in aircraft design and manufacturing (ECCM18)

Autores: Martín de la Escalera, Federico; Essa, Yasser; Castillo Acero, Miguel Á.; Pillai, Udit; Chiminelli, Agustín; Lizaranzu, M.; Maimi, Pere
Publicado en: Edición 2, 2018
Editor: 18th European Conference on Composite Materials (ECCM18)
DOI: 10.5281/zenodo.3967430

TASG – An integrated method for the aerodynamic design of HLFCsystems (DLRK 2020)

Autores: Thomas Kilian, Sven Wedler
Publicado en: 2020
Editor: Deutscher Luft- und Raumfahrtkongress 2020
DOI: 10.5281/zenodo.4019107

CLEAN SKY 2 - Technologies for Pilot Workload Reduction

Autores: Cesar Alvarez - Airbus DS HF specialist Jesus Lapastora - Airbus DS HO Simulation
Publicado en: 2020
Editor: Airbus DS
DOI: 10.5281/zenodo.4090950

Laminar Flow Control along the Attachment Line of a Swept Wing

Autores: Jeanne Methel, Fabien Méry, Olivier Vermeersch, Maxime Forte
Publicado en: 8th European Congress on Computational Methods in Applied Sciences and Engineering, 2022
Editor: ECCOMAS - European Community on Computational Methods in Applied Sciences

High-resolution vibroacoustic measurement and analysis of the DLR ISTAR aircraft to assess engine-induced cabin noise

Autores: Winter, Rene; Zettel, Sebastian; Sinske, Julian; Norambuena, Marco
Publicado en: 2022, ISBN 978-1-906913-42-7
Editor: INTER-NOISE

Resistance Welding of Low-Melt Polyaryletherketone: Process Definition andOptimization

Autores: Manuel Endrass, Anton Thomé, Victor Gadletz, Simon Bauer, Stefan Jarka, Philipp Gänswürger, Frederic Fischer, Stefan Ferstl, Lars Larsen and Michael Kupke
Publicado en: 2022
Editor: EPFL

Manufacturing of the largest thermoplastic fuselage skin in the world

Autores: Robert de Graaf, Joachim de Kruijk
Publicado en: 2021
Editor: NLR

Modern Avionics Challenges

Autores: Nuno Paiva
Publicado en: 2019
Editor: Airline Suppliers
DOI: 10.5281/zenodo.6628984

Application of Lightning Strike Protection on Thermoplastic Structures by Automated Fiber Placement (IHTEC 2020)

Autores: Chinh Nguyen; Andreas Kolbe; Constantin Bäns
Publicado en: 2020
Editor: 5th International Conference and Exhibition on Thermoplastic Composites
DOI: 10.5281/zenodo.4088564

Energy efficiency improvements in the development of new aircraft, Aernnova in Cleansky 2

Autores: Miguel Ángel Castillo
Publicado en: 2019
Editor: Smart Energy Congress 2019
DOI: 10.5281/zenodo.3907841

Wing deformation measurements for manoeuvres of high load at the Airbus A320 DLR-ATRA by means of Image Pattern Correlation Technique

Autores: Tania Kirmse, Ralf Meyer, Fritz Boden
Publicado en: 2021, Página(s) 179-184
Editor: ETTC 2021 European Test and Telemetry Conference

MFACTURING OF THERMOPLASTIC FUSELAGE SKINS BY USE OF XENON FLASHLAMP ASSISTED AUTOMATED FIBER PLACEMENT

Autores: Kolbe Andreas
Publicado en: Edición 2, 2021
Editor: Aernnova Aerospace & University Carlos III of Madrid (UC3M)
DOI: 10.5281/zenodo.4954322

Comparison of Direct Operating Cost and Life Cycle Cost-Benefit Methods in Aircraft Technology Assessment

Autores: Ahmad A. Pohya, Kai Wicke, Johannes Hartmann
Publicado en: 2018 AIAA Aerospace Sciences Meeting, 2018, ISBN 978-1-62410-524-1
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-0282

"""SLM processing of optimized Active Flow Control Actuators for UHBR engine aircrafts""(AEC2020 Conference)"

Autores: Ane Miren Mancisidor Telleria
Publicado en: 2020
Editor: AEC2020 Conference
DOI: 10.5281/zenodo.4288455

INFODAY 11ª CONVOCATORIA DE PROPUESTAS CLEAN SKY 2 JU

Autores: Cristina Sánchez
Publicado en: 2020
Editor: Agencia IDEA & CDTI

Common Numerical Methods & Common Experimental Means for the Demonstrators of the Large Passenger Aircraft Platforms (AEC 2020)

Autores: Wolf R. Krüger, Fritz Boden, Tania Kirmse, Jonathan Lemarechal, Andreas Schröder, Hans Peter Barth, Sebastian Oertwig, Henri Siller, Jan Delfs, Antoine Moreau, Dominik Schäfer, Arne Stürmer, Marco Norambuena
Publicado en: 2020
Editor: Aerospace Europe Conference 2020

Bird strike By Artificial and Real Birds on Aircraft Leading Edges

Autores: Ritt, Stefan Andreas and Sirtautas, Justas
Publicado en: 2023
Editor: DAVVL - Verband für biologische Flugsicherheit

Large carbon fibre reinforced thermoplastic fuselage manufacturing supported by virtual processing

Autores: W.M. van den Brink; J. Kos; W.J. Vankan; A.J. de Wit
Publicado en: 7th Aircraft Structural Design Conference, Limerick, 2020, ISSN 2052-451X
Editor: RAeS

Fiber Laser Based Single Pulse Drilling for Production of Perforated Ti-tanium Sheets for HLFC Structures

Autores: Ocana, Roberto; Soriano, Carlos; Esmoris, Jose I.; Sanchez, Rafael
Publicado en: Journal of Laser Micro/Nanoengineering, 2019, ISSN 1880-0688
Editor: Japan Laser Processing
DOI: 10.2961/jlmn.2019.01.0010

Nuevo proceso de fabricación avanzada para secciones traseras de fuselaje de estructuras aeroespaciales altamente integradas

Autores: G. Nuñez-Márquez, P. Tabarés-Fernández, M. Mora-Mendías.
Publicado en: Revista de la asociación española de materiales compuestos, Edición Vol. 6 Núm. 2 (2022): Monográfico: Proyectos Europeos. Parte II, 2022, Página(s) p. 26-31, ISSN 2531-0739
Editor: AEMAC

Propagation of Acoustic Waves in Ducts with Flow Using the Multimodal Formulation

Autores: Gwénaël Gabard; Majd Daroukh; Bruno Mangin
Publicado en: AIAA Journal, Edición Volume 61, Number 6 May 2023, 2023, ISSN 1533-385X
Editor: AIAA
DOI: 10.2514/1.j062659

Numerical Assessment of Turbulence-Cascade Noise Reduction and Aerodynamic Penalties from Serrations

Autores: M. Buszyk and al.
Publicado en: AIAA Journal Volume 60, Number 6June 2022, 2022, ISSN 1533-385X
Editor: AIAA
DOI: 10.2514/1.j061301

On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action

Autores: R. Wartbichler, C. Ghibaudo, M. Galati, S. Biamino, D. Ugues, H. Clemens, S. Mayer
Publicado en: Advanced Engineering Materials, Edición 15272648, 2021, ISSN 1527-2648
Editor: Wiley-VCH GmbH
DOI: 10.1002/adem.202101199

Parallel hybrid electric propulsion architecture for single aisle aircraft - powertrain investigation

Autores: Jos Vankan, Wim Lammen
Publicado en: MATEC Web of Conferences, Edición 304, 2019, Página(s) 03008, ISSN 2261-236X
Editor: Europaen Aeronautics Science Network
DOI: 10.1051/matecconf/201930403008

Technologien für eine nachhaltige Luftfahrt – Der Small-Scale-Demonstrator im Projekt HLFC-WIN

Autores: Sven Ropte, Bram van de Kamp
Publicado en: Innovationsbericht 2021 des Instituts für Faserverbundleichtbau und Adaptronik, 2021, Página(s) 46-47, ISSN 2567-7713
Editor: Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR)

Bitte nicht stören - Laminarhaltung der Grenzschicht an Trennstellen

Autores: Schollerer, Martin
Publicado en: Innovationsbericht 2021, 2021, Página(s) 40-41, ISSN 2567-7713
Editor: Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR)

Full process chain simulation of the (wire-based) laser metal deposition process towareds fatigue life prediction

Autores: Tim Koenis, Wouter van den Brink, Marko Bosman
Publicado en: Procedia Structural Integrity 34, 2021, Página(s) 235–246, ISSN 2452-3216
Editor: Elsevier
DOI: 10.1016/j.prostr.2021.12.034

An application of the multiple-scales theory to acoustic double transition in ducts with flow

Autores: B. Mangin et al.
Publicado en: Journal of Sound and Vibration Volume 539, 24 October 2022, 117252, 2022, ISSN 0022-460X
Editor: Academic Press
DOI: 10.1016/j.jsv.2022.117252

Some specific challenges of HLFC design on a long-range wing

Autores: Geza Schrauf and Thomas Kilian
Publicado en: New Results in Numerical and Experimental Fluid Mechanics XIV, 23nd STAB/DGLR Symposium 2022, 2023, ISSN 1612-2909
Editor: Springer Science + Business Media

Verbesserung durch Vereinfachung – Mit optimierter Struktur zum erfolgreichen Vogelschlagtest

Autores: Andreas Schröder
Publicado en: Innovationsbericht 2021 des Instituts für Faserverbundleichtbau und Adaptronik, 2021, Página(s) 54-55, ISSN 2567-7713
Editor: Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR)

Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF)

Autores: Bassini E., Sivo A., Martelli P. A., Rajczak E. , Marchese G. Calignano F, Biamino S, Ugues D.
Publicado en: Journal of Alloys and Compounds Volume 905, 5 June 2022, 164213, 2022, ISSN 0925-8388
Editor: Elsevier BV
DOI: 10.1016/j.jallcom.2022.164213

Dynamic-stall measurements using time-resolved pressure-sensitive paint on double-swept rotor blades

Autores: Armin Weiss; Reinhard Geisler; Martin M. Müller; Christian Klein; Ulrich Henne; Johannes N. Braukmann; Johannes Letzgus
Publicado en: Experiments in Fluids, Edición 63:15, 2021, ISSN 0723-4864
Editor: Springer Verlag
DOI: 10.1007/s00348-021-03366-6

Design and manufacturing of a reinforced fuselage structure by automatic laying-up and in-situ consolidation with co-consolidation of skin and stringers using thermoplastic composite materials

Autores: Maria-Isabel Martin
Publicado en: Heliyon, Edición VOLUME 9, ISSUE 1, E12728, JANUARY 2023, 2022, ISSN 2405-8440
Editor: Elsevier Ltd
DOI: 10.1016/j.heliyon.2022.e12728

Laser micro drilling methods for perforation of aircraft suction surfaces

Autores: Andreas Stephen, Roberto Ocana, Joseba Esmoris, Claus Thomy, Carlos Soriano, Frank Vollertsen, Rafael Sanchez
Publicado en: Procedia CIRP, Edición 74, 2018, Página(s) 403-406, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2018.08.157

Miniaturization and Model-Integration of the Optical Measurement System for Temperature-Sensitive Paint Investigations

Autores: Jonathan Lemarechal; Benjamin Daniel Dimond; Hans Peter Barth; Michael Hilfer; Christian Klein
Publicado en: Sensors; Volume 23; Edición 16; Pages: 7075, 2023, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s23167075

CF/LM-PAEK: Characterisation and sensitivity to critical process parameters for automated fibre placement

Autores: Raps, Lukas; Chadwick, Ashley; Schiel, Ines; Schmidt, Isabelle
Publicado en: Composite Structures, Edición Volume 284, 2022, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2021.115087

Aeroacoustics Assessment of an Hybrid Aircraft Configuration with Rear-Mounted Boundary Layer Ingested Engine

Autores: Francesco Petrosino; Mattia Barbarino; Martin Staggat
Publicado en: Volume 11, Edición 2, 2021, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app11072936

Strength prediction of adhesively bonded single lap joints with the eXtended Finite Element Method

Autores: O. Völkerink, J. Kosmann, M. J. Schollerer, D. Holzhüter, C. Hühne
Publicado en: The Journal of Adhesion, Edición 95/5-7, 2019, Página(s) 474-494, ISSN 0021-8464
Editor: Taylor & Francis
DOI: 10.1080/00218464.2018.1553120

Simulation of an Aeronautical Product Assembly Process Driven by a Metrology Aided Virtual Approach

Autores: GORKA KORTABERRIA, UNAI MUTILBA, JON EGUSKIZA, JOEL MARTINS
Publicado en: """New Trends and Advances in Manufacturing Metrology"" Metrology 2022, 2(4), 427-445", 2022, ISSN 2673-8244
Editor: MDPI
DOI: 10.3390/metrology2040026

Design analysis for thermoforming of thermoplastic composites: prediction and machine learning-based optimization

Autores: Davide Nardi Jos Sinke
Publicado en: Composites Part C: Open Access, Edición Volume 5, 2021, ISSN 2666-6820
Editor: Elsevier B.V.
DOI: 10.1016/j.jcomc.2021.100126

A pragmatic approach for a 3D material model considering elasto-plastic behaviour, damage initiation by Puck or Cuntze and progressive failure of fibre-reinforced plastics

Autores: O. Völkerink, E. Petersen, J. Koord, C. Hühne
Publicado en: Computers & Structures, Edición 236, 2020, Página(s) 106280, ISSN 0045-7949
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compstruc.2020.106280

Development of a medium/long‑haul reference aircraft

Autores: Fröhler, Benjamin and Häßy, Jannik and Abu-Zurayk, Mohammad
Publicado en: CEAS Aeronautical Journal, Edición Volume 14, issue 3, July 2023, 2023, Página(s) Pages: 693 - 713, ISSN 1869-5582
Editor: Springer Science + Business Media
DOI: 10.1007/s13272-023-00662-1

Compensation of Modeling Errors for the Aeroacoustic Inverse Problem with Tools from Deep Learning

Autores: Hans-Georg Raumer, Daniel Ernst, Carsten Spehr
Publicado en: Acoustics 2022, 4(4), 834-848, 2022, ISSN 2624-599X
Editor: MPDI.com
DOI: 10.3390/acoustics4040050

Performance analysis of an electrically assisted propulsion system for a short-range civil aircraft

Autores: A W X Ang, A Gangoli Rao, T Kanakis, W Lammen
Publicado en: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Edición 233/4, 2019, Página(s) 1490-1502, ISSN 0954-4100
Editor: Mechanical Engineering Publications Ltd.
DOI: 10.1177/0954410017754146

Aerodynamic Performance Benefits of Over-the-Wing Distributed Propulsion for Hybrid-Electric Transport Aircraft

Autores: Reynard de Vries & Roelof Vos
Publicado en: Journal of Aircraft, 2023, ISSN 1533-3868
Editor: AIAA
DOI: 10.2514/1.c036909

Sub-scale flight test model design: Developments, challenges and opportunities

Autores: A.Raju Kulkarni, G. La Rocca, L.L.M.Veldhuis, G.Eitelberg
Publicado en: Progress in Aerospace Sciences, Edición 130, 2021, ISSN 0376-0421
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.paerosci.2021.100798

Boundary layer instability over a rotating slender cone under non-axial inflow

Autores: Sumit Tambe, Ferry Schrijer, Arvind Gangoli Rao and Leo Veldhuis
Publicado en: Journal of Fluid Mechanics, Edición Volume 910, 2021, Article number A25, 2021, ISSN 0022-1120
Editor: Cambridge University Press
DOI: 10.1017/jfm.2020.990

Recent developments of common numerical methods and common experimental means within the framework of the large passenger aircraft program

Autores: Boden, F. Barth, H. P. Hein, S. Heitmann, D. Kirmse, T. Klein, C. Krüger, W. Lemarechal, J. Norambuena, M. Schäfer, D. Schnell, R. Sinha, K. Theiß, A. Weiss, A.
Publicado en: CEAS Aeronaut J 14, 281–293 (2023), 2023, Página(s) 281–293, ISSN 1869-5590
Editor: CEAS
DOI: 10.1007/s13272-022-00635-w

ON IMPROVING PROCESS EFFICIENCY AND WELD QUALITY IN ULTRASONIC WELDING OF MISALIGNED THERMOPLASTIC COMPOSITE ADHERENDS

Autores: Camila Brito, Julie Teuwen, Irene Fernandez Villegas
Publicado en: Composite Structures Volume 304, Part 2, 15 January 2023, 116342, 2023, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2022.116342

The effects of misaligned adherends on static ultrasonic welding of thermoplastic composites

Autores: C.B.G. Brito. J. Teuwen, C. Dransfeld, I.F. Villegas
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición Volume 155, April 2022, 2022, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2022.106810

Discharge characteristics of drilled throttle orifices in fiber-reinforced plastics for an HLFC system

Autores: T. Kilian, T. Forßbohm, A. Seitz, B. Flache
Publicado en: CEAS Aeronautical Journal, Edición 11/2, 2020, Página(s) 431-439, ISSN 1869-5582
Editor: Springer Science + Business Media
DOI: 10.1007/s13272-019-00416-y

Deconvolution of Wave-Number-Frequency Spectra of Wall Pressure Fluctuations

Autores: Simon L. Prigent, Édouard Salze, Christophe Bailly
Publicado en: AIAA Journal, Edición 58/1, 2020, Página(s) 164-173, ISSN 0001-1452
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/1.j058203

Reynolds number and wind tunnel wall effects on the flow field around a generic UHBR engine high-lift configuration

Autores: Junaid Ullah, Aleš Prachař, Miroslav Šmíd, Avraham Seifert, Vitaly Soudakov, Thorsten Lutz, Ewald Krämer
Publicado en: CEAS Aeronautical Journal, Edición 11/4, 2020, Página(s) 1009-1023, ISSN 1869-5582
Editor: Springer Science + Business Media
DOI: 10.1007/s13272-020-00463-w

Numerical Analysis of Thermoplastically Welded CFRPStructures

Autores: Dr. Janko Kreikemeier, M.Sc. Agit Abdulkadir
Publicado en: Applied Composite Materials (2022), 2022, ISSN 1573-4897
Editor: Applied Composite Materials
DOI: 10.1007/s10443-022-10076-7

Characterization and analysis of the interlaminar behavior of thermoplastic composites considering fiber bridging and R-curve effects

Autores: B.H.A.H. Tijs, S. Abdel-Monsef, J. Renart, A. Turon and C. Bisagni
Publicado en: Composites Part A: Applied Science and Manufacturing Volume 162 November 2022, 2022, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2022.107101

Introducing variance-based global sensitivity analysis for uncertainty enabled operational and economic aircraft technology assessment

Autores: Pohya, Ahmad Ali; Wicke, Kai; Kilian, Thomas
Publicado en: Aerospace Science and Technology, Edición Volume 122, 2022, ISSN 1270-9638
Editor: Elsevier BV
DOI: 10.1016/j.ast.2022.107441

Experimental and numerical evaluation of conduction welded thermoplastic composite joints

Autores: B.H.A.H. Tijs, M.H.J. Doldersum, A. Turon, J.E.A. Waleson, C. Bisagni
Publicado en: Composite Structures, Edición Volume 281, 2022, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2021.114964

Design, analysis and testing of thermoplastic welded stiffened panels to investigate skin-stringer separation in post-buckling

Autores: Kevin van Dooren, Chiara Bisagni
Publicado en: Composites Part B: Engineering, Edición Volume 267, December 2023, 111033, 2023, ISSN 1359-8368
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2023.111033

Surface toughening – An industrial approach to increase the robustness of pure adhesive joints with film adhesives

Autores: MJ Schollerer, J Kosmann, D Holzhüter, C Bello-Larroche, C Hühne
Publicado en: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Edición 234/13, 2020, Página(s) 1980-1987, ISSN 0954-4100
Editor: Mechanical Engineering Publications Ltd.
DOI: 10.1177/0954410020950071

Engineering Method to Estimate the Blade Loading of Propellers in Nonuniform Flow

Autores: Nando van Arnhem, Reynard de Vries, Tomas Sinnige, Roelof Vos, Georg Eitelberg, Leo L. M. Veldhuis
Publicado en: AIAA Journal, Edición 58/12, 2020, Página(s) 5332-5346, ISSN 0001-1452
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/1.j059485

Quality Prediction of Continuous Ultrasonic Welded Seams of High-Performance Thermoplastic Composites by means of Artificial Intelligence

Autores: D. Görick; Lars-Christian Larsen; M. Engelschall; Alfons Schuster
Publicado en: Procedia Manufacturing (FAIM 2021), Edición Volume 55, 2021, Página(s) 116-123, ISSN 2351-9789
Editor: Elsevier B.V.
DOI: 10.1016/j.promfg.2021.10.017

Acoustic Feedback and Its Impact on Fan Flutter in Short Aeroengine Intakes

Autores: Schnell, Rainer; Frey, Christian
Publicado en: Journal of Propulsion and Power, Edición Journal of Propulsion and Power 2022 38:4, pp. 631–646, 2022, ISSN 1533-3876
Editor: AIAA
DOI: 10.2514/1.b38567

Influence of Fluid Viscosity and Compressibility on Nonlinearities in Generalized Aerodynamic Forces for T-tail Flutter

Autores: Dominik Schäfer
Publicado en: Aeroelasticity, Volume III (A special issue of Aerospace), 2022, ISSN 2226-4310
Editor: MDPI com
DOI: 10.3390/aerospace9050256

Aerodynamic Interaction Between Propellers of a Distributed- Propulsion System in Forward Flight

Autores: Reynard de Vries, Nando van Arnhem, Tomas Sinnige, Roelof Vos, and Leo L. M. Veldhuis
Publicado en: Aerospace Science and Technology, Edición Volume 118, November 2021, 107009, 2021, ISSN 1270-9638
Editor: Elsevier BV
DOI: 10.1016/j.ast.2021.107009

An investigation of in-situ AFP process parameters using CF/LM-PAEK

Autores: Ines Schiel, Lukas Raps, Ashley R. Chadwick, Isabelle Schmidt, Manuel Simone, Sebastian Nowotny
Publicado en: Advanced Manufacturing: Polymer & Composites Science, Edición 6/4, 2020, Página(s) 191-197, ISSN 2055-0340
Editor: Taylor & Francis Group
DOI: 10.1080/20550340.2020.1826772

Cloud Encounter Impact on Operational and Economical Effectiveness of Hybrid-Laminar-Flow-Control Aircraft

Autores: Ahmad Ali Pohya, Kai Wicke, Kristof Risse, Florian Linke, Alexander Lau, Benjamin Lührs, Majed Swaid
Publicado en: Journal of Aircraft, Edición 56/4, 2019, Página(s) 1513-1523, ISSN 1533-3868
Editor: American Institute of Aeronautics and Astronautics, Inc.
DOI: 10.2514/1.c035205

Assessment of Reynolds-Averaged Navier–Stokes/Blade Element Theory Body Force Method for Propeller Modeling

Autores: H. Pantel, F. Falissard, G. Dufour
Publicado en: AIAA Journal, Edición Volume 62, Number 2, 2024, ISSN 1533-385X
Editor: AIAA (American Institute of Aeronautics and Astronautics)
DOI: 10.2514/1.j063302

Morphed Vertical Tailplane Assessment for CertificationRequirements

Autores: Miguel A. Castillo-Acero, Cristina Cuerno-Rejado and Miguel A. Gómez-Tierno
Publicado en: Journal of Aerospace Science and Technology Volume 2, Number 1, January 2016, 2017, ISSN 2332-8258
Editor: David Publishing Company
DOI: 10.17265/2332-8258/2016.01.005

Validation of a Simulation Tool for an Environmentally Friendly Aircraft Cargo Fire Protection System

Autores: Arnav Pathak, Victor Norrefeldt, Marie Pschirer
Publicado en: Aerospace, Edición 8/2, 2021, Página(s) 35, ISSN 2226-4310
Editor: 10th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens
DOI: 10.3390/aerospace8020035

Skin-stringer separation in post-buckling of butt-joint stiffened thermoplastic composite panels

Autores: K.S.van Dooren B.H.A.H.Tijs J.E.A.Waleson C.Bisagni
Publicado en: Composite Structures Volume 304, Part 2, 15 January 2023, 116294, 2023, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2022.116294

The importance of accounting for large deformation in continuum damage models in predicting matrix failure of composites

Autores: B. Tijs C. Davila A. Turon C. Bisagni
Publicado en: Composites Part A: Applied Science and Manufacturing Volume 164, January 2023, 107263, 2023, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2022.107263

Preliminary Design and System Considerations for an Active Hybrid Laminar Flow Control System

Autores: Kalarikovilagam Srinivasan, Bertram
Publicado en: Aerospace, Edición 6/10, 2019, Página(s) 109, ISSN 2226-4310
Editor: Aeronautical Systems for Flow Control
DOI: 10.3390/aerospace6100109

Road to Acquisition: Preparing a MEMS Microphone Array for Measurement of Fuselage Surface Pressure Fluctuations.

Autores: Thomas Ahlefeldt; Stefan Haxter; Carsten Spehr; Daniel Ernst; Tobias Kleindienst
Publicado en: Micromachines, Vol 12, Iss 961, p 961 (2021), 2021, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi12080961

Allowables evaluation for the design of a thermoplastic fuselage

Autores: K. Muñoz, M. Jiménez, M. J. Mesa, R. Cabrera, S. Anaya, R. Elices, K. Fernández, M. I. Martín, J. Cuenca
Publicado en: Volume 07 - COMUNICACIONES MATCOMP21 (2022), Edición Núm. 4 - Aplicaciones Industriales - Caracterización, 2022, 2022, ISSN 2531-0739
Editor: Association of Composite Materials (AEMAC)
DOI: 10.23967/r.matcomp.2022.10.004

ONE OF THE WORLD'S LARGEST THERMOPLASTIC AEROSTRUCTURES SUCCESSFULLY COMPLETED IN STUNNING PROJECT

Autores: Marianne Mulder, Kees de Waal, Nadia Haifi, Ineke Boneschansker
Publicado en: 2023
Editor: GKN Aerospace - Fokker Aerostructures BV

HLFC-WIN - Innovative laminar wing concept for the low-emission aircraft of the future

Autores: Thomas Kilian
Publicado en: 2020
Editor: DLR

Cargo Door Demo day

Autores: Jakob Ring
Publicado en: 2021
Editor: SAAB

Effizient unterwegs – Langstreckenflugzeuge mit laminarer Umströmung

Autores: Andreas Schröder, Markus Kleineberg, Thomas Haase
Publicado en: 2020
Editor: DLR

Round table about usage of LIFI in aircraft

Autores: Philippe PRILLEUX
Publicado en: 2019
Editor: Tom Travel (Digital Tourism Media)

Thermoplastic composites welding advances for more sustainable airframes

Autores: Ginger Gardiner
Publicado en: 2022
Editor: CompositesWorld

Thermoplastic composites for primary aircraft structures

Autores: Bas Tijs, Bas Veldman, Arnt Offringa
Publicado en: 2019
Editor: New trends in composite materials workshop

DEWTECOMP PROJECT

Autores: Alessandro MARSEGLIA (CETMA)
Publicado en: 2021
Editor: AERNNOVA, CETMA

Presentation of technology or prototype (cockpit Utility Management system)

Autores: Gilles Saint-Aubin, Mathieu Fromage
Publicado en: 2023
Editor: ZAET
DOI: 10.5281/zenodo.10211233

E-Fan X hybrid project edges towards system integration

Autores: Cirium
Publicado en: 2020
Editor: FlightGlobal

Multi-flange RTM frames enable radical rear fuselage design

Autores: Ginger Gardiner
Publicado en: 2022
Editor: Composites World Magazine

The DRAGON Concept

Autores: C. Döll
Publicado en: 2020
Editor: CS2JU

NLR’s STUNNING project departs for next generation composite planes

Autores: anon.
Publicado en: 2021
Editor: NLR

SONACA active on making future transportation cleaner

Autores: Nicolas Dellisse
Publicado en: 2019
Editor: Sonaca

Dassault Aviation in flight with Clean Sky

Autores: Dassault Communication
Publicado en: 2018
Editor: Dassault
DOI: 10.5281/zenodo.4108388

ATN/IPS Airborne Router Demonstrator 2020 - Airbus & Honeywell

Autores: Enrique Mené López Michal Skořepa
Publicado en: 2021
Editor: Zenodo
DOI: 10.5281/zenodo.4438803

Cleansky 2 UBBICK Project

Autores: MAZO, Roberto; GUARINO, Olivia; ROBLIN, Nicolas
Publicado en: 2020
Editor: Aerospace Conference 2020
DOI: 10.5281/zenodo.4120807

The SFD, a new Scaled Research Aircraft

Autores: Leo Timmermans
Publicado en: 2022
Editor: NLR

ADVANCE Integrated final demonstration

Autores: Rainer Ludwigs
Publicado en: 2020
Editor: Bockfilm
DOI: 10.5281/zenodo.4010184

CANOBLE: New cockpits for reducing cabin noise

Autores: LPA
Publicado en: 2019
Editor: CSJU

Good vibrations: Quieter skies ahead with Clean Sky

Autores: Y. Revalor
Publicado en: 2021
Editor: Clean Sky Joint Undertaking
DOI: 10.5281/zenodo.7322836

Hot topic: Clean Sky's 'Environmentally friendly fire protection' system

Autores: Rainer Beuermann, Victor Norrefeldt
Publicado en: 2019
Editor: Clean Sky

Local Surface Toughening – Ein kleiner Streifen für die Klebung, ein großer Effekt für die Verbindungsfestigkeit!

Autores: Martin Schollerer
Publicado en: 2021
Editor: Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)

Moving forward on the Multifunctional Fuselage Demonstrator (MFFD)

Autores: Hannah Mason
Publicado en: 2020
Editor: CompositesWorld

Realisierung des Suction Rib-Funktionsdemonstrators

Autores: Bram van de Kamp
Publicado en: 2022
Editor: German Aerospace Center - Institute of Composite Structures and Adaptive Systems

Mission Flight Tests of Clean Aviation’s Scaled Flight Demonstrator

Autores: P.Iannelli, L. Timmermans, P. Schmollgruber et al.
Publicado en: 2022
Editor: CIRA

Digitalisiertes Tränkungszentrum fertigt erfolgreich “Suction Rib”

Autores: Bram van de Kamp, Mark Opitz, Markus Kleineberg
Publicado en: 2020
Editor: DLR

Power Sharing: Non-Propulsive Energy project investigates future aircraft architectures electric flight

Autores: CS2 JU journalist
Publicado en: 2020
Editor: CSJU

Virtual Tour through the FTF - Extended by the cargo bay

Autores: Victor Norrefeldt, Tanja Fleck
Publicado en: 2020
Editor: Fraunhofer

STUNNING | World’s largest known thermoplastic aircraft structure

Autores: NLRmedia
Publicado en: 2021
Editor: NLRmedia

SFD Scaled Flight Demonstrator Maiden flight 30 March 2022

Autores: NLRmedia
Publicado en: 2022
Editor: NLR

EU Clean Sky 2 Projekt HLFC: Funktionsdemonstration einer Laminarflügel-Komponente (Suction Rib)

Autores: Kleineberg, Markus
Publicado en: LightCon 2023, Edición 13th June 2023, 2023
Editor: Deutsche Messe (DLR, Institut für Systemleichtbau)

Developing a 4.0 solution for aeronautical manufacturing and assemblage processes based on state-of-the-art materialsDeveloping a 4.0 solution for aeronautical manufacturing and assemblage processes based on state-of-the-art materials

Autores: Eider Lezkano - Tekniker
Publicado en: 2020
Editor: Tekniker

HLFC-WIN Website

Autores: Projekt Team
Publicado en: 2019
Editor: HLFC-WIN

Presentation of technology or prototype (Crew oxygen protection)

Autores: Matthieu Fromage, Gilles Saint-Aubin
Publicado en: 2023
Editor: ZAET
DOI: 10.5281/zenodo.10211316

Clean Sky 2. Active Cockpit Ground Demonstrator

Autores: Aurbus DS, GUCV - Visual Content Dpt
Publicado en: 2020
Editor: CASA
DOI: 10.5281/zenodo.4139519

Techno Developments in CS2 (MATCOMP 2019)

Autores: M. A. Castillo
Publicado en: 2019
Editor: MATCOMP 2019
DOI: 10.5281/zenodo.3908193

Clean Aviation’s Scaled Flight Demonstrator completes its Mission Flight Tests

Autores: P. Iannelli, P. Schmollgruber, L. Timmermans et al.
Publicado en: 2022
Editor: CIRA

Bau und Vermessung einer laminaren Trennstelle von Flügelvorderkanten

Autores: Marco Krause, Martin Schollerer
Publicado en: 2021
Editor: German Aerospace Center (DLR)

fidamc_in-the-frame-of-cs2-large-passenger-aircraft-activity

Autores: K. Fernández, M. I. Martín, J. Cuenca
Publicado en: 2022
Editor: Linkedin

Easy Come, Easy Go: Clean Sky's NextGen Cabin streamlines assembly and reconfiguration

Autores: Lothar Kerschgens, Jimmy Tchen
Publicado en: 2020
Editor: CSJU

Integrated modular Avionics - IMA by GMV

Autores: José Neves
Publicado en: 2018
Editor: Farnborough International Air Show 2018
DOI: 10.5281/zenodo.6629085

Numerische Strukturuntersuchung einer laminaren Trennstelle Teil 1 – Modellerstellung

Autores: Marius Mantei, Martin Schollerer
Publicado en: 2021
Editor: German Aerospace Center (DLR)

ILA Goes digital« - Virtual Tour of Fraunhofer IBP Aviation Research Facilities

Autores: Victor Norrefeldt, Florian Mayer
Publicado en: 2020
Editor: ILA

What is a ‘hybrid-electric’ aircraft?

Autores: Riona Armesmith
Publicado en: 2019
Editor: The Telegraph 'STEM Awards 2020'

SMEs DRIVING INNOVATION FOR CLEAN AVIATION

Autores: Florent Liffran
Publicado en: 2020
Editor: CSJU

FRAMES : A new research project focused on thermoplastic manufacturing solutions for complex geometries.

Autores: Guillaume Fourage, Andreas Kolbe
Publicado en: 2020
Editor: ESTIA-Compositadour

Virtual manufacturing process for one shot composite structures

Autores: Federico Martin De La Escalera
Publicado en: 2021
Editor: University Carlos III of Madrid, Clean Sky 2, AERNNOVA

El centro tecnológico Aitiip se afianza en el sector aeronáutico

Autores: Luis H. Menéndez
Publicado en: 2020
Editor: Heraldo.es

INNOTOOL: Development of innovative smart 4.0 tooling set for the manufacturing and assembly of the Advanced Rear End product

Autores: Carlos Bello Larroche (AERNNOVA) / Alejandro Marqués Paola (AITIIP) / Gorka Kortaberria (TEKNIKER)
Publicado en: 2021
Editor: Metromeet

Heron - AITIIP is developing innovative RTM tooling, ALM system for sustainable aircraft wing

Autores: Chris Pasion
Publicado en: 2021
Editor: www.compositesworld.com

Manufacturing the upper half of the Multifunctional Fuselage Demonstrator (MFFD)

Autores: Ginger Gardiner
Publicado en: 2021
Editor: CompositesWorld

Desarrollo de una solución 4.0 para procesos de fabricación y montaje aeronáuticos basados en materiales de última generación

Autores: TEKNIKER
Publicado en: 2020
Editor: TEKNIKER

At the sharp end: The D3 Novel Business Jet Cockpit Technologies

Autores: FAVIER Mathieu
Publicado en: 2021
Editor: Clean Sky 2 JU
DOI: 10.5281/zenodo.5821291

Verbesserung durch Vereinfachung – Mit optimierter Struktur zum erfolgreichen Vogelschlagtest

Autores: Andreas Schröder
Publicado en: 2022
Editor: German Aerospace Center

CLEAN SKY 2 TECHNOLOGY PROGRESS – CONTRIBUTION TO THE ENVIRONMENTAL PERFORMANCE OF THE NEXT GENERATION OF AIRCRAFT

Autores: Dr Federico Martín de la Escalera Cutillas (Aernnova/Aerospace department at UC3M) Dr Miguel Angel Castillo Acero (Aernnova) Dr Rauno Cavallaro (Aerospace department at UC3M) Dr Andrea Cini (Aerospace department at UC3M)
Publicado en: 2021
Editor: Carlos III University

European Conference on Multifunctional StructuresEMuS 202017-18 November 2020

Autores: Johan Kos, Xavier Martinez, and Harmen Schippers
Publicado en: 2021
Editor: International Centre for Numerical Methods in Engineering (CIMNE)

Influence of Surface Irregularities on the Expected Boundary-Layer Transition Location on Hybrid Laminar Flow Control Wings

Autores: Juan Alberto Franco Sumariva; Alexander Theiss; Stefan Hein
Publicado en: New Results in Numerical and Experimental Fluid Mechanics XIII, Edición 151, 2021, Página(s) 174-184, ISBN 978-3-030-79561-0
Editor: Springer, Cham
DOI: 10.1007/978-3-030-79561-0_17

Voice Control in a Real Flight Deck Environment

Autores: Michal Trzos, Martin Dostl, Petra Machkov, Jana Eitlerov
Publicado en: Text, Speech, and Dialogue - 21st International Conference, TSD 2018, Brno, Czech Republic, September 11-14, 2018, Proceedings, Edición 11107, 2018, Página(s) 388-402, ISBN 978-3-030-00793-5
Editor: Springer International Publishing
DOI: 10.1007/978-3-030-00794-2_42

Automated Assembly of Thermoplastic Fuselage Structures for Future Aircrafts

Autores: Simon Kothe, Benjamin Diehl
Publicado en: 2020, ISBN 978-3-662-62138-7
Editor: Springer
DOI: 10.1007/978-3-662-62138-7_47

The Effect of 2-D Surface Irregularities on Laminar-Turbulent Transition: A Comparison of Numerical Methodologies

Autores: Francesco Tocci; Juan Alberto Franco; Stefan Hein; Guillaume Chauvat; Ardeshir Hanifi
Publicado en: New Results in Numerical and Experimental Fluid Mechanics XIII, Edición 151, 2021, Página(s) 246-256, ISBN 978-3-030-79561-0
Editor: Springer, Cham
DOI: 10.1007/978-3-030-79561-0_24

DLR Feasibility Study of HLFC Wing Designs for S1MA Wind Tunnel Test

Autores: Thomas Streit; Heiko Geyr von Schweppenburg; David Cruz; Rafael Sanchez
Publicado en: New Results in Numerical and Experimental Fluid Mechanics XIII, Edición 151, 2021, Página(s) 235-245, ISBN 978-3-030-79561-0
Editor: Springer, Cham
DOI: 10.1007/978-3-030-79561-0_23

A Procedure to Estimate the Size of a Suction Flap for a Passive HLFC System

Autores: Geza Schrauf
Publicado en: New Results in Numerical and Experimental Fluid Mechanics XII, Edición 151, 2021, Página(s) 215-223, ISBN 978-3-030-79561-0
Editor: Springer, Cham
DOI: 10.1007/978-3-030-79561-0_21

Fabricación de rigidizadores mediante conformado en prensa de material compuesto de matriz termoplástica de altas prestaciones para integración en estructuras típicas de fuselaje

Autores: Sabela González Seijas (Author), Alberto Jiménez Suárez (Supervisior)
Publicado en: 2020
Editor: Universidad Rey Juan Carlos, FIDAMC

Hybrid-Electric Aircraft with Over-the-Wing Distributed Propulsion

Autores: Reynard de Vries
Publicado en: 2022, ISBN 978-94-6384-287-7
Editor: Delft University of Technology
DOI: 10.4233/uuid:ef87dc11-e7b2-4726-a41f-28588d64c58d

Unconventional Propeller−Airframe Integration for Transport Aircraft Configurations

Autores: Nando van Arnhem
Publicado en: 2022, ISBN 978-94-6384-304-1
Editor: Delft University of Technology
DOI: 10.4233/uuid:4d47b0db-1e6a-4f38-af95-aafd33c29402

Integration of Non-Probabilistic Uncertainty Quantification Methods for the Life-Cycle-Cost-Benefit Analysis of Hybrid Laminar Flow Control

Autores: Bernhardt, Niklas
Publicado en: 2022
Editor: DLR TUHH

Boundary-layer instability on rotating cones

Autores: Tambe, S.S.
Publicado en: 2022
Editor: Delft University of Technology
DOI: 10.4233/uuid:40ed5b16-bf5a-409e-a28e-74f115f984cf

Similitude augmentation in sub-scale flight test model design

Autores: Akshay Raju Kulkarni
Publicado en: 2022
Editor: Delft University of Technology
DOI: 10.4233/uuid:6f0eaa80-e52e-4a03-b92b-cae847f12906

Analysis of thermoplastic composites and conduction welded joints

Autores: B.H.A.H. Tijs (GKN Fokker-TUD) A. Turon (University of Girona) C. Bisagnic (TUD)
Publicado en: 2023, ISBN 978-94-6473-101-9
Editor: TU Delft
DOI: 10.4233/uuid:dd3bff55-b684-47cc-96f3-6ff109d345a0

Numerische Strukturuntersuchung einer laminaren Trennstelle Teil 2 – Berechnung und Auswertung

Autores: Marius Mantei, Martin Schollerer
Publicado en: 2021
Editor: German Aerospace Center (DLR)

Ermittlung und Validierung der Prozessgrößen beim elektrischen Widerstandsschweißen von faserverstärkten Hochleistungsthermoplasten und deren Einfluss auf die Verbindungsqualität

Autores: Thomè, Anton; Endraß, Manuel
Publicado en: 2021
Editor: DLR

Derechos de propiedad intelectual

AIR GASPER WITH INTEGRATED FAN

Número de solicitud/publicación: 20 20000267
Fecha: 2020-04-10
Solicitante(s): ZODIAC CABIN CONTROLS GMBH

OXYGEN GENERATOR OUTLET MANIFOLD WITH IMPROVED THERMIC PROPERTIES

Número de solicitud/publicación: 20 154175
Fecha: 2020-01-28
Solicitante(s): ZODIAC CABIN CONTROLS GMBH

CONNECTING DEVICE AND FASTENING SYSTEM FOR FIXING A CABIN FIXTURE DEVICE OF A CABIN OF AN AIRCRAFT TO A FASTENING RAIL

Número de solicitud/publicación: 20 151383
Fecha: 2020-01-13
Solicitante(s): AIRBUS OPERATIONS GMBH

Verfahren und Verbindung zum Fügen zweier Bauelemente

Número de solicitud/publicación: 10 2017103895
Fecha: 2017-02-24
Solicitante(s): DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV

Verfahren zum Einbau einer Innenausbaukomponente eines Flugzeugs, Innenausbaukomponente für ein Flugzeug und System zur Montage von Innenausbaukomponenten

Número de solicitud/publicación: 10 2018121623
Fecha: 2018-09-05
Solicitante(s): AIRBUS OPERATIONS GMBH

FIXING SYSTEM FOR FIXING INSTALLATION ELEMENTS IN A CABIN OF A VEHICLE

Número de solicitud/publicación: 19 168296
Fecha: 2019-04-10
Solicitante(s): AIRBUS OPERATIONS GMBH

Befestigungssystem zum Sichern von Bauteilen

Número de solicitud/publicación: 10 2018104360
Fecha: 2018-02-27
Solicitante(s): AIRBUS OPERATIONS GMBH

Verfahren zum Installieren von Systemkomponenten in einem Abschnitt eines Flugzeugrumpfs

Número de solicitud/publicación: 10 2018123531
Fecha: 2018-09-25
Solicitante(s): AIRBUS OPERATIONS GMBH

OXYGEN MASK ASSEMBLY WITH OPTIMIZED PACKAGE SIZE

Número de solicitud/publicación: 19 188417
Fecha: 2019-07-25
Solicitante(s): SAFRAN CABIN GERMANY GMBH

Installationssystem für eine Kabine eines Fahrzeugs

Número de solicitud/publicación: 10 2019109573
Fecha: 2019-04-11
Solicitante(s): AIRBUS OPERATIONS GMBH

Bauteil, dessen Verwendung und Verfahren zum Verbinden eines Bauteils

Número de solicitud/publicación: 10 2017127009
Fecha: 2017-11-16
Solicitante(s): DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV

Befestigungssystem zum Befestigen von Einbauten an einer Schiene in einem Fahrzeug

Número de solicitud/publicación: 10 2018103514
Fecha: 2018-02-16
Solicitante(s): AIRBUS OPERATIONS GMBH

TOLERANCE COMPENSATION SUBASSEMBLY, AIRCRAFT COMPONENT PROVIDED THEREWITH AND AIRCRAFT

Número de solicitud/publicación: 20 171124
Fecha: 2020-04-23
Solicitante(s): AIRBUS OPERATIONS GMBH

PASSENGER SERVICE UNIT WITH COVER

Número de solicitud/publicación: 20 158269
Fecha: 2020-02-19
Solicitante(s): ZODIAC CABIN CONTROLS GMBH

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Derechos de propiedad intelectual

Compartir esta página Compartir esta página en las redes sociales

Descargar Descargar el contenido de la página