Large Passenger Aircraft Innovative Aircraft Demonstrator Platform

Rezultaty

D0-89 LPA Dissemination and Exploitation Plan 2021

LPA Dissemination and Exploitation Plan 2021 as contractually due for the GAM

D0-84 LPA Dissemination and Exploitation Plan 2020

LPA Dissemination and Exploitation Plan 2020 as contractually due in the GAM

D1.1.12.10-27 SA2FIR Fan module - Instrumented module 1

SA2FIR Fan Module instrumented parts for OGV, splitter, IGV module

D1.1.12.10-21 SA2FIR ADAS - FAT results hardware

SA2FIR ADAS - FAT results hardware RSB, RDAS and MDAS

D1.6.3.3-34 Robustified design of the DEP-SFD

Robustify the DEP-SFD design

D1.6.3.4-14 Robustified DEP-SFD ready for taxi testing

Integration of robustified design in the DEP-SFD

D1.5.4.2-11 Synthesis on improvements on the aero-vibro-acoustic models channel v2

Synthesis on improvements on the aero-vibro-acoustic models channel v2

D1.1.12.10-26 SA2FIR Fan module - Machined parts module 3

SA2FIR Fan Module machined parts for rotor module (spinner, hub, adapter, fairings)

D1.1.10-102 GTD Tests Results Airbus feedback

GTD Tests Results Airbus feedback Budget of 35k€ (Gross)

D1.6.3.5-16 Ground testing the DEP-SFD

Ground testing the DEP-SFD after the incident to verify robustness for fire risks. The modifications are tested thoroughly on the ground in a simulation facility (‘iron bird’) and in taxi tests and will be integrated in the DEP-SFD.

D1.1.12.10-23 SA2FIR ADAS - Additional DAS hardware

SA2FIR ADAS - Additional DAS hardware (CPDT, DAS modules)

Publikacje

Analyse von Optionen zur Fertigungsoptimierung am HLFC Höhenleitwerk

Autorzy: Markus Kleineberg, Andreas Schröder, Alexander Bismark, Jörg Nickel
Opublikowane w: 2021
Wydawca: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)
DOI: 10.5281/zenodo.5995268

"""Numerical Study of Active Flow Separation Control for UHBR Engine Integration on Generic Wing in High-Lift Configuration""(AEC2020 Conference)"

Autorzy: A. Prachar, J. Ullah, T. Lutz, A. Ayele, S. Segal, M. Smid
Opublikowane w: 2020
Wydawca: AEC2020 Conference
DOI: 10.5281/zenodo.4288432

Impact investigation at ONERA

Autorzy: R. Ortiz; G. Portemont; R.De-Coninck; A.Peroche
Opublikowane w: 2021
Wydawca: DLR
DOI: 10.5281/zenodo.5872544

Use of the Flight Test Facility Mock-Ups in the European Clean Sky 2 program

Autorzy: Victor Norrefeldt, Florian Mayer, Arnav Pathak, Marie Pschirer, Max Kienberger, Andreas Lindner, Sabine Johann, Anna Nagele-Renzl, Michael Buschhaus, Gunnar Grün
Opublikowane w: 2022
Wydawca: ICAS

Design Concepts for Stabiliser Leading Edges with HLFC Technology and Bird Strike Resilience

Autorzy: Ritt, Stefan; Vinot, Mathieu
Opublikowane w: Numer 2, 2021
Wydawca: Deutscher Luft- und Raumfahrtkongress 2021 (DLRK)
DOI: 10.5281/zenodo.5994794

Multi-Modal Multi-Party Interaction in the Flight Dec

Autorzy: Martin Dostal
Opublikowane w: 2022
Wydawca: Towards Sustainable Aviation Summit 2022
DOI: 10.5281/zenodo.7713176

GPAHRS – Navigation Enabler for More Autonomous Aircraft (AEC 2020)

Autorzy: Zdenek Kana, Pavol Malinak, Tomas Vaispacher, Milos Sotak, Libor Slabak, Jan Zlebek, Guillaume Bourely, Alain Guillet, Fabien Garrido
Opublikowane w: 2020
Wydawca: AEC 2020
DOI: 10.5281/zenodo.44953

Reynolds Number and Wind Tunnel Wall Effects on the Flow Field arround a Generic UHBR Engine High-Lift Configuration

Autorzy: J. Ullah, A. Pracha, M. Schmid, A. Seifert, V. Soudakov, T. Lutz
Opublikowane w: 2019
Wydawca: 3AF International Conference
DOI: 10.5281/zenodo.4284874

ACOUSTIC ABSORPTION IN BUSINESS JETS CABIN

Autorzy: Y. Revalor
Opublikowane w: 2023
Wydawca: ISAE and ONERA
DOI: 10.5281/zenodo.10204281

Combined Hot Isostatic Pressing and Rapid Quenching as a post processing option for AM parts

Autorzy: D. Ugues, E. Bassini, G. Marchese, A. Sivo, P.A. Martelli
Opublikowane w: 2021
Wydawca: International Conference on processing & manufacturing of advanced materials - THERMEC 2021
DOI: 10.5281/zenodo.5749225

High-speed manufacturing of HLFC structures by laser micro drilling (LIM 2019)

Autorzy: Stephen, Andreas; Ocana, Roberto; Esmoris, Joseba; Wernera, Christian; Soriano, Carlos; Vollertsen, Frank; Sanchez, Rafael
Opublikowane w: 2019
Wydawca: Lasers in Manufacturing Conference 2019
DOI: 10.5281/zenodo.3908227

Applying automotive industry materials and manufacturing processes in the aerospace industry in order to reduce cost

Autorzy: Aliage Maraver, Luis; Egurrola, Dr. José Javier; Castillo Acero, Miguel Á.
Opublikowane w: 2022
Wydawca: CS2 Joint Undertaking
DOI: 10.5281/zenodo.4439579

Design and manufacturing of a Cargo Door Surround Structure (cDSS) using new technologies for thermoplastic based carbon fibre composites

Autorzy: Carlos Bello
Opublikowane w: CS2 technology progress – contribution to the environmental performance of the next generation of aircraft, 2021
Wydawca: University Carlos III of Madrid (UC3M) together with AERnnova Aerospace SA and CDTI
DOI: 10.5281/zenodo.6496833

ROBUST ASSEMBLY - QUALITY ASSURED WELDING TECHNOLOGIES FOR FULL-SCALE APPLICATIONS

Autorzy: Endraß, Manuel; Engelschall, Manuel; Mayer, Monika; Gänswürger, Philipp; Vistein, Michael; Schönheits, Manfred; Jarka, Stefan; Bauer, Simon; Fischer, Frederic; Schuster, Alfons; Larsen, Lars-Christian; Ferstl, Stefan; Kupke, Michael
Opublikowane w: SAMPE Europe Conference 2022 Hamburg - Germany, 2022
Wydawca: SAMPE - Society for the Advancement of Material and Process Engineering

AUTOMATED JOINING AND ASSEMBLY OF THERMOPLASTIC FUSELAGE STRUCTURES FOR THE AIRCRAFT FACTORY OF TOMORROW

Autorzy: Diehl, Benjamin; Kothe, Simon; Niermann, Dirk; Wolf, Michael; Chen, Lin
Opublikowane w: 2020
Wydawca: AEC2020
DOI: 10.5281/zenodo.6545033

Advancements and challenges of MEMS microphones in aeroacoustics: A comprehensive overview

Autorzy: Spehr, Carsten; Ahlefeldt, Thomas; Ernst, Daniel
Opublikowane w: 2023
Wydawca: DGLR

Overview of the DLR activities in Clean Sky 2 regarding novel configurations and hybrid electric aircraft

Autorzy: T. Hecken, M. Iwanizki, M. J. Arzberger, D. Silberhorn, M. Plohr
Opublikowane w: 2021
Wydawca: American Institute of Aeronautics and Astronautics SciTech2021

Design and Validation of a Pilot Stress Monitoring System based on a Deep Convolutional Neural Network Model

Autorzy: Jaime Meneses (Airbus DS) Oscar Miranda (Airbus DS) Ignacio Sanchez (Airbus DS) Cesar Alvarez (Airbus DS) Pablo Rodriguez (Airbus DS)
Opublikowane w: 2021 IEEE/AIAA 40th Digital Avionics Systems Conference (DASC), 2021, ISBN 978-1-6654-3420-1
Wydawca: IEEE
DOI: 10.1109/dasc52595.2021.9594363

European Conference on Multifunctional Structures EMuS 2020

Autorzy: Dr. Johan Kos, Prof. Xavier Martinez and Dr. Harmen Schippers
Opublikowane w: 2020, ISBN 978-84-121101-6-6
Wydawca: CIMNE

Propagation of acoustic waves in axially varying ducts with potential flow using the multimodal formulation

Autorzy: B. Mangin et al.
Opublikowane w: 2022
Wydawca: AIAA/CEAS
DOI: 10.2514/6.2022-3098

Performance of Forward-Swept and Backward-Swept Stabilizers in a V-tail Configuration

Autorzy: R.C.M. Cheung, D. Rezgui and J.E. Cooper R.B. Green R.C. Llamas Sandín
Opublikowane w: 2022
Wydawca: AIAA
DOI: 10.2514/6.2023-2458

Simulation of a Distributed Propulsion system in a Wind Tunnel

Autorzy: Dustin Bongen, Mário Firnhaber Beckers, Michael Schollenberger, Dominique P. Bergmann, Thorsten Lutz, Alex Gothow, Mahmod Saeed, Julien Weiss, Andreas Bardenhagen and Rolf Radespiel
Opublikowane w: 2022
Wydawca: AIAA
DOI: 10.2514/6.2022-3818

Light Weight Eye Visor for commercial pilot use: Human Factors assessment of novel functionalities

Autorzy: Cesar Alvarez Pablo Rodriguez
Opublikowane w: 2021 IEEE/AIAA 40th Digital Avionics Systems Conference (DASC), 2021, ISBN 978-1-6654-3420-1
Wydawca: IEEE
DOI: 10.1109/dasc52595.2021.9594307

Developments of DIC techniques for propeller blade deformation measurements and in-flight applications

Autorzy: Kirmse, Tania; Boden, Fritz
Opublikowane w: 2023
Wydawca: DGLR

Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM)

Autorzy: E. Bassini, A. Sivo, G. Marchese, P. Martelli, F. Calignano, S. Biamino, D. Ugues
Opublikowane w: 2021
Wydawca: Associazione Italiana di Metallurgia
DOI: 10.5281/zenodo.5749390

Influence of the Process Parameters on the Densification and Microstructure of Ni-based Superalloys with Different Amount of γ′ Former Alloying Elements Processed by SLM

Autorzy: G. Marchese, S. Parizia, A. Sivo, E. Bassini, F. Calignano, S. Biamino, D. Ugues
Opublikowane w: 2020
Wydawca: TMS 2020 Annual Meeting & Exhibition
DOI: 10.5281/zenodo.4153367

Evaluation of a next generation oxygen system – assessment of usability, comfort and human performance

Autorzy: Julia Maier, Frank Albers, Oubaid, Fromage, Duputy
Opublikowane w: 2022
Wydawca: Transportation Research Procedia
DOI: 10.1016/j.trpro.2022.12.011

Flight Testing of Low-Cost Inertial Navigation System with Dual Antenna GPS Heading Functionality in Polar Region

Autorzy: Radek Baranek, Radek Reznicek, Pavol Malinak, Radu Cioaca
Opublikowane w: 2022
Wydawca: ION GNSS+ 2022
DOI: 10.5281/zenodo.7347559

A comparison of different approaches to study the porosity and surface defects for Electron Beam Melting

Autorzy: C. Ghibaudo, G. Rizza, G. Marchese, M. Galati, L. Iuliano, D. Ugues, S. Biamino
Opublikowane w: 2021
Wydawca: European Powder Metallurgy Association
DOI: 10.5281/zenodo.5749375

Numerical modelling of aeronautical composite structure subjected to lightning strike phenomenon

Autorzy: Martín de la Escalera, Federico; Briones, Ignacio; Essa, Yasser
Opublikowane w: 2019
Wydawca: EASN
DOI: 10.5281/zenodo.3923773

Inline Quality Control for Thermoplastic Automated Fiber Placement by 3D Profilometry

Autorzy: Schuster, Alfons; Mayer, Monika; Brandt, Lars; Deden, Dominik; Krebs, Florian; Kupke, Michael
Opublikowane w: Numer 2, 2021
Wydawca: SAMPE Europe Conference 2021

Produktionskostenschätzung im Kontext von HLFC Win (DLRK2020)

Autorzy: Johanna-Lisa Pauly, Ahmad Ali Pohya, Kai Wicke
Opublikowane w: 2020
Wydawca: Deutscher Luft- und Raumfahrt Kongress (DLRK2020)
DOI: 10.5281/zenodo.4018953

Laminarity: a promising way to meet future environmental challenges

Autorzy: T. Delille
Opublikowane w: 2022
Wydawca: 3AF
DOI: 10.5281/zenodo.10203502

Effect of tolerances of surface irregularities on laminar-turbulent transition for HLFC wings

Autorzy: Juan Alberto Franco, Stefan Hein
Opublikowane w: 2022
Wydawca: Association Aéronautique et Astronautique de France

DASC Conference - Internet Protocol Suite for Safety Services Validation with Next Generation Avionics

Autorzy: Enrique Mene-Lopez (Airbus) Luc Emberger (Airbus) Michal Skorepa (Honeywell) Michael L. Olive (Honeywell)
Opublikowane w: 2021
Wydawca: 40th DASC Conference
DOI: 10.5281/zenodo.5643155

Failure of Thermoplastic Composite Welded Joints

Autorzy: Bas H.A.H. Tijs, Albert Turon and Chiara Bisagni
Opublikowane w: 2021
Wydawca: Scipedia
DOI: 10.23967/composites.2021.043

Monitoring micro-drilling of large Ti plates using single laser pulses for HLFC applications (LIM 2019)

Autorzy: Ocana, Roberto; Soriano, Carlos; Esmoris, Jose I.; Sanchez, Rafael
Opublikowane w: 2019
Wydawca: Lasers in Manufacturing Conference 2019
DOI: 10.5281/zenodo.3908198

Investigation and modelling of cargo hold fire suppressionagent concentration profiles for Halon replacement

Autorzy: Victor Norrefeldt, Arnav Pathak, Marie Pschirer, Max Kienberger
Opublikowane w: 2022
Wydawca: FAA

A320 ATRA Flugversuche mit einem HLFC System im Seitenleitwerk

Autorzy: Geza Schrauf, Heiko Freiherr Geyr von Schweppenburg
Opublikowane w: 2021
Wydawca: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)

Applying automotive industry materials and manufacturing processes in the aerospace industry in order to reduce cost

Autorzy: Luis Aliaga (AERNNOVA), Dr. José Javier Egurrola (LEARTIKER)
Opublikowane w: 2020
Wydawca: CS2 - Composite Material Manufacturing Virtual Workshop
DOI: 10.5281/zenodo.4439578

The influence of high spanwise chamber extent on HLFC performance

Autorzy: Kilian, Thomas; Bismark, Alexander Heinz; van de Kamp, Bram; Schröder, Andreas
Opublikowane w: Numer 2, 2021
Wydawca: Deutscher Luft- und Raumfahrtkongress 2021 (DLRK)
DOI: 10.5281/zenodo.5995052

Effect of Surface Irregularities on Boundary-Layer Transition on HLFC Wings studied by AHLNS

Autorzy: Juan Alberto Franco and Stefan Hein
Opublikowane w: 2021
Wydawca: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655990

New advanced manufacturing process for rear fuselage sections of highly integrated aerospace structures

Autorzy: G. Nuñez-Márquez, P. Tabarés-Fernández, M. Mora-Mendías.
Opublikowane w: 2022
Wydawca: AEMAC
DOI: 10.5281/zenodo.7319475

Development of the lower half of the Multifunctional Fuselage Demonstrator

Autorzy: S.L. Veldman, J. Kos, I. Fernandez-Villegas
Opublikowane w: 2021
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.5281/zenodo.7350893

THE IMPORTANCE OF ACCOUNTING FOR LARGE SHEAR DEFORMATIONS ON MODELLING MATRIX FAILURE OF THERMOPLASTIC AND THERMOSET COMPOSITES

Autorzy: Tijs, B.H.A.H; Bisagni, C.; Turon, A.
Opublikowane w: 2019
Wydawca: ECCOMAS
DOI: 10.5281/zenodo.7350788

Overview of LPA context & ongoing activity – Active Cockpit

Autorzy: Jean-Jacques Fagot, Manuel Nuñez Jimenez, et. al.
Opublikowane w: 2020
Wydawca: CS2 LPA PT3, CSJU
DOI: 10.5281/zenodo.4264385

HLFC-WIN: Suction Rib Infusion – The Digital Infusion Center in Action

Autorzy: Kleineberg, Markus; Bertling, Dominic; van de Kamp, Bram
Opublikowane w: 2020
Wydawca: Cleansky 2 Composite Materials and Manufacturing Workshop
DOI: 10.5281/zenodo.4501222

Flight procedures automation: Towards flight autonomy in manned aircraft

Autorzy: Gonzalez Garcia-Consuegra, Maria Isabel; Alvarez Díez, Cesar; Gracia Bardaji, Alejandro
Opublikowane w: 2020
Wydawca: Digital Avionics System Conference (DASC)
DOI: 10.5281/zenodo.4090930

Upscaling of In-situ Automated Fiber Placement with LM-PAEK – From Panel to Fuselage

Autorzy: Dominik Deden, Lars Brandt, Lukas Raps, Ines Schiel, Dietfried Henning, Samuel Tröger, Frederic Fischer
Opublikowane w: 2022
Wydawca: EPFL

Building the MFFD upper shell - Production technologies for the world's largest thermoplastic composite structure

Autorzy: Frederic Fischer
Opublikowane w: 2022
Wydawca: American Institute of Aeronautics and Astronautics

Analysis and testing of a thermoplastic composite stiffened panel under compression

Autorzy: K.S. van Dooren, E. Labans, B.H.A.H. Tijs, J. Waleson and C. Bisagni
Opublikowane w: 2019
Wydawca: 22nd International Conference on Composite Materials

UBBICK - Utility Building Blocks for Integrated Cockpit

Autorzy: Nuno Paiva
Opublikowane w: AED days - National showcase 2018, 2018
Wydawca: AED
DOI: 10.5281/zenodo.6619331

Development of a highly adaptable method for structural integrity assessment by means of a removable piezoelectric measurement head for electromechanical impedance determination

Autorzy: Y Park, C. Contell Asins, D. Laveuve, M. Brandt, S. Rieß, M. Gerhardt
Opublikowane w: Proceedings of ISMA2020 including USD2020, 2020, ISBN 978-90-828931-1-3
Wydawca: ISMA

DESIGN OF AN ACTIVE NOISE CONTROL SYSTEM FOR A BUSINESS JET WITH TURBOFAN ENGINES

Autorzy: Malte Misol, Stephan Algermissen, Hans-Peter Monner
Opublikowane w: 2023, ISBN 978-80-11-03423-8
Wydawca: 29th International Congress on Sound and Vibration

CS2 System Integration Test Bench (V1)

Autorzy: M DEMEULENAERE
Opublikowane w: 2021
Wydawca: ETTC21: European Test & Telemetry Conference 2021
DOI: 10.5281/zenodo.5642629

Trajectory optimization for the computation of safe emergency trajectories

Autorzy: ONGALE-OBEYI Maeva GOUBINAT Damien GAROCHE Pierre-Loïc DELAHAYE Daniel
Opublikowane w: 2022
Wydawca: EUCASS 2022
DOI: 10.13009/eucass2022-4593

Introduction and overview of the WP1.2.3

Autorzy: Thomas Haase; Roland Ortiz; Myriam Kaminski; Eberhard Kaulfersch; Yves Toso; Steffen Opitz; Till Julian Adam; Marc Garbade; Lars Trampe
Opublikowane w: 2021
Wydawca: Clean Sky 2 JU
DOI: 10.5281/zenodo.5849618

Measurement methods fusion and application for fluid-structure coupling analysis using PSP/TSP and event-based-imaging-techniques

Autorzy: Henning, Katarina; Hilfer, Michael; Kirmse, Tania; Boden, Fritz
Opublikowane w: 2023
Wydawca: DGLR

Production of the MFFD upper fuselage shell

Autorzy: Frederic Fischer
Opublikowane w: 2023
Wydawca: American Institute of Aeronautics and Astronautics

Innovative manufacturing and MRO -Digitalization of maintenance operations (AeroDays 2019)

Autorzy: Franz Zafra-Evers; Joel Ferreira
Opublikowane w: 2019
Wydawca: AeroDays 2019
DOI: 10.5281/zenodo.4010168

Validation of the simulation tool for environmentally friendly aircraft cargo fire protection system

Autorzy: Arnav Pathak, Victor Norrefeldt
Opublikowane w: IOP Conference Series Materials Science and Engineering, 2021
Wydawca: IOP Publishing
DOI: 10.1088/1757-899x/1024/1/012091

Validation of the zonal model for an Environmentally Friendly Aircraft Cargo Fire Protection System with containerized load

Autorzy: Arnav Pathak, Marie Pschirer, Max Kienberger, Victor Norrefeldt
Opublikowane w: 2021
Wydawca: EASN
DOI: 10.5281/zenodo.7603439

Refined multidisciplinary design and performance of the ONERA Hybrid Electric Distributed Propulsion Concept (DRAGON)

Autorzy: C. Döll, Peter Schmollgruber, David Donjat, Michael Ridel, Italo Cafarelli, Olivier Atinault, et al.
Opublikowane w: 2021
Wydawca: AIAA SciTech 2021
DOI: 10.2514/6.2020-0501

Zonal model validation for an environmentally friendly aircraft cargo fire protection system with containerized load

Autorzy: Arnav Pathak, Marie Pschirer, Maximilian Kienberger, Victor Norrefeldt
Opublikowane w: 2022
Wydawca: ICAS

Transition Prediction for Flows with Suction Using the eN-Method

Autorzy: Normann Krimmelbein
Opublikowane w: 2022
Wydawca: CIMNE
DOI: 10.2514/6.2021-0630

Quality assured fuselage production: Data evaluation of a quality control sensor for thermoplastic automated fiber placement

Autorzy: Monika Mayer, Alfons Schuster, Demas Schmorell, Dominik Deden, Lars Brandt, Frederic Fischer
Opublikowane w: 2022
Wydawca: DGLR e.V.
DOI: 10.25967/570129

Laminar Interface Concept for a HLFC Horizontal Tailplane Leading Edge, Design and Manufacturing Approach

Autorzy: Martin Johannes Schollerer, Christian Ückert, Christian Hühne
Opublikowane w: 2021
Wydawca: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655818

DESIGN OF AN ADVANCED EMPENNAGE AND REAR FUSELAGE CONCEPT FOR A COMMERCIAL AIRCRAFT

Autorzy: Raul C. Llamas Sandín, Caleb D. Handal Rivera
Opublikowane w: 2022, ISSN 2958-4647
Wydawca: International Council of the Aeronautical Sciences

Optimization of DDP test parameters through DoE for AFP process improvement

Autorzy: Dreher, P.N.; Chadwick, A.; Doll, G.
Opublikowane w: ITHEC 4th International Conference & Exhibition on Thermoplastic Composites, 2018, ISBN 978-3-933339-31-7
Wydawca: Trageser GmbH

Aero-Propulsive and Aero-Structural Design Integration of Turboprop Aircraft with Electric Wingtip-Mounted Propellers

Autorzy: Quinty van der Leer & Maurice Hoogreef
Opublikowane w: 2022
Wydawca: AIAA
DOI: 10.2514/6.2022-0167

Cargo Container Characterization for Airplane Crash Applications – Experimental Tests and Validation of Simulation Models (ASIDIC 2019)

Autorzy: Matthias Waimer, Paul Schatrow
Opublikowane w: 2019
Wydawca: Aerospace Structural Impact Dynamics International Conference 2019

Book-keeping Investigations for BLI Aircraft

Autorzy: Ye-Bonne Maldonado, Panagiotis Giannakakis, Benoit Rodriguez, Nicolas Tantot
Opublikowane w: AIAA Propulsion and Energy 2020 Forum, 2020, ISBN 978-1-62410-602-6
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2020-3521

"Conceptual Design Studies of ""Boosted Turbofan"" Configuration for short range (SciTech2020)"

Autorzy: Hecken, Tobias; Zhao, Xin; Iwanizki, Michael; Arzberger, Max J.; Silberhorn, Daniel; Plohr, Martin; Kyprianidis, Konstantinos; Sahoo, Smruti; Valente, Giorgio; Sumsurooa, Sharmila; Sielemann, Michael; Coïc, Clément; Bardenhagen, Andreas; Scheunemann, Annika; Jacobs, Claire
Opublikowane w: 2020
Wydawca: AIAA
DOI: 10.5281/zenodo.3899785

Manufacturing and reinforcement technologies for the next generation aircraft rear end: part 2

Autorzy: Haase, Thomas; Kolbe, Andreas; Nguyen, Duy Chinh; Toso, Yves; Adam, Till Julian
Opublikowane w: Numer 2, 2021
Wydawca: Deutsche Gesellschaft für Luft- und Raumfahrt
DOI: 10.5281/zenodo.5412007

A cohesive phase-field model for intra-laminar damage in fabric composite laminates (CFRAC VI)

Autorzy: Martín de la Escalera, Federico; Essa, Yasser; Pillai, Udit; Triantafyllou, Savvas; Ashcroft, Ian
Opublikowane w: 2019
Wydawca: CFRAC VI - International Conference on Computational Modeling of Fracture and Failure of Materials and Structures
DOI: 10.5281/zenodo.3967388

Advanced methodologies for conceptual design of commercial aircraft empennages

Autorzy: Eduardo González Hernando, Fermín Navarro Medina, Jose Omar Martínez Lucci and Miguel Ángel González Hernández
Opublikowane w: 2019
Wydawca: EUCASS
DOI: 10.13009/eucass2019-290

Clean Sky 2 LPA DISruptive COckpit Large Aircraft demonstrator

Autorzy: Gennaro Formisano
Opublikowane w: 2024
Wydawca: AIAA SciTech
DOI: 10.2514/6.2024-2533

Development of a Medium/Long-Haul Reference Aircraft

Autorzy: Benjamin Fröhler, Jannik Häßy, Mohammad Abu-Zurayk
Opublikowane w: 2022
Wydawca: Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.

DISruptive COckpit demonstrator for Large Aircraft

Autorzy: FORMISANO, Gennaro
Opublikowane w: Numer 1, 2023
Wydawca: GENNARO FORMISANO
DOI: 10.5281/zenodo.8304716

High-speed wind-tunnel investigation of major aerodynamic challenges for HLFC technology

Autorzy: Fabien Mery, Jean-Luc Godard, Maxime Forte, Guillaume Arnoult, Philippe Bardoux, Christophe François, Estelle Piot
Opublikowane w: 56th 3AF International Conference on Applied Aerodynamics, 2022
Wydawca: 3AF

HLFC Leading Edge in Automated Autoclave Infusion

Autorzy: Markus Kleineberg
Opublikowane w: 2021
Wydawca: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655803

Suction and pulsed blowing for control of local wing-engine-slat-cut out flow separation: The INAFLOWT Project

Autorzy: Monat Shay, Maayan Posti, Bar Mizrahi, Ariel Yaniv, Avraham Seifert, Ofek Drori
Opublikowane w: AIAA AVIATION 2020 FORUM, 2020, ISBN 978-1-62410-598-2
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2020-2953

CFD Investigation of High-Lift Propeller Positions for a Distributed Propulsion System

Autorzy: Mário Firnhaber Beckers, Michael Schollenberger, Thorsten Lutz, Dustin Bongen, Rolf Radespiel, Juan Luis Florenciano and David Ernesto Funes-Sebastian
Opublikowane w: 2022
Wydawca: AIAA
DOI: 10.2514/6.2022-3217

The XDC - an overview on the CleanSky 2 demonstrator on common numerical methods and experimental means

Autorzy: Boden, Fritz
Opublikowane w: Numer 3, 2023
Wydawca: DGLR

Impact of Cloud Encounter Mitigation Procedures on Operational and Economic Effectiveness of HLFC Aircraft

Autorzy: Kai Wicke, Florian Linke, Alexander Lau, Kristof Risse, Ahmad Ali Pohya, Benjamin Lührs, Majed Swaid
Opublikowane w: AIAA SciTech Forum 2017, 2017
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2017-1626

IMAGE BASED LANDING SOLUTIONS FOR LARGE PASSENGER AIRCRAFT - IMBALS

Autorzy: Thierry SAMMOUR SAWAYA
Opublikowane w: 2023
Wydawca: ICMAE
DOI: 10.5281/zenodo.8370543

Residual Stresses and Springback Predictive Model (EASN 2019)

Autorzy: Federico Martín de la Escalera, Yasser Essa, Daniela Herrero
Opublikowane w: 2019
Wydawca: 9th EASN International Conference (EASN 2019)
DOI: 10.5281/zenodo.3908275

Assessment-based eco-efficiency estimation of composite and hybrid structures in commercial aircraft

Autorzy: Ali Al-Lami and Markus Kleineberg
Opublikowane w: 2022
Wydawca: University of New Brunswick Fredericton NB E3B 5A3 Canada

Aerodynamical design and analysis of HLFC wings within the European Project HLFC-WIN

Autorzy: Thomas Streit; Martin Kruse; Thomas Kilian; Judith v. Geyr Schweppenburg; Ilias Petropoulos
Opublikowane w: 2022
Wydawca: International Council of the Aeronautical Sciences

LATTICE BOLTZMANN METHOD FOR BROADBAND NOISE PREDICTIONS ON A TURBULENCE-CASCADE TEST RIG INCLUDING SERRATED VANES

Autorzy: M. Buszyk et al.
Opublikowane w: 2022
Wydawca: ICAS

Pure-Inertial AHRS for Navigation of Accelerated Vehicles at High Latitudes

Autorzy: Pavol Malinak
Opublikowane w: 2021
Wydawca: The Institute of Navigation (ION GNSS+ 2021)
DOI: 10.33012/2021.18036

Selection of Alternative Material For High Velocity Impact: Numerical And Experimental Validation Of Performance And Weight Saving

Autorzy: R. Ortiz, Y. Toso, G.Portemont, N. Toso-Pentecôte, D. Joly
Opublikowane w: 2019
Wydawca: Archive ouverte HAL

Structural concept of ECHO - Hybrid bonding and laminar joints

Autorzy: Schollerer, Martin and Ueckert, Christian and Huehne, Christian
Opublikowane w: 2022
Wydawca: Technical University Braunschweig - Institute of Mechanics and Adaptronics
DOI: 10.5281/zenodo.7248366

How to ready production technologies for a thermoplastic composite fuselage

Autorzy: Frederic Fischer
Opublikowane w: 2022
Wydawca: Carbon Fiber 2022

Process data driven advancement of robot-based continuous ultrasonic welding for the dust-free assembly of future fuselage structures (ITHEC 2020)

Autorzy: L. Larsen, D. Görick, M. Engelschall, F.J.C. Fischer, M. Kupke
Opublikowane w: 2020, ISBN 978-90-829101-1-7
Wydawca: 5th International Conference and Exhibition on Thermoplastic Composites

Towards the multimodal detection of sleep in pilots (AEC 2020)

Autorzy: Hicham Atassi; Dariia Averkova; Jan Ciganek; Tomas Kopriva; Bohdan Blaha
Opublikowane w: 2020
Wydawca: Aerospace Europe Conference 2020
DOI: 10.5281/zenodo.4303752

Development of a Numerical Framework for Virtual Testing to Support Design of a Next Generation Thermoplastic Multifunctional Fuselage

Autorzy: Tijs, B.H.A.H.; van Dooren, K.S.; Bisagni, C.; Kos, J.; Martinez, X.; Schippers, H.
Opublikowane w: European Conference on Multifunctional Structures, 2020
Wydawca: European Conference on Multifunctional Structures
DOI: 10.23967/emus.2020.005

Improving Horizontal Stabilizer Performance Using Aeroelastic Tailoring

Autorzy: R.C.M. Cheung, D. Rezgui and J.E. Cooper R.B. Green R.C. Llamas Sandín
Opublikowane w: 2022
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2022-0017

An adaptive structural excitation system as a tool for structure-borne noise research

Autorzy: M. Norambuena & R. Winter
Opublikowane w: 2019
Wydawca: Proceedings of the 23rd International Congress on Acoustics

Design and Analysis of Thermoplastic Welded Stiffened Panels in Post-buckling

Autorzy: Kevin van Dooren Chiara Bisagni
Opublikowane w: 2021
Wydawca: American Society of Composites

Towards Laminar Bizjets (AEC 2020)

Autorzy: Thomas Delille, Thomas Proffit
Opublikowane w: 2020
Wydawca: Aerospace Europe Conference (AEC)
DOI: 10.5281/zenodo.4247468

Design, test and demonstration of an inverter for HLFC compressor applications utilizing a Model-Based Systems Engineering approach

Autorzy: Bismark, Alexander Heinz; Juchmann, Patrick; Bertram, Oliver
Opublikowane w: 2021
Wydawca: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)
DOI: 10.5281/zenodo.5995194

Krenel Density-Based Pattern Classification in Blind Fasteners Installation

Autorzy: Francisco Javier Martínez de Pisón/ Lutz Deitert
Opublikowane w: 2017
Wydawca: International Conference on Hybrid Artificial Intelligence Systems
DOI: 10.1007/978-3-319-59650-1_17

ADVANCEd Aircraft Maintenance 2019

Autorzy: Franz Zafra-Evers
Opublikowane w: 2019
Wydawca: Airbus/DLR
DOI: 10.5281/zenodo.4010144

Laser pretreatment of grade 2 titanium for hybrid Ti/CFRP adhesive joints in tail plane aerospace structures (AB 2019)

Autorzy: U. Lommatzsch, B. Schneider, K. Thiel, M. Brede, F.M. de la Escalera, E. Yasser
Opublikowane w: 2019
Wydawca: 5th international Conference on Structural Adhesive Bonding
DOI: 10.5281/zenodo.3967312

Manufacturing next generation horizontal tail plane (HTP) - the role of surface pretreatment for adhesive joints and functional coatings

Autorzy: U. Lommatzsch, B. Schneider, Dirk Salz, F.M. de la Escalera
Opublikowane w: 2021
Wydawca: University Carlos III of Madrid, Clean Sky 2, AERNNOVA
DOI: 10.24406/publica-166

Multimodal Business Jet cockpit Next-generation human-system interaction

Autorzy: V. Ligier
Opublikowane w: 2021
Wydawca: ESTIA
DOI: 10.5281/zenodo.4668648

DISCO Innovation Machine

Autorzy: Pascal TRAVERSE; Matthieu MAYOLLE
Opublikowane w: Towards Sustainable Aviation (TSAS), 2022
Wydawca: 3AF
DOI: 10.5281/zenodo.8037752

Wind Tunnel Experiments with Local Active Flow Control for Aircraft Towards Future Flight Testing (ICAS 2018)

Autorzy: Vlad Ciobaca, Bruno Stefes, Anton de Bruin, Matthias Bauer, Philipp Schlösser, Niko Bier, Arnoud de Blécourt, Junnai Zhai, Michael Meyer, Jochen Wild
Opublikowane w: 2018
Wydawca: ICAS 2018
DOI: 10.5281/zenodo.4288797

Lifetime prediction of composite materials

Autorzy: M. Kaminski; P. Paulmier
Opublikowane w: Numer 2, 2021
Wydawca: DLR
DOI: 10.5281/zenodo.6089038

Suction and pulsed blowing for control of local wing-engine-slat-cut out flow separation: The INAFLOWT Project (AEC 2020)

Autorzy: Monat Shay, Possti Maayan, Junaid Ullah, Yaniv Ariel, Mizrahi Bar, Drori Ofek, Seifert Avraham
Opublikowane w: 2020
Wydawca: AEC2020 Conference
DOI: 10.5281/zenodo.4288403

STUDY OF THE IMPACT OF AZIMUTHAL FLOW DISTORTION ON IN-DUCT ACOUSTIC PROPAGATION USING A MULTIMODAL FORMULATION

Autorzy: B. Mangin et al.
Opublikowane w: 2022
Wydawca: ICAS

Analysis of matrix-dominated failure in thermoplastic composites and conduction welded joints

Autorzy: Bas H.A.H. Tijs (GKN Fokker & Delft University of Technolog) Albert Turon (University of Girona) Chiara Bisagni (Delft University of Technolog) Joost Koopman (GKN Fokker)
Opublikowane w: 2024
Wydawca: GKN Fokker
DOI: 10.5281/zenodo.10512554

Aerodynamic Design and Analysis of HLFC Wings within the European Project HLFC-WIN

Autorzy: Streit, Thomas; Kruse, Martin; Kilian, Thomas; Petropoulos, Ilias
Opublikowane w: 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022, Numer 1, 2023, ISSN 2958-4647
Wydawca: ICAS 2022

A reduced order model for boundary layer ingestion map prediction at rear-mounted engine nacelle

Autorzy: D. Cinquegrana, P.L. Vitagliano
Opublikowane w: 2021
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2021-0993

Optimization of multistep forming process for thermoplastic composite parts - Process parameters and simulation

Autorzy: D. Nardi, J. Sinke
Opublikowane w: 2019
Wydawca: SAMPE

Advanced Reinforcements - Mechanical Properties and Structural Health Monitoring

Autorzy: Steffen Opitz; Till Julian Adam; Lars Trampe
Opublikowane w: Numer 2, 2021
Wydawca: DLR
DOI: 10.5281/zenodo.6089238

Reduced-Order Model for Large Amplitude Vibrations of Flexible Structures Coupled with a Fluid Flow

Autorzy: T. Flament, J-F. Deü, A. Placzek, M. Balmaseda, D-M. Tran
Opublikowane w: 2022
Wydawca: ECCOMAS

Testing and simulation for fatigue master curve generation and small debris and acoustic wear testing at Fraunhofer

Autorzy: Eberhard Kaulfersch
Opublikowane w: Numer 2, 2021
Wydawca: "Closing Session for the work package ""Advanced reinforcements"
DOI: 10.5281/zenodo.6089137

AEROACOUSTIC PERFORMANCES OF A LOW-NOISE AIRFOIL CASCADE WITH SERRATED LEADING EDGES: PREDICTIONS AND MEASUREMENTS

Autorzy: C. Polacsek et al.
Opublikowane w: 2022
Wydawca: ICAS

CERES: Advanced Rear End Structural test program – Low level tests

Autorzy: K. Muñoz, N. Muñoz, E. Guinaldo, E. Arévalo, M. Jiménez
Opublikowane w: 2021
Wydawca: Aernnova Aerospace & University Carlos III of Madrid (UC3M)
DOI: 10.5281/zenodo.5148355

RTM Carbon Fibre Highly Stressed Structural Fuselage Frames

Autorzy: Carlos Bello
Opublikowane w: 2021
Wydawca: Carlos III University & Aernnova

CS2 LPA-D03-PROTECTED: Evaluation of a next generation oxygen system – assessment of usability, comfort and human performance

Autorzy: Julia Maier; Frank Albers; Victor Oubaid; Matthieu Fromage; Jean-Baptiste Dupuy
Opublikowane w: 2022
Wydawca: German Federal Police
DOI: 10.5281/zenodo.7220904

Impact Studies with Reduced Size Aircraft Stabiliser Demonstrators Including Hybrid Laminar Flow Control Technology

Autorzy: Ritt, Stefan Andreas; Vinot, Mathieu
Opublikowane w: Numer 2, 2021
Wydawca: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655872

Active structural excitation as known source for structure-borne noise research

Autorzy: M. Norambuena & R. Winter
Opublikowane w: 2019
Wydawca: Inter Noise 2019

High-resolution vibroacoustic characterization of DLR's Falcon 2000LX ISTAR aircraft

Autorzy: Winter, Rene; Zettel, Sebastian; Sinske, Julian; Norambuena, Marco
Opublikowane w: 2022
Wydawca: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)

Angle of Attack Effects on Open Fan Propulsion Systems at Take-Off Conditions

Autorzy: Stuermer, Arne
Opublikowane w: 2023
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2023-3305

Towards increased reliability of resistance welded joints for aircraft assembly (ITHEC 2020)

Autorzy: Manuel Endrass, Philipp Gänswürger, Stefan Jarka, Simon Bauer, Frederic J.C. Fischer, Lorenz Ziche, Lars Larsen and Michael Kupke
Opublikowane w: 2020
Wydawca: 5th International Conference and Exhibition on Thermoplastic Composites

γ-TiAl powder characterization in order to explain a case of poor processability by Electron Beam Melting

Autorzy: C. Ghibaudo, A. Sivo, G. Marchese, D. Ugues, S. Biamino
Opublikowane w: 2021
Wydawca: ASMET Euromat 2021 Conference
DOI: 10.5281/zenodo.5749384

Design of hybrid joints CFRP-metal Fracture toughness determination under Mode I and Mode II loading (MECHCOMP2019)

Autorzy: Federico Martín de la Escalera, Yasser Essa, Agustin Chiminelli
Opublikowane w: 2019
Wydawca: 5th International Conference on Mechanics of Composites
DOI: 10.5281/zenodo.3967365

Hail Impact Model for Hybrid Laminar Flow Control (HLFC) Structure (EASN 2019

Autorzy: Federico Martin de la Escalera; Essa Yasser, Miguel Angel Castillo
Opublikowane w: 2019
Wydawca: Europaen Aeronautics Science Network
DOI: 10.5281/zenodo.3908287

Modèle d'endommagement de fatigue en lien avec la microstructure dans un alliage d'aluminium.

Autorzy: Manon Lenglet, Ann Ask, Samuel Forest
Opublikowane w: 2022
Wydawca: MECAMAT

Design concepts for stabilizer leading edges with HLFC technology and bird strike resilience

Autorzy: S.A. Ritt, M. Vinot
Opublikowane w: 2021
Wydawca: Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)
DOI: 10.5281/zenodo.5994793

A study on the chemical and microstructural optimization of the Ti 48 2 2 alloy processed by Electron Beam Melting

Autorzy: M. Galati, C. Ghibaudo, G. Rizza, R. Wartbichler, S. Mayer, L. Iuliano, H. Clemens, D. Ugues, S. Biamino
Opublikowane w: 2020
Wydawca: International Conference on Electron Beam Additive Manufacturing – EBAM2020
DOI: 10.5281/zenodo.5749363

AUTOMATED CABIN AND CARGO LINING AND HAT RACK INSTALLATION FOR THE AIRCRAFT FACTORY OF TOMORROW

Autorzy: Brieskorn, Leander
Opublikowane w: Aerospace Europe Conference 2020, 2020
Wydawca: Aerospace Europe Conference
DOI: 10.5281/zenodo.6545665

Laminar wing manufacturing developments and demonstrators for validation

Autorzy: Castillo Acero, Miguel Á.; Martín de la Escalera, Federico; Cruz, David
Opublikowane w: ECCOMAS CONGRESS 2022, 8th European Congress on Computational Methods in Applied Sciences and Engineering, 2022
Wydawca: ECCOMAS
DOI: 10.5281/zenodo.6637755

Characterization and analysis of the mode I interlaminar fatigue behaviour of thermoplastic composites considering R-curve effec

Autorzy: Bas H.A.H. Tijs
Opublikowane w: 2023
Wydawca: Composites 2023
DOI: 10.5281/zenodo.8420094

Hybrid Laminar Flow Control Activities within the Frame of Clean Sky 2

Autorzy: Alexander Bismark, Martin Wahlich, Martin Radestock, Matthieu Milot, Kfir Menchel, David Cruz
Opublikowane w: 2024
Wydawca: AIAA
DOI: 10.2514/6.2024-1303

Noise reduction with an optimized scarfed nozzle concept

Autorzy: A. Menasria, S. Lemaire and C. Richter
Opublikowane w: 2024
Wydawca: AIAA
DOI: 10.5281/zenodo.10204102

SHM Detection Capabiity Demonstration. The POD - DoE relationship

Autorzy: Nicolas Dominguez, Aurelien Rautureau
Opublikowane w: 2022
Wydawca: A4A NDT Forum

Full-scale particle image velocimetry under open-air conditions

Autorzy: Geisler, Reinhard; Agocs, Janos; Boden, Fritz; Erdogu, Oguzhan; Ewald, Selina; Fuchs, Carsten; Kirmse, Tania; Kleindienst, Tobias; Koop, Lars; Philipp, Florian; Schröder, Andreas; Achmus, Melanie; Heider, Jens; Hammer, Jens; Schulze, Timo
Opublikowane w: 2023
Wydawca: DGLR

PROCESOS DE ALTA CADENCIA EN SECCIONES TRASERAS DE FUSELAJE

Autorzy: Gloria Nuñez, Carlos Bello
Opublikowane w: 2020
Wydawca: AEMAC

Modèle d’ordre réduit pour les vibrations en grande amplitude destructures flexibles sous écoulement fluide

Autorzy: T. Flament, J-F. Deü, A. Placzek, M. Balmaseda, D-M. Tran
Opublikowane w: 2022
Wydawca: CSMA

Numeric optimization of in-situ consolidated panels with different tape sequence strategies

Autorzy: Fricke, Daniel
Opublikowane w: 2021
Wydawca: SAMPE Europe

Integrated Systems Management: Towards Pilot Workload Reduction and Robustness in Degraded Conditions

Autorzy: Jérôme TREANTON
Opublikowane w: AIAA conference: SciTech Forum 2023 USA (National Harbor-MD), 2023
Wydawca: Jérôme TREANTON
DOI: 10.5281/zenodo.8304783

Robotic sequential ultrasonic welding of thermoplastic composites: process development and testing

Autorzy: Abhas Choudhary, Irene Fernandez Villegas
Opublikowane w: Proceedings of the ASC 36TH Annual Technical VIRTUAL Conference, 2021
Wydawca: American Society of Composites

An Analysis of the Influence of Network Effects on Lifecycle Based Aircraft Technology Assessment

Autorzy: Ahmad Ali Pohya, Jennifer Wehrspohn, Kai Wicke
Opublikowane w: 2020
Wydawca: Deutscher Luft- und Raumfahrtkongress 2020
DOI: 10.25967/530039

Multifunctional fuselage demonstrator: thermoplastic composite skin manufacturing developments

Autorzy: W.M. van den Brink, W.J. Vankan, J. de Kruijk, S.L. Veldman( R. Herrmann
Opublikowane w: 2021
Wydawca: II European Conference On Multifunctional Structures (EMuS2020)
DOI: 10.23967/emus.2020.012

Aerodynamic Performance Benefits of Over-the-Wing Distributed Propulsion for Hybrid-Electric Transport Aircraft

Autorzy: Reynard de Vries & Roelof Vos
Opublikowane w: 2022
Wydawca: AIAA
DOI: 10.2514/6.2022-0128

IPS Technology Validation

Autorzy: Michael Olive
Opublikowane w: 2019 Integrated Communications, Navigation and Surveillance Conference (ICNS), 2019, Strona(/y) i-xvi, ISBN 978-1-7281-1893-2
Wydawca: IEEE
DOI: 10.1109/icnsurv.2019.8735183

Numerical modelling of aeronautical composite structure subjected to lightning strike phenomenon (EASN 2019)

Autorzy: Federico Martin de la Escalera, Ignacio Briones, Yasser Essa
Opublikowane w: 2019
Wydawca: Europaen Aeronautics Science Network
DOI: 10.5281/zenodo.3923774

Special Technology Session 08 - Application of Hybrid Laminar Flow Control for Drag Reduction of Transport AircraftAirbus A320 Flight Tests of the AFLoNext Project with the Vertical Tail Plane Equipped by a Hybrid Laminar Flow Control SystemTransition Prediction for Flows with Suction Using the eN-MethodImpact of Homogenous Suction on the Prediction of Drag and Transition for Transport Aircraft

Autorzy: Geza Schrauf Geza Schrauf; Heiko von Geyr Normann Krimmelbein Martin Kruse
Opublikowane w: 2022
Wydawca: Centre Internacional de Mètodes Numèrics a l'Enginyeria (CIMNE)

Numerical simulation of inductive heating in thermoplastic unidirectional cross-ply laminates

Autorzy: A.J. de Wit, N. van Hoorn, L. Straathof, W.J. Vankan
Opublikowane w: Frontiers in Materials, 2023, ISBN 978-2-9701614-0-0
Wydawca: Frontiers
DOI: 10.3389/fmats.2023.1155322

Incremental Nonlinear Control Allocation for an Aircraft withDistributed Electric Propulsion

Autorzy: P. de Heer, C.C. de Visser, M.L. Hoogendoorn and H.W. Jentink
Opublikowane w: 2023
Wydawca: AIAA
DOI: 10.2514/6.2023-1248

Preliminary investigations towards the water uptake in HLFC

Autorzy: Alexander Bismark
Opublikowane w: 2021
Wydawca: AERNNOVA and Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.4655669

Towards a thermoplastic fuselage: Production technologies for the upper shell demonstrator

Autorzy: Fischer, Frederic
Opublikowane w: 2021
Wydawca: AIAA Science & Technology 2021 Forum

GPAHRS – New Building Block to Enhance Safety and Availability of Future Aircraft Navigation

Autorzy: Pavol Malinak, Zdenek Kana, Milos Sotak, Tomas Vaispacher, Radek Baranek, Libor Slabak
Opublikowane w: Proceedings of the 33rd International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GNSS+ 2020), 2020, Strona(/y) 262-289, ISBN 0-936406-26-7
Wydawca: Institute of Navigation
DOI: 10.33012/2020.17574

Développement d’un modèle de flottement gyroscopique prenant en compte la poussée de hélice

Autorzy: V. de Gaudemaris, A. Olivier, A. Placzek, J.-S. Schotté, L. Blanc, F. Thouverez
Opublikowane w: 2022
Wydawca: CSMA

Systematic Approach to Design an Active Hybrid Laminar Flow Control System

Autorzy: Alexander Heinz Bismark, Oliver Bertram
Opublikowane w: 2022
Wydawca: Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.

Progress of the Lower half of the MultiFunctional Fuselage Demonstrator

Autorzy: S.L. Veldman, S. Romero Esteban, J. Kos, I. Fernandez Villegas
Opublikowane w: 2021
Wydawca: Universidad Carlos III & Aernnova
DOI: 10.5281/zenodo.7351246

Data Representativeness in the Context of Pilot State Monitoring: A Case Study on Sleep and Drowsiness Detection and Certification Challenges

Autorzy: Stephane Marche; Dariia Averkova; Hicham Atassi; Jan Ciganek; Tomas Kopriva; Bohdan Blaha
Opublikowane w: 2022
Wydawca: Towards Sustainable Aviation Summit 2022
DOI: 10.5281/zenodo.7705111

Simulation tool for aircraft cargo environment friendly fire protection system evaluation

Autorzy: Arnav Pathak, Victor Norrefeldt, Gunnar Grün
Opublikowane w: 2020
Wydawca: AEC2020
DOI: 10.5281/zenodo.6531579

Nonlinear vortex lattice method for stall prediction

Autorzy: Hasier Goitia Raúl Llamas
Opublikowane w: 2019
Wydawca: EASN
DOI: 10.1051/matecconf/201930402006

Eddy current simulation and experiments for assessments of inductive heating in uni-directional thermoplastic composites

Autorzy: A.J. de Wit, N. van Hoorn, L.S. Straathof, W.J. Vankan
Opublikowane w: ICWAM 2022 International Congress on Welding, Additive Manufacturing and associated non-destructive testing, 8-9 June 2022 - Online, 2023
Wydawca: NLR

Aeronautical structures by automatic lay-up with thermoplastic composites and material behavior

Autorzy: Isabel Martín, Fernando Rodríguez Lence
Opublikowane w: 2018
Wydawca: Avantage Aquitaine
DOI: 10.5281/zenodo.6536555

Aircraft electrification trends and airframe challenges

Autorzy: Miguel Ángel Castillo
Opublikowane w: 2022
Wydawca: AeroTrends 2022

Surface Toughening – An industrial Approach to increase the Robustness of pure adhesive Joints with film adhesives

Autorzy: Martin J. Schollerer, Jens Kosmann, Dirk Holzhüter, Carlos Bello-Larroche, Christian Hühne
Opublikowane w: 2020, ISBN 978-989-9017-17-7
Wydawca: 1st International Conference on Industrial Applications of Adhesives 2020

Numerical aerodynamic performance assessment of HLFCwing configurations using far-field drag analysis

Autorzy: Ilias Petropoulos, Thomas Streit, Thomas Kilian, Martin Kruse
Opublikowane w: 56th Edition of the 3AF International Conference on Applied Aerodynamics, 2022
Wydawca: 3AF - Aeronautical Association and Astronautics France

Protected: Evaluation eines neuartigen Sauerstoffsystems für Piloten. Erste Ergebnisse

Autorzy: Maier, Julia; Albers, Frank; Oubaid, Viktor
Opublikowane w: 2022
Wydawca: Bundespolizei-Fliegergruppe

Smart structural excitation: Simplifying vibroacoustic research

Autorzy: Norambuena, Marco
Opublikowane w: 2022
Wydawca: DLR

Active control of wing-engine-slat cut-out region flow separation

Autorzy: M. Possti, A. Yaniv and A. Seifert
Opublikowane w: 2019
Wydawca: 3AF International Conference
DOI: 10.5281/zenodo.4288358

Robot-based Continuous Ultrasonic Welding for Automated Production of Aerospace Structures

Autorzy: M. Engelschall, L. Larsen, F. Fischer, M. Kupke
Opublikowane w: 2019, ISBN 978-90-829101-1-7
Wydawca: Society for the Advancement of Material and Process Engineering

Numerical simulation of eddy current generation in uni-directional thermoplastic composites

Autorzy: Wit, A.J. de Hoorn, N. van Nahuis, B.R. Vankan, W.J.
Opublikowane w: 2023
Wydawca: NLR

INFLUENCE OF THE ANGLE BETWEEN ADHERENDS ON ULTRASONIC WELDING OF THERMOPLASTIC COMPOSITES

Autorzy: Camila B.G. Brito, Julie Teuwen, Clemens Dransfeld, Irene Fernandez Villegas
Opublikowane w: 2020
Wydawca: Scipedia
DOI: 10.23967/emus.2020.006

Assessment of numerical simulation for different promising material/concepts for structural reinforcement

Autorzy: R.Ortiz, G.Portemont, R.De Coninck, A.Peroche
Opublikowane w: 2021
Wydawca: Universidad Carlos III de Madrid
DOI: 10.5281/zenodo.6860116

CleanSky2 Advanced Rear End Demonstrator

Autorzy: E. Guinaldo
Opublikowane w: 2024
Wydawca: AIAA
DOI: 10.2514/6.2024-1302

Development of continuous ultrasonic welding for the automated production of aircraft primary structures

Autorzy: Larsen, L., Engelschall, M.; Jarka, S.; Fischer, F.;
Opublikowane w: 2019
Wydawca: 4th Internation Conference & Exhibition on Thermoplastic Composites

Accurate structural excitation through adaptive control (ISMA 2018)

Autorzy: M. Norambuena, R. Winter & J. Biedermann
Opublikowane w: 2018
Wydawca: 28th International Conference on Noise and Vibration engineering

humm3: a flexible, precise heat solution for rapid, controllable and safe layup of thermoplastics (JEC 2019)

Autorzy: Andreas Kolbe
Opublikowane w: 2019
Wydawca: JEC 2019
DOI: 10.5281/zenodo.4035919

PROCESS SIMULATION OF THE IN-SITU AUTOMATED FIBER PLACEMENT PROCESS FOR THERMOPLASTIC COMPOSITES

Autorzy: D. Fricke and F. Fischer
Opublikowane w: 2020
Wydawca: Society for the Advancement of Material and Process Engineering (SAMPE)

Generating durable Ti/CFRP adhesive joints for aerospace structures by laser pretreatment

Autorzy: Uwe Lommatzsch, B. Schneider, K. Thiel, M. Brede, F.M. de la Escalera, Y. Essa
Opublikowane w: 2020
Wydawca: CEAS / 3AF
DOI: 10.24406/publica-286

Virtual testing of thermoplastic composites: Towards a hybrid simulation-physical testing pyramid (ECCM18)

Autorzy: B.H.A.H. Tijs, CS Lopes, A. Turon, C. Bisagni, J. Waleson, J.W. van Ingen, S.L. Veldman
Opublikowane w: Proceedings of the 18th European Conference on Composite Materials: 24-28th June 2018, Athens, Greece, 2018, ISBN 9781510896932
Wydawca: 18th European Conference on Composite Materials

Experimental Investigation of Shear Grazing Flow Effects on Extended Tube Acoustic Liners

Autorzy: Remi Roncen, Delphine Sebbane, Fabien Mery, Estelle Piot, Frank Simon
Opublikowane w: 2020
Wydawca: EAA (European Acoustics Association) / SFA (Société Française d'Acoustique)
DOI: 10.48465/fa.2020.0225

Validation of an advanced Turbulent Boundary Layer noise model using low speed wind tunnel tests on a Falcon fuselage

Autorzy: V. Bonneau, S. Lemaire, V. Fleury, Y. Revalor
Opublikowane w: 2022
Wydawca: AIAA
DOI: 10.5281/zenodo.10204173

Internet Protocol Suite for Safety Services: Validation with next generation avionics

Autorzy: Michal Skorepa, Michael L. Olive
Opublikowane w: 2021
Wydawca: DASC
DOI: 10.1109/dasc52595.2021.9594318

Challenges of hybrid laminar flow control (HLFC) in aircraft design and manufacturing (ECCM18)

Autorzy: Martín de la Escalera, Federico; Essa, Yasser; Castillo Acero, Miguel Á.; Pillai, Udit; Chiminelli, Agustín; Lizaranzu, M.; Maimi, Pere
Opublikowane w: Numer 2, 2018
Wydawca: 18th European Conference on Composite Materials (ECCM18)
DOI: 10.5281/zenodo.3967430

TASG – An integrated method for the aerodynamic design of HLFCsystems (DLRK 2020)

Autorzy: Thomas Kilian, Sven Wedler
Opublikowane w: 2020
Wydawca: Deutscher Luft- und Raumfahrtkongress 2020
DOI: 10.5281/zenodo.4019107

CLEAN SKY 2 - Technologies for Pilot Workload Reduction

Autorzy: Cesar Alvarez - Airbus DS HF specialist Jesus Lapastora - Airbus DS HO Simulation
Opublikowane w: 2020
Wydawca: Airbus DS
DOI: 10.5281/zenodo.4090950

Laminar Flow Control along the Attachment Line of a Swept Wing

Autorzy: Jeanne Methel, Fabien Méry, Olivier Vermeersch, Maxime Forte
Opublikowane w: 8th European Congress on Computational Methods in Applied Sciences and Engineering, 2022
Wydawca: ECCOMAS - European Community on Computational Methods in Applied Sciences

High-resolution vibroacoustic measurement and analysis of the DLR ISTAR aircraft to assess engine-induced cabin noise

Autorzy: Winter, Rene; Zettel, Sebastian; Sinske, Julian; Norambuena, Marco
Opublikowane w: 2022, ISBN 978-1-906913-42-7
Wydawca: INTER-NOISE

Resistance Welding of Low-Melt Polyaryletherketone: Process Definition andOptimization

Autorzy: Manuel Endrass, Anton Thomé, Victor Gadletz, Simon Bauer, Stefan Jarka, Philipp Gänswürger, Frederic Fischer, Stefan Ferstl, Lars Larsen and Michael Kupke
Opublikowane w: 2022
Wydawca: EPFL

Manufacturing of the largest thermoplastic fuselage skin in the world

Autorzy: Robert de Graaf, Joachim de Kruijk
Opublikowane w: 2021
Wydawca: NLR

Modern Avionics Challenges

Autorzy: Nuno Paiva
Opublikowane w: 2019
Wydawca: Airline Suppliers
DOI: 10.5281/zenodo.6628984

Application of Lightning Strike Protection on Thermoplastic Structures by Automated Fiber Placement (IHTEC 2020)

Autorzy: Chinh Nguyen; Andreas Kolbe; Constantin Bäns
Opublikowane w: 2020
Wydawca: 5th International Conference and Exhibition on Thermoplastic Composites
DOI: 10.5281/zenodo.4088564

Energy efficiency improvements in the development of new aircraft, Aernnova in Cleansky 2

Autorzy: Miguel Ángel Castillo
Opublikowane w: 2019
Wydawca: Smart Energy Congress 2019
DOI: 10.5281/zenodo.3907841

Wing deformation measurements for manoeuvres of high load at the Airbus A320 DLR-ATRA by means of Image Pattern Correlation Technique

Autorzy: Tania Kirmse, Ralf Meyer, Fritz Boden
Opublikowane w: 2021, Strona(/y) 179-184
Wydawca: ETTC 2021 European Test and Telemetry Conference

MFACTURING OF THERMOPLASTIC FUSELAGE SKINS BY USE OF XENON FLASHLAMP ASSISTED AUTOMATED FIBER PLACEMENT

Autorzy: Kolbe Andreas
Opublikowane w: Numer 2, 2021
Wydawca: Aernnova Aerospace & University Carlos III of Madrid (UC3M)
DOI: 10.5281/zenodo.4954322

Comparison of Direct Operating Cost and Life Cycle Cost-Benefit Methods in Aircraft Technology Assessment

Autorzy: Ahmad A. Pohya, Kai Wicke, Johannes Hartmann
Opublikowane w: 2018 AIAA Aerospace Sciences Meeting, 2018, ISBN 978-1-62410-524-1
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-0282

INFODAY 11ª CONVOCATORIA DE PROPUESTAS CLEAN SKY 2 JU

Autorzy: Cristina Sánchez
Opublikowane w: 2020
Wydawca: Agencia IDEA & CDTI

Common Numerical Methods & Common Experimental Means for the Demonstrators of the Large Passenger Aircraft Platforms (AEC 2020)

Autorzy: Wolf R. Krüger, Fritz Boden, Tania Kirmse, Jonathan Lemarechal, Andreas Schröder, Hans Peter Barth, Sebastian Oertwig, Henri Siller, Jan Delfs, Antoine Moreau, Dominik Schäfer, Arne Stürmer, Marco Norambuena
Opublikowane w: 2020
Wydawca: Aerospace Europe Conference 2020

Bird strike By Artificial and Real Birds on Aircraft Leading Edges

Autorzy: Ritt, Stefan Andreas and Sirtautas, Justas
Opublikowane w: 2023
Wydawca: DAVVL - Verband für biologische Flugsicherheit

Large carbon fibre reinforced thermoplastic fuselage manufacturing supported by virtual processing

Autorzy: W.M. van den Brink; J. Kos; W.J. Vankan; A.J. de Wit
Opublikowane w: 7th Aircraft Structural Design Conference, Limerick, 2020, ISSN 2052-451X
Wydawca: RAeS

Fiber Laser Based Single Pulse Drilling for Production of Perforated Ti-tanium Sheets for HLFC Structures

Autorzy: Ocana, Roberto; Soriano, Carlos; Esmoris, Jose I.; Sanchez, Rafael
Opublikowane w: Journal of Laser Micro/Nanoengineering, 2019, ISSN 1880-0688
Wydawca: Japan Laser Processing
DOI: 10.2961/jlmn.2019.01.0010

Nuevo proceso de fabricación avanzada para secciones traseras de fuselaje de estructuras aeroespaciales altamente integradas

Autorzy: G. Nuñez-Márquez, P. Tabarés-Fernández, M. Mora-Mendías.
Opublikowane w: Revista de la asociación española de materiales compuestos, Numer Vol. 6 Núm. 2 (2022): Monográfico: Proyectos Europeos. Parte II, 2022, Strona(/y) p. 26-31, ISSN 2531-0739
Wydawca: AEMAC

Propagation of Acoustic Waves in Ducts with Flow Using the Multimodal Formulation

Autorzy: Gwénaël Gabard; Majd Daroukh; Bruno Mangin
Opublikowane w: AIAA Journal, Numer Volume 61, Number 6 May 2023, 2023, ISSN 1533-385X
Wydawca: AIAA
DOI: 10.2514/1.j062659

Numerical Assessment of Turbulence-Cascade Noise Reduction and Aerodynamic Penalties from Serrations

Autorzy: M. Buszyk and al.
Opublikowane w: AIAA Journal Volume 60, Number 6June 2022, 2022, ISSN 1533-385X
Wydawca: AIAA
DOI: 10.2514/1.j061301

On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action

Autorzy: R. Wartbichler, C. Ghibaudo, M. Galati, S. Biamino, D. Ugues, H. Clemens, S. Mayer
Opublikowane w: Advanced Engineering Materials, Numer 15272648, 2021, ISSN 1527-2648
Wydawca: Wiley-VCH GmbH
DOI: 10.1002/adem.202101199

Parallel hybrid electric propulsion architecture for single aisle aircraft - powertrain investigation

Autorzy: Jos Vankan, Wim Lammen
Opublikowane w: MATEC Web of Conferences, Numer 304, 2019, Strona(/y) 03008, ISSN 2261-236X
Wydawca: Europaen Aeronautics Science Network
DOI: 10.1051/matecconf/201930403008

Technologien für eine nachhaltige Luftfahrt – Der Small-Scale-Demonstrator im Projekt HLFC-WIN

Autorzy: Sven Ropte, Bram van de Kamp
Opublikowane w: Innovationsbericht 2021 des Instituts für Faserverbundleichtbau und Adaptronik, 2021, Strona(/y) 46-47, ISSN 2567-7713
Wydawca: Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR)

Bitte nicht stören - Laminarhaltung der Grenzschicht an Trennstellen

Autorzy: Schollerer, Martin
Opublikowane w: Innovationsbericht 2021, 2021, Strona(/y) 40-41, ISSN 2567-7713
Wydawca: Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR)

Full process chain simulation of the (wire-based) laser metal deposition process towareds fatigue life prediction

Autorzy: Tim Koenis, Wouter van den Brink, Marko Bosman
Opublikowane w: Procedia Structural Integrity 34, 2021, Strona(/y) 235–246, ISSN 2452-3216
Wydawca: Elsevier
DOI: 10.1016/j.prostr.2021.12.034

An application of the multiple-scales theory to acoustic double transition in ducts with flow

Autorzy: B. Mangin et al.
Opublikowane w: Journal of Sound and Vibration Volume 539, 24 October 2022, 117252, 2022, ISSN 0022-460X
Wydawca: Academic Press
DOI: 10.1016/j.jsv.2022.117252

Some specific challenges of HLFC design on a long-range wing

Autorzy: Geza Schrauf and Thomas Kilian
Opublikowane w: New Results in Numerical and Experimental Fluid Mechanics XIV, 23nd STAB/DGLR Symposium 2022, 2023, ISSN 1612-2909
Wydawca: Springer Science + Business Media

Verbesserung durch Vereinfachung – Mit optimierter Struktur zum erfolgreichen Vogelschlagtest

Autorzy: Andreas Schröder
Opublikowane w: Innovationsbericht 2021 des Instituts für Faserverbundleichtbau und Adaptronik, 2021, Strona(/y) 54-55, ISSN 2567-7713
Wydawca: Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR)

Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF)

Autorzy: Bassini E., Sivo A., Martelli P. A., Rajczak E. , Marchese G. Calignano F, Biamino S, Ugues D.
Opublikowane w: Journal of Alloys and Compounds Volume 905, 5 June 2022, 164213, 2022, ISSN 0925-8388
Wydawca: Elsevier BV
DOI: 10.1016/j.jallcom.2022.164213

Dynamic-stall measurements using time-resolved pressure-sensitive paint on double-swept rotor blades

Autorzy: Armin Weiss; Reinhard Geisler; Martin M. Müller; Christian Klein; Ulrich Henne; Johannes N. Braukmann; Johannes Letzgus
Opublikowane w: Experiments in Fluids, Numer 63:15, 2021, ISSN 0723-4864
Wydawca: Springer Verlag
DOI: 10.1007/s00348-021-03366-6

Design and manufacturing of a reinforced fuselage structure by automatic laying-up and in-situ consolidation with co-consolidation of skin and stringers using thermoplastic composite materials

Autorzy: Maria-Isabel Martin
Opublikowane w: Heliyon, Numer VOLUME 9, ISSUE 1, E12728, JANUARY 2023, 2022, ISSN 2405-8440
Wydawca: Elsevier Ltd
DOI: 10.1016/j.heliyon.2022.e12728

Laser micro drilling methods for perforation of aircraft suction surfaces

Autorzy: Andreas Stephen, Roberto Ocana, Joseba Esmoris, Claus Thomy, Carlos Soriano, Frank Vollertsen, Rafael Sanchez
Opublikowane w: Procedia CIRP, Numer 74, 2018, Strona(/y) 403-406, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2018.08.157

Miniaturization and Model-Integration of the Optical Measurement System for Temperature-Sensitive Paint Investigations

Autorzy: Jonathan Lemarechal; Benjamin Daniel Dimond; Hans Peter Barth; Michael Hilfer; Christian Klein
Opublikowane w: Sensors; Volume 23; Numer 16; Pages: 7075, 2023, ISSN 1424-8220
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s23167075

CF/LM-PAEK: Characterisation and sensitivity to critical process parameters for automated fibre placement

Autorzy: Raps, Lukas; Chadwick, Ashley; Schiel, Ines; Schmidt, Isabelle
Opublikowane w: Composite Structures, Numer Volume 284, 2022, ISSN 0263-8223
Wydawca: Elsevier BV
DOI: 10.1016/j.compstruct.2021.115087

Aeroacoustics Assessment of an Hybrid Aircraft Configuration with Rear-Mounted Boundary Layer Ingested Engine

Autorzy: Francesco Petrosino; Mattia Barbarino; Martin Staggat
Opublikowane w: Volume 11, Numer 2, 2021, ISSN 2076-3417
Wydawca: MDPI
DOI: 10.3390/app11072936

Strength prediction of adhesively bonded single lap joints with the eXtended Finite Element Method

Autorzy: O. Völkerink, J. Kosmann, M. J. Schollerer, D. Holzhüter, C. Hühne
Opublikowane w: The Journal of Adhesion, Numer 95/5-7, 2019, Strona(/y) 474-494, ISSN 0021-8464
Wydawca: Taylor & Francis
DOI: 10.1080/00218464.2018.1553120

Simulation of an Aeronautical Product Assembly Process Driven by a Metrology Aided Virtual Approach

Autorzy: GORKA KORTABERRIA, UNAI MUTILBA, JON EGUSKIZA, JOEL MARTINS
Opublikowane w: """New Trends and Advances in Manufacturing Metrology"" Metrology 2022, 2(4), 427-445", 2022, ISSN 2673-8244
Wydawca: MDPI
DOI: 10.3390/metrology2040026

Design analysis for thermoforming of thermoplastic composites: prediction and machine learning-based optimization

Autorzy: Davide Nardi Jos Sinke
Opublikowane w: Composites Part C: Open Access, Numer Volume 5, 2021, ISSN 2666-6820
Wydawca: Elsevier B.V.
DOI: 10.1016/j.jcomc.2021.100126

A pragmatic approach for a 3D material model considering elasto-plastic behaviour, damage initiation by Puck or Cuntze and progressive failure of fibre-reinforced plastics

Autorzy: O. Völkerink, E. Petersen, J. Koord, C. Hühne
Opublikowane w: Computers & Structures, Numer 236, 2020, Strona(/y) 106280, ISSN 0045-7949
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compstruc.2020.106280

Development of a medium/long‑haul reference aircraft

Autorzy: Fröhler, Benjamin and Häßy, Jannik and Abu-Zurayk, Mohammad
Opublikowane w: CEAS Aeronautical Journal, Numer Volume 14, issue 3, July 2023, 2023, Strona(/y) Pages: 693 - 713, ISSN 1869-5582
Wydawca: Springer Science + Business Media
DOI: 10.1007/s13272-023-00662-1

Compensation of Modeling Errors for the Aeroacoustic Inverse Problem with Tools from Deep Learning

Autorzy: Hans-Georg Raumer, Daniel Ernst, Carsten Spehr
Opublikowane w: Acoustics 2022, 4(4), 834-848, 2022, ISSN 2624-599X
Wydawca: MPDI.com
DOI: 10.3390/acoustics4040050

Performance analysis of an electrically assisted propulsion system for a short-range civil aircraft

Autorzy: A W X Ang, A Gangoli Rao, T Kanakis, W Lammen
Opublikowane w: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Numer 233/4, 2019, Strona(/y) 1490-1502, ISSN 0954-4100
Wydawca: Mechanical Engineering Publications Ltd.
DOI: 10.1177/0954410017754146

Aerodynamic Performance Benefits of Over-the-Wing Distributed Propulsion for Hybrid-Electric Transport Aircraft

Autorzy: Reynard de Vries & Roelof Vos
Opublikowane w: Journal of Aircraft, 2023, ISSN 1533-3868
Wydawca: AIAA
DOI: 10.2514/1.c036909

Sub-scale flight test model design: Developments, challenges and opportunities

Autorzy: A.Raju Kulkarni, G. La Rocca, L.L.M.Veldhuis, G.Eitelberg
Opublikowane w: Progress in Aerospace Sciences, Numer 130, 2021, ISSN 0376-0421
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.paerosci.2021.100798

Boundary layer instability over a rotating slender cone under non-axial inflow

Autorzy: Sumit Tambe, Ferry Schrijer, Arvind Gangoli Rao and Leo Veldhuis
Opublikowane w: Journal of Fluid Mechanics, Numer Volume 910, 2021, Article number A25, 2021, ISSN 0022-1120
Wydawca: Cambridge University Press
DOI: 10.1017/jfm.2020.990

Recent developments of common numerical methods and common experimental means within the framework of the large passenger aircraft program

Autorzy: Boden, F. Barth, H. P. Hein, S. Heitmann, D. Kirmse, T. Klein, C. Krüger, W. Lemarechal, J. Norambuena, M. Schäfer, D. Schnell, R. Sinha, K. Theiß, A. Weiss, A.
Opublikowane w: CEAS Aeronaut J 14, 281–293 (2023), 2023, Strona(/y) 281–293, ISSN 1869-5590
Wydawca: CEAS
DOI: 10.1007/s13272-022-00635-w

ON IMPROVING PROCESS EFFICIENCY AND WELD QUALITY IN ULTRASONIC WELDING OF MISALIGNED THERMOPLASTIC COMPOSITE ADHERENDS

Autorzy: Camila Brito, Julie Teuwen, Irene Fernandez Villegas
Opublikowane w: Composite Structures Volume 304, Part 2, 15 January 2023, 116342, 2023, ISSN 0263-8223
Wydawca: Elsevier BV
DOI: 10.1016/j.compstruct.2022.116342

The effects of misaligned adherends on static ultrasonic welding of thermoplastic composites

Autorzy: C.B.G. Brito. J. Teuwen, C. Dransfeld, I.F. Villegas
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer Volume 155, April 2022, 2022, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2022.106810

Discharge characteristics of drilled throttle orifices in fiber-reinforced plastics for an HLFC system

Autorzy: T. Kilian, T. Forßbohm, A. Seitz, B. Flache
Opublikowane w: CEAS Aeronautical Journal, Numer 11/2, 2020, Strona(/y) 431-439, ISSN 1869-5582
Wydawca: Springer Science + Business Media
DOI: 10.1007/s13272-019-00416-y

Deconvolution of Wave-Number-Frequency Spectra of Wall Pressure Fluctuations

Autorzy: Simon L. Prigent, Édouard Salze, Christophe Bailly
Opublikowane w: AIAA Journal, Numer 58/1, 2020, Strona(/y) 164-173, ISSN 0001-1452
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/1.j058203

Reynolds number and wind tunnel wall effects on the flow field around a generic UHBR engine high-lift configuration

Autorzy: Junaid Ullah, Aleš Prachař, Miroslav Šmíd, Avraham Seifert, Vitaly Soudakov, Thorsten Lutz, Ewald Krämer
Opublikowane w: CEAS Aeronautical Journal, Numer 11/4, 2020, Strona(/y) 1009-1023, ISSN 1869-5582
Wydawca: Springer Science + Business Media
DOI: 10.1007/s13272-020-00463-w

Numerical Analysis of Thermoplastically Welded CFRPStructures

Autorzy: Dr. Janko Kreikemeier, M.Sc. Agit Abdulkadir
Opublikowane w: Applied Composite Materials (2022), 2022, ISSN 1573-4897
Wydawca: Applied Composite Materials
DOI: 10.1007/s10443-022-10076-7

Characterization and analysis of the interlaminar behavior of thermoplastic composites considering fiber bridging and R-curve effects

Autorzy: B.H.A.H. Tijs, S. Abdel-Monsef, J. Renart, A. Turon and C. Bisagni
Opublikowane w: Composites Part A: Applied Science and Manufacturing Volume 162 November 2022, 2022, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2022.107101

Introducing variance-based global sensitivity analysis for uncertainty enabled operational and economic aircraft technology assessment

Autorzy: Pohya, Ahmad Ali; Wicke, Kai; Kilian, Thomas
Opublikowane w: Aerospace Science and Technology, Numer Volume 122, 2022, ISSN 1270-9638
Wydawca: Elsevier BV
DOI: 10.1016/j.ast.2022.107441

Experimental and numerical evaluation of conduction welded thermoplastic composite joints

Autorzy: B.H.A.H. Tijs, M.H.J. Doldersum, A. Turon, J.E.A. Waleson, C. Bisagni
Opublikowane w: Composite Structures, Numer Volume 281, 2022, ISSN 0263-8223
Wydawca: Elsevier BV
DOI: 10.1016/j.compstruct.2021.114964

Design, analysis and testing of thermoplastic welded stiffened panels to investigate skin-stringer separation in post-buckling

Autorzy: Kevin van Dooren, Chiara Bisagni
Opublikowane w: Composites Part B: Engineering, Numer Volume 267, December 2023, 111033, 2023, ISSN 1359-8368
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2023.111033

Surface toughening – An industrial approach to increase the robustness of pure adhesive joints with film adhesives

Autorzy: MJ Schollerer, J Kosmann, D Holzhüter, C Bello-Larroche, C Hühne
Opublikowane w: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Numer 234/13, 2020, Strona(/y) 1980-1987, ISSN 0954-4100
Wydawca: Mechanical Engineering Publications Ltd.
DOI: 10.1177/0954410020950071

Engineering Method to Estimate the Blade Loading of Propellers in Nonuniform Flow

Autorzy: Nando van Arnhem, Reynard de Vries, Tomas Sinnige, Roelof Vos, Georg Eitelberg, Leo L. M. Veldhuis
Opublikowane w: AIAA Journal, Numer 58/12, 2020, Strona(/y) 5332-5346, ISSN 0001-1452
Wydawca: American Institute of Aeronautics and Astronautics
DOI: 10.2514/1.j059485

Quality Prediction of Continuous Ultrasonic Welded Seams of High-Performance Thermoplastic Composites by means of Artificial Intelligence

Autorzy: D. Görick; Lars-Christian Larsen; M. Engelschall; Alfons Schuster
Opublikowane w: Procedia Manufacturing (FAIM 2021), Numer Volume 55, 2021, Strona(/y) 116-123, ISSN 2351-9789
Wydawca: Elsevier B.V.
DOI: 10.1016/j.promfg.2021.10.017

Acoustic Feedback and Its Impact on Fan Flutter in Short Aeroengine Intakes

Autorzy: Schnell, Rainer; Frey, Christian
Opublikowane w: Journal of Propulsion and Power, Numer Journal of Propulsion and Power 2022 38:4, pp. 631–646, 2022, ISSN 1533-3876
Wydawca: AIAA
DOI: 10.2514/1.b38567

Influence of Fluid Viscosity and Compressibility on Nonlinearities in Generalized Aerodynamic Forces for T-tail Flutter

Autorzy: Dominik Schäfer
Opublikowane w: Aeroelasticity, Volume III (A special issue of Aerospace), 2022, ISSN 2226-4310
Wydawca: MDPI com
DOI: 10.3390/aerospace9050256

Aerodynamic Interaction Between Propellers of a Distributed- Propulsion System in Forward Flight

Autorzy: Reynard de Vries, Nando van Arnhem, Tomas Sinnige, Roelof Vos, and Leo L. M. Veldhuis
Opublikowane w: Aerospace Science and Technology, Numer Volume 118, November 2021, 107009, 2021, ISSN 1270-9638
Wydawca: Elsevier BV
DOI: 10.1016/j.ast.2021.107009

An investigation of in-situ AFP process parameters using CF/LM-PAEK

Autorzy: Ines Schiel, Lukas Raps, Ashley R. Chadwick, Isabelle Schmidt, Manuel Simone, Sebastian Nowotny
Opublikowane w: Advanced Manufacturing: Polymer & Composites Science, Numer 6/4, 2020, Strona(/y) 191-197, ISSN 2055-0340
Wydawca: Taylor & Francis Group
DOI: 10.1080/20550340.2020.1826772

Cloud Encounter Impact on Operational and Economical Effectiveness of Hybrid-Laminar-Flow-Control Aircraft

Autorzy: Ahmad Ali Pohya, Kai Wicke, Kristof Risse, Florian Linke, Alexander Lau, Benjamin Lührs, Majed Swaid
Opublikowane w: Journal of Aircraft, Numer 56/4, 2019, Strona(/y) 1513-1523, ISSN 1533-3868
Wydawca: American Institute of Aeronautics and Astronautics, Inc.
DOI: 10.2514/1.c035205

Assessment of Reynolds-Averaged Navier–Stokes/Blade Element Theory Body Force Method for Propeller Modeling

Autorzy: H. Pantel, F. Falissard, G. Dufour
Opublikowane w: AIAA Journal, Numer Volume 62, Number 2, 2024, ISSN 1533-385X
Wydawca: AIAA (American Institute of Aeronautics and Astronautics)
DOI: 10.2514/1.j063302

Morphed Vertical Tailplane Assessment for CertificationRequirements

Autorzy: Miguel A. Castillo-Acero, Cristina Cuerno-Rejado and Miguel A. Gómez-Tierno
Opublikowane w: Journal of Aerospace Science and Technology Volume 2, Number 1, January 2016, 2017, ISSN 2332-8258
Wydawca: David Publishing Company
DOI: 10.17265/2332-8258/2016.01.005

Validation of a Simulation Tool for an Environmentally Friendly Aircraft Cargo Fire Protection System

Autorzy: Arnav Pathak, Victor Norrefeldt, Marie Pschirer
Opublikowane w: Aerospace, Numer 8/2, 2021, Strona(/y) 35, ISSN 2226-4310
Wydawca: 10th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens
DOI: 10.3390/aerospace8020035

Skin-stringer separation in post-buckling of butt-joint stiffened thermoplastic composite panels

Autorzy: K.S.van Dooren B.H.A.H.Tijs J.E.A.Waleson C.Bisagni
Opublikowane w: Composite Structures Volume 304, Part 2, 15 January 2023, 116294, 2023, ISSN 0263-8223
Wydawca: Elsevier BV
DOI: 10.1016/j.compstruct.2022.116294

The importance of accounting for large deformation in continuum damage models in predicting matrix failure of composites

Autorzy: B. Tijs C. Davila A. Turon C. Bisagni
Opublikowane w: Composites Part A: Applied Science and Manufacturing Volume 164, January 2023, 107263, 2023, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2022.107263

Preliminary Design and System Considerations for an Active Hybrid Laminar Flow Control System

Autorzy: Kalarikovilagam Srinivasan, Bertram
Opublikowane w: Aerospace, Numer 6/10, 2019, Strona(/y) 109, ISSN 2226-4310
Wydawca: Aeronautical Systems for Flow Control
DOI: 10.3390/aerospace6100109

Road to Acquisition: Preparing a MEMS Microphone Array for Measurement of Fuselage Surface Pressure Fluctuations.

Autorzy: Thomas Ahlefeldt; Stefan Haxter; Carsten Spehr; Daniel Ernst; Tobias Kleindienst
Opublikowane w: Micromachines, Vol 12, Iss 961, p 961 (2021), 2021, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi12080961

Allowables evaluation for the design of a thermoplastic fuselage

Autorzy: K. Muñoz, M. Jiménez, M. J. Mesa, R. Cabrera, S. Anaya, R. Elices, K. Fernández, M. I. Martín, J. Cuenca
Opublikowane w: Volume 07 - COMUNICACIONES MATCOMP21 (2022), Numer Núm. 4 - Aplicaciones Industriales - Caracterización, 2022, 2022, ISSN 2531-0739
Wydawca: Association of Composite Materials (AEMAC)
DOI: 10.23967/r.matcomp.2022.10.004

ONE OF THE WORLD'S LARGEST THERMOPLASTIC AEROSTRUCTURES SUCCESSFULLY COMPLETED IN STUNNING PROJECT

Autorzy: Marianne Mulder, Kees de Waal, Nadia Haifi, Ineke Boneschansker
Opublikowane w: 2023
Wydawca: GKN Aerospace - Fokker Aerostructures BV

HLFC-WIN - Innovative laminar wing concept for the low-emission aircraft of the future

Autorzy: Thomas Kilian
Opublikowane w: 2020
Wydawca: DLR

Cargo Door Demo day

Autorzy: Jakob Ring
Opublikowane w: 2021
Wydawca: SAAB

Effizient unterwegs – Langstreckenflugzeuge mit laminarer Umströmung

Autorzy: Andreas Schröder, Markus Kleineberg, Thomas Haase
Opublikowane w: 2020
Wydawca: DLR

Round table about usage of LIFI in aircraft

Autorzy: Philippe PRILLEUX
Opublikowane w: 2019
Wydawca: Tom Travel (Digital Tourism Media)

Thermoplastic composites welding advances for more sustainable airframes

Autorzy: Ginger Gardiner
Opublikowane w: 2022
Wydawca: CompositesWorld

Thermoplastic composites for primary aircraft structures

Autorzy: Bas Tijs, Bas Veldman, Arnt Offringa
Opublikowane w: 2019
Wydawca: New trends in composite materials workshop

DEWTECOMP PROJECT

Autorzy: Alessandro MARSEGLIA (CETMA)
Opublikowane w: 2021
Wydawca: AERNNOVA, CETMA

Presentation of technology or prototype (cockpit Utility Management system)

Autorzy: Gilles Saint-Aubin, Mathieu Fromage
Opublikowane w: 2023
Wydawca: ZAET
DOI: 10.5281/zenodo.10211233

E-Fan X hybrid project edges towards system integration

Autorzy: Cirium
Opublikowane w: 2020
Wydawca: FlightGlobal

Multi-flange RTM frames enable radical rear fuselage design

Autorzy: Ginger Gardiner
Opublikowane w: 2022
Wydawca: Composites World Magazine

The DRAGON Concept

Autorzy: C. Döll
Opublikowane w: 2020
Wydawca: CS2JU

NLR’s STUNNING project departs for next generation composite planes

Autorzy: anon.
Opublikowane w: 2021
Wydawca: NLR

SONACA active on making future transportation cleaner

Autorzy: Nicolas Dellisse
Opublikowane w: 2019
Wydawca: Sonaca

Dassault Aviation in flight with Clean Sky

Autorzy: Dassault Communication
Opublikowane w: 2018
Wydawca: Dassault
DOI: 10.5281/zenodo.4108388

ATN/IPS Airborne Router Demonstrator 2020 - Airbus & Honeywell

Autorzy: Enrique Mené López Michal Skořepa
Opublikowane w: 2021
Wydawca: Zenodo
DOI: 10.5281/zenodo.4438803

Cleansky 2 UBBICK Project

Autorzy: MAZO, Roberto; GUARINO, Olivia; ROBLIN, Nicolas
Opublikowane w: 2020
Wydawca: Aerospace Conference 2020
DOI: 10.5281/zenodo.4120807

The SFD, a new Scaled Research Aircraft

Autorzy: Leo Timmermans
Opublikowane w: 2022
Wydawca: NLR

ADVANCE Integrated final demonstration

Autorzy: Rainer Ludwigs
Opublikowane w: 2020
Wydawca: Bockfilm
DOI: 10.5281/zenodo.4010184

CANOBLE: New cockpits for reducing cabin noise

Autorzy: LPA
Opublikowane w: 2019
Wydawca: CSJU

Good vibrations: Quieter skies ahead with Clean Sky

Autorzy: Y. Revalor
Opublikowane w: 2021
Wydawca: Clean Sky Joint Undertaking
DOI: 10.5281/zenodo.7322836

Hot topic: Clean Sky's 'Environmentally friendly fire protection' system

Autorzy: Rainer Beuermann, Victor Norrefeldt
Opublikowane w: 2019
Wydawca: Clean Sky

Local Surface Toughening – Ein kleiner Streifen für die Klebung, ein großer Effekt für die Verbindungsfestigkeit!

Autorzy: Martin Schollerer
Opublikowane w: 2021
Wydawca: Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)

Moving forward on the Multifunctional Fuselage Demonstrator (MFFD)

Autorzy: Hannah Mason
Opublikowane w: 2020
Wydawca: CompositesWorld

Realisierung des Suction Rib-Funktionsdemonstrators

Autorzy: Bram van de Kamp
Opublikowane w: 2022
Wydawca: German Aerospace Center - Institute of Composite Structures and Adaptive Systems

Mission Flight Tests of Clean Aviation’s Scaled Flight Demonstrator

Autorzy: P.Iannelli, L. Timmermans, P. Schmollgruber et al.
Opublikowane w: 2022
Wydawca: CIRA

Digitalisiertes Tränkungszentrum fertigt erfolgreich “Suction Rib”

Autorzy: Bram van de Kamp, Mark Opitz, Markus Kleineberg
Opublikowane w: 2020
Wydawca: DLR

Power Sharing: Non-Propulsive Energy project investigates future aircraft architectures electric flight

Autorzy: CS2 JU journalist
Opublikowane w: 2020
Wydawca: CSJU

Virtual Tour through the FTF - Extended by the cargo bay

Autorzy: Victor Norrefeldt, Tanja Fleck
Opublikowane w: 2020
Wydawca: Fraunhofer

STUNNING | World’s largest known thermoplastic aircraft structure

Autorzy: NLRmedia
Opublikowane w: 2021
Wydawca: NLRmedia

SFD Scaled Flight Demonstrator Maiden flight 30 March 2022

Autorzy: NLRmedia
Opublikowane w: 2022
Wydawca: NLR

EU Clean Sky 2 Projekt HLFC: Funktionsdemonstration einer Laminarflügel-Komponente (Suction Rib)

Autorzy: Kleineberg, Markus
Opublikowane w: LightCon 2023, Numer 13th June 2023, 2023
Wydawca: Deutsche Messe (DLR, Institut für Systemleichtbau)

Developing a 4.0 solution for aeronautical manufacturing and assemblage processes based on state-of-the-art materialsDeveloping a 4.0 solution for aeronautical manufacturing and assemblage processes based on state-of-the-art materials

Autorzy: Eider Lezkano - Tekniker
Opublikowane w: 2020
Wydawca: Tekniker

HLFC-WIN Website

Autorzy: Projekt Team
Opublikowane w: 2019
Wydawca: HLFC-WIN

Presentation of technology or prototype (Crew oxygen protection)

Autorzy: Matthieu Fromage, Gilles Saint-Aubin
Opublikowane w: 2023
Wydawca: ZAET
DOI: 10.5281/zenodo.10211316

Clean Sky 2. Active Cockpit Ground Demonstrator

Autorzy: Aurbus DS, GUCV - Visual Content Dpt
Opublikowane w: 2020
Wydawca: CASA
DOI: 10.5281/zenodo.4139519

Techno Developments in CS2 (MATCOMP 2019)

Autorzy: M. A. Castillo
Opublikowane w: 2019
Wydawca: MATCOMP 2019
DOI: 10.5281/zenodo.3908193

Clean Aviation’s Scaled Flight Demonstrator completes its Mission Flight Tests

Autorzy: P. Iannelli, P. Schmollgruber, L. Timmermans et al.
Opublikowane w: 2022
Wydawca: CIRA

Bau und Vermessung einer laminaren Trennstelle von Flügelvorderkanten

Autorzy: Marco Krause, Martin Schollerer
Opublikowane w: 2021
Wydawca: German Aerospace Center (DLR)

fidamc_in-the-frame-of-cs2-large-passenger-aircraft-activity

Autorzy: K. Fernández, M. I. Martín, J. Cuenca
Opublikowane w: 2022
Wydawca: Linkedin

Easy Come, Easy Go: Clean Sky's NextGen Cabin streamlines assembly and reconfiguration

Autorzy: Lothar Kerschgens, Jimmy Tchen
Opublikowane w: 2020
Wydawca: CSJU

Integrated modular Avionics - IMA by GMV

Autorzy: José Neves
Opublikowane w: 2018
Wydawca: Farnborough International Air Show 2018
DOI: 10.5281/zenodo.6629085

Numerische Strukturuntersuchung einer laminaren Trennstelle Teil 1 – Modellerstellung

Autorzy: Marius Mantei, Martin Schollerer
Opublikowane w: 2021
Wydawca: German Aerospace Center (DLR)

ILA Goes digital« - Virtual Tour of Fraunhofer IBP Aviation Research Facilities

Autorzy: Victor Norrefeldt, Florian Mayer
Opublikowane w: 2020
Wydawca: ILA

What is a ‘hybrid-electric’ aircraft?

Autorzy: Riona Armesmith
Opublikowane w: 2019
Wydawca: The Telegraph 'STEM Awards 2020'

SMEs DRIVING INNOVATION FOR CLEAN AVIATION

Autorzy: Florent Liffran
Opublikowane w: 2020
Wydawca: CSJU

FRAMES : A new research project focused on thermoplastic manufacturing solutions for complex geometries.

Autorzy: Guillaume Fourage, Andreas Kolbe
Opublikowane w: 2020
Wydawca: ESTIA-Compositadour

Virtual manufacturing process for one shot composite structures

Autorzy: Federico Martin De La Escalera
Opublikowane w: 2021
Wydawca: University Carlos III of Madrid, Clean Sky 2, AERNNOVA

El centro tecnológico Aitiip se afianza en el sector aeronáutico

Autorzy: Luis H. Menéndez
Opublikowane w: 2020
Wydawca: Heraldo.es

INNOTOOL: Development of innovative smart 4.0 tooling set for the manufacturing and assembly of the Advanced Rear End product

Autorzy: Carlos Bello Larroche (AERNNOVA) / Alejandro Marqués Paola (AITIIP) / Gorka Kortaberria (TEKNIKER)
Opublikowane w: 2021
Wydawca: Metromeet

Heron - AITIIP is developing innovative RTM tooling, ALM system for sustainable aircraft wing

Autorzy: Chris Pasion
Opublikowane w: 2021
Wydawca: www.compositesworld.com

Manufacturing the upper half of the Multifunctional Fuselage Demonstrator (MFFD)

Autorzy: Ginger Gardiner
Opublikowane w: 2021
Wydawca: CompositesWorld

Desarrollo de una solución 4.0 para procesos de fabricación y montaje aeronáuticos basados en materiales de última generación

Autorzy: TEKNIKER
Opublikowane w: 2020
Wydawca: TEKNIKER

At the sharp end: The D3 Novel Business Jet Cockpit Technologies

Autorzy: FAVIER Mathieu
Opublikowane w: 2021
Wydawca: Clean Sky 2 JU
DOI: 10.5281/zenodo.5821291

Verbesserung durch Vereinfachung – Mit optimierter Struktur zum erfolgreichen Vogelschlagtest

Autorzy: Andreas Schröder
Opublikowane w: 2022
Wydawca: German Aerospace Center

CLEAN SKY 2 TECHNOLOGY PROGRESS – CONTRIBUTION TO THE ENVIRONMENTAL PERFORMANCE OF THE NEXT GENERATION OF AIRCRAFT

Autorzy: Dr Federico Martín de la Escalera Cutillas (Aernnova/Aerospace department at UC3M) Dr Miguel Angel Castillo Acero (Aernnova) Dr Rauno Cavallaro (Aerospace department at UC3M) Dr Andrea Cini (Aerospace department at UC3M)
Opublikowane w: 2021
Wydawca: Carlos III University

European Conference on Multifunctional StructuresEMuS 202017-18 November 2020

Autorzy: Johan Kos, Xavier Martinez, and Harmen Schippers
Opublikowane w: 2021
Wydawca: International Centre for Numerical Methods in Engineering (CIMNE)

Influence of Surface Irregularities on the Expected Boundary-Layer Transition Location on Hybrid Laminar Flow Control Wings

Autorzy: Juan Alberto Franco Sumariva; Alexander Theiss; Stefan Hein
Opublikowane w: New Results in Numerical and Experimental Fluid Mechanics XIII, Numer 151, 2021, Strona(/y) 174-184, ISBN 978-3-030-79561-0
Wydawca: Springer, Cham
DOI: 10.1007/978-3-030-79561-0_17

Voice Control in a Real Flight Deck Environment

Autorzy: Michal Trzos, Martin Dostl, Petra Machkov, Jana Eitlerov
Opublikowane w: Text, Speech, and Dialogue - 21st International Conference, TSD 2018, Brno, Czech Republic, September 11-14, 2018, Proceedings, Numer 11107, 2018, Strona(/y) 388-402, ISBN 978-3-030-00793-5
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-030-00794-2_42

Automated Assembly of Thermoplastic Fuselage Structures for Future Aircrafts

Autorzy: Simon Kothe, Benjamin Diehl
Opublikowane w: 2020, ISBN 978-3-662-62138-7
Wydawca: Springer
DOI: 10.1007/978-3-662-62138-7_47

The Effect of 2-D Surface Irregularities on Laminar-Turbulent Transition: A Comparison of Numerical Methodologies

Autorzy: Francesco Tocci; Juan Alberto Franco; Stefan Hein; Guillaume Chauvat; Ardeshir Hanifi
Opublikowane w: New Results in Numerical and Experimental Fluid Mechanics XIII, Numer 151, 2021, Strona(/y) 246-256, ISBN 978-3-030-79561-0
Wydawca: Springer, Cham
DOI: 10.1007/978-3-030-79561-0_24

DLR Feasibility Study of HLFC Wing Designs for S1MA Wind Tunnel Test

Autorzy: Thomas Streit; Heiko Geyr von Schweppenburg; David Cruz; Rafael Sanchez
Opublikowane w: New Results in Numerical and Experimental Fluid Mechanics XIII, Numer 151, 2021, Strona(/y) 235-245, ISBN 978-3-030-79561-0
Wydawca: Springer, Cham
DOI: 10.1007/978-3-030-79561-0_23

A Procedure to Estimate the Size of a Suction Flap for a Passive HLFC System

Autorzy: Geza Schrauf
Opublikowane w: New Results in Numerical and Experimental Fluid Mechanics XII, Numer 151, 2021, Strona(/y) 215-223, ISBN 978-3-030-79561-0
Wydawca: Springer, Cham
DOI: 10.1007/978-3-030-79561-0_21

Fabricación de rigidizadores mediante conformado en prensa de material compuesto de matriz termoplástica de altas prestaciones para integración en estructuras típicas de fuselaje

Autorzy: Sabela González Seijas (Author), Alberto Jiménez Suárez (Supervisior)
Opublikowane w: 2020
Wydawca: Universidad Rey Juan Carlos, FIDAMC

Hybrid-Electric Aircraft with Over-the-Wing Distributed Propulsion

Autorzy: Reynard de Vries
Opublikowane w: 2022, ISBN 978-94-6384-287-7
Wydawca: Delft University of Technology
DOI: 10.4233/uuid:ef87dc11-e7b2-4726-a41f-28588d64c58d

Unconventional Propeller−Airframe Integration for Transport Aircraft Configurations

Autorzy: Nando van Arnhem
Opublikowane w: 2022, ISBN 978-94-6384-304-1
Wydawca: Delft University of Technology
DOI: 10.4233/uuid:4d47b0db-1e6a-4f38-af95-aafd33c29402

Integration of Non-Probabilistic Uncertainty Quantification Methods for the Life-Cycle-Cost-Benefit Analysis of Hybrid Laminar Flow Control

Autorzy: Bernhardt, Niklas
Opublikowane w: 2022
Wydawca: DLR TUHH

Boundary-layer instability on rotating cones

Autorzy: Tambe, S.S.
Opublikowane w: 2022
Wydawca: Delft University of Technology
DOI: 10.4233/uuid:40ed5b16-bf5a-409e-a28e-74f115f984cf

Similitude augmentation in sub-scale flight test model design

Autorzy: Akshay Raju Kulkarni
Opublikowane w: 2022
Wydawca: Delft University of Technology
DOI: 10.4233/uuid:6f0eaa80-e52e-4a03-b92b-cae847f12906

Analysis of thermoplastic composites and conduction welded joints

Autorzy: B.H.A.H. Tijs (GKN Fokker-TUD) A. Turon (University of Girona) C. Bisagnic (TUD)
Opublikowane w: 2023, ISBN 978-94-6473-101-9
Wydawca: TU Delft
DOI: 10.4233/uuid:dd3bff55-b684-47cc-96f3-6ff109d345a0

Numerische Strukturuntersuchung einer laminaren Trennstelle Teil 2 – Berechnung und Auswertung

Autorzy: Marius Mantei, Martin Schollerer
Opublikowane w: 2021
Wydawca: German Aerospace Center (DLR)

Ermittlung und Validierung der Prozessgrößen beim elektrischen Widerstandsschweißen von faserverstärkten Hochleistungsthermoplasten und deren Einfluss auf die Verbindungsqualität

Autorzy: Thomè, Anton; Endraß, Manuel
Opublikowane w: 2021
Wydawca: DLR

Prawa własności intelektualnej

AIR GASPER WITH INTEGRATED FAN

Numer wniosku/publikacji: 20 20000267
Data: 2020-04-10

Verfahren zum Einbau einer Innenausbaukomponente eines Flugzeugs, Innenausbaukomponente für ein Flugzeug und System zur Montage von Innenausbaukomponenten

Numer wniosku/publikacji: 10 2018121623
Data: 2018-09-05

CONNECTING DEVICE AND FASTENING SYSTEM FOR FIXING A CABIN FIXTURE DEVICE OF A CABIN OF AN AIRCRAFT TO A FASTENING RAIL

Numer wniosku/publikacji: 20 151383
Data: 2020-01-13

FIXING SYSTEM FOR FIXING INSTALLATION ELEMENTS IN A CABIN OF A VEHICLE

Numer wniosku/publikacji: 19 168296
Data: 2019-04-10

Befestigungssystem zum Sichern von Bauteilen

Numer wniosku/publikacji: 10 2018104360
Data: 2018-02-27

OXYGEN GENERATOR OUTLET MANIFOLD WITH IMPROVED THERMIC PROPERTIES

Numer wniosku/publikacji: 20 154175
Data: 2020-01-28

Verfahren zum Installieren von Systemkomponenten in einem Abschnitt eines Flugzeugrumpfs

Numer wniosku/publikacji: 10 2018123531
Data: 2018-09-25

Verfahren und Verbindung zum Fügen zweier Bauelemente

Numer wniosku/publikacji: 10 2017103895
Data: 2017-02-24

TOLERANCE COMPENSATION SUBASSEMBLY, AIRCRAFT COMPONENT PROVIDED THEREWITH AND AIRCRAFT

Numer wniosku/publikacji: 20 171124
Data: 2020-04-23

Befestigungssystem zum Befestigen von Einbauten an einer Schiene in einem Fahrzeug

Numer wniosku/publikacji: 10 2018103514
Data: 2018-02-16

Installationssystem für eine Kabine eines Fahrzeugs

Numer wniosku/publikacji: 10 2019109573
Data: 2019-04-11

OXYGEN MASK ASSEMBLY WITH OPTIMIZED PACKAGE SIZE

Numer wniosku/publikacji: 19 188417
Data: 2019-07-25
Wnioskodawca/wnioskodawcy: SAFRAN CABIN GERMANY GMBH

Bauteil, dessen Verwendung und Verfahren zum Verbinden eines Bauteils

Numer wniosku/publikacji: 10 2017127009
Data: 2017-11-16

PASSENGER SERVICE UNIT WITH COVER

Numer wniosku/publikacji: 20 158269
Data: 2020-02-19

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Prawa własności intelektualnej

Udostępnij tę stronę

Pobierz