Leistungen
KIT will analyse every new material with respect to the printing results by VSI Especially important will be to define a relation between laser pulse energy and layer thickness of printed material spots Especially we want to find out if indeed the thickness of transferred layers depends on the laser pulse energy or on repeated material transfers onto the same spot
nano3D printer with robot arm functioning for routine printingThe nano3D printer from deliverable D1.1 will be validated by synthesizing arrays of fluorescent molecules.
Donor slides made of > 5 different nanoparticlesIn order to provide a hydrophobic shell optionally also for covalently coupling to the surface Lurederra will functionalize nanoparticles Pure organic shells will be used based on organic materials such as oleic acid or polymeric shells For that it is possible to address in two different ways to directly functionalise the nanoparticles in the final DCM solvent or selecting suitable solvents for the functionalisation then recovering the hydrophobic powder and redispersing in the DCM and carrier solution eg SLEC 7552 They will determine the particle size distribution by means of Zsizer and address the grade of hydrophobicity reached Particles are sent to KIT From there they get feedback if these particles can be used for nano3D printing If not TEC and Lurederra will modify the synthesis and functionalisation parameters in order to adjust the properties size and hydrophobicity and will send optimised samples to KITNext KIT will formulate 5 different nanoparticles from TEC and Lurederra into donor slides and transfer them to an acceptor slide
Peptide arrays manufactured with nano3D printer commercializedAs soon as the nano3D printer is available PPP will start to manufacture veryhigh density peptide arrays not funded within the NANOSTACKS proposal and sell these to its customers Money from these sales will be used to further advance the nano3D printer which will be constantly done until the end of the project
Duplicated nano3D printerSupported by KIT, PPP will duplicate nano3D printer that is shown in Fig. 3. We will re-design the automated loading procedure to speed up the whole process. This will be done with cupping vessels that transport the next donor slide from a parking position to the lasing position, and, at the same time, remove the previous donor slide. A robot arm will then replenish the parking position with another donor slide, while at the same time material transfer is done with the active donor slide.
Reaction chamber for sintering / coupling at defined temperatures availableManufacturing and testing of a set of gas-tight chambers that will be used to incubate acceptor glass slides with printed nanolayers in a defined atmosphere. Optionally, some of these gas-tight chambers should withstand very high temperature (360°C). We will test this point - might be we don't need that high temperatures.
Donor slides made of > 5 different commercially available chemicalsKIT will formulate >5 different organic materials into donor slides and transfer tehm with the help of the nano3D printer onto an acceptor slide.
NANOSTACKS website with the domain name wwwNANOSTACKSeu The website will give links to partners ofthe NANOSTACKS project give an idea what we plan to do and gradually from 2023 on will inform visitors aboutpatents and publications that have been generated
Veröffentlichungen
Autoren:
Grigori Paris, Dominik Bierbaum, Michael Paris, Dario Mager and Felix F. Loeffler
Veröffentlicht in:
Applied Sciences-Basel, Ausgabe Appl. Sci. 2022, 12(3), 1361, 2022, Seite(n) 1361, ISSN 2076-3417
Herausgeber:
Multidisciplinary Digital Publishing Institute
DOI:
10.3390/app12031361
Autoren:
Paris, G (Paris, Grigori) [1] , [2] ; Heidepriem, J (Heidepriem, Jasmin) [1] , [3] ; Tsouka, A (Tsouka, Alexandra) [1] , [3] ; Liu, YX (Liu, Yuxin) [1] , [3] ; Mattes, DS (Mattes, Daniela S.) [4] ; Martin, SP (Pinzon Martin, Sandra) [1] , [3] ; Dallabernardina, P (Dallabernardina, Pietro) [1] ; Mende, M (Mende, Marco) [1] ; Lindner, C (Lindner, Celina) [1] ; Wawrzinek, R (Wawrzinek, Robert) [1] ;
Veröffentlicht in:
Advanced Materials, Ausgabe Volume34, Ausgabe23 June 9, 2022 2200359, 2022, Seite(n) 2200359 (1-12), ISSN 1521-4095
Herausgeber:
Wiley
DOI:
10.1002/adma.202200359
Autoren:
Stephan Eickelmann, Sanghwa Moon, Yuxin Liu, Benjamin Bitterer, Sebastian Ronneberger, Dominik Bierbaum, Frank Breitling, and Felix F. Loeffler*
Veröffentlicht in:
Langmuir, Ausgabe Langmuir 2022, 38, 7, 2220–2226, 2022, Seite(n) 2220–2226, ISSN 0743-7463
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.langmuir.1c02724
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor