Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

European Activity for Standardization of Industrial residual STRESS characterization

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Best practice guidelines (se abrirá en una nueva ventana)

Concerning WP2 task 2.2Development of best practice in correlation of modeled and measured stress data. This includes details to consider during modelling and experiments and reporting formats.

Report on residual stress characterisation, AM (se abrirá en una nueva ventana)

Concerning WP6 task 6.2Report on using residual stress characterization options for quality assessment of 3D printet metal components. It will be used as a basis for discussions with non-partner stakeholders.

Report on ontologies and complex workflows (se abrirá en una nueva ventana)

Concerning WP3 task 3.6A report highlighting the common rationales used to define the main parameters and descriptors of the protocols developed for all techniques. This will ensure consistent instrument characterization and defines the metadata that is necessary for WP4.

Output data report (se abrirá en una nueva ventana)

Concerning WP5 task 5.1Report on output format compatible with simulation software.

Technical report with mathematical formalisms (se abrirá en una nueva ventana)

Concerning WP4 task 4.2A technical report with the mathematical formalisms (equations), dedicated technical drawings and diagrams that describes coordinate systems, variables, workflows for data processing, and that includes the description of the experimental parameters to be included in FE-modelling software.

Industrial service guidelines (se abrirá en una nueva ventana)

Concerning WP5 task 5.5Final version of industrial service guidelines published.

Report on technical specifications (se abrirá en una nueva ventana)

Concerning WP3 task 3.1A report on technical specifications as identified in collaboration with the industrial users and at the interface with WP2, WP4, and WP5.

Round robin results (se abrirá en una nueva ventana)

Concerning WP2 task 2.3The full measurement results of the round robin samples and their comparisons are available. This includes results both from the (semi)destructive and non destructive laboratory techniques and large scale techniques and a comprehensive benchmark report comparing the different techniques.

Report on final cross-validation (se abrirá en una nueva ventana)

Concerning WP4 task 4.4Report on final cross-validation of protocols and software.

Strategic report, novel techniques (se abrirá en una nueva ventana)

Concerning WP3 task 3.4Strategic report on future perspectives and action plan to mature novel techniques.

Report on SOPs (se abrirá en una nueva ventana)

Concerning WP3 task 3.2 and task 3.3Report on SOPs for instruments dedicated to bulk analysis and to near surface analysis.

Software for on-line data analysis (se abrirá en una nueva ventana)

Concerning WP4 task 4.3Software for on-line data analysis developed

Reference samples (se abrirá en una nueva ventana)

Concerning WP2 task 2.1Reference samples with industrial relevance are designed and details on their manufacture are available.

Publicaciones

D4.3 Software for on-line data analysis

Autores: Arnold Paecklar Thilo Pirling Tamás Szabolics Márton Markó
Publicado en: 2023
Editor: EU Horizon 2020 project EASI-STRESS

D3.1 Towards technical specification requirements and user advisory protocols

Autores: Matthew Roy Ranggi S. Ramadhan Hanna Leemreize Ennio Capria Kousika D. Rajendran Philip Withers
Publicado en: 2021
Editor: EU Horizon 2020 project EAsI-STRESS

D3.4 Ontologies and Complex Workflows

Autores: Sandra Cabeza Caroline Boudou David Canelo Yubero Ennio Capria Mohamed Fares Slim Hanna Leemreize Juan Manuel Martinez Marko Marton Arnold Paecklar Thilo Pirling Kousika Rajendran Simon Robbe Matthew Roy Peter Staron
Publicado en: 2022
Editor: EU Horizon 2020 project EASI-STRESS

D2.2 Best practice guidelines

Autores: Matthew Roy David Canelo Yubero Manuel Sanchez Poncela Romain Badyka Wen Cui Ranggi Sahmura Ramadhan Mohamed Fares Slim Hanna Leemreize
Publicado en: 2022
Editor: EU Horizon 2020 project EASI-STRESS

D3.2 Report on SOPs for instruments dedicated to bulk analysis and to near-surface analysis

Autores: Mohamed Fares Slim David Canelo-Yubero Sandra Cabeza Arnold Paecklar Thilo Pirling Thomas Buslaps Peter Staron Andrea Francesco Ciuffini Guilherme Abreu Faria Márton Markó Gyula Török
Publicado en: 2023
Editor: EU Horizon 2020 project EASI-STRESS

D5.1 Output data report

Autores: Vincent Robin
Publicado en: 2021
Editor: EU Horizon 2020 project EASI-STRESS

D4.2 Technical report with mathematical formalisms (equations), dedicated technical drawings and diagrams that describes coordinate systems, variables, workflows for data processing, and that includes the description of the experimental parameters to be included in FE-modelling software

Autores: Arnold Paecklar Thilo Pirling Ranggi Ramadan Mohamed Fahres Slim Sandra Cabeza David Canelo Yubero Peter Staron Márton Markó Matthew Roy Veijo Honkimaki Hanna Leemreize Fabien Lefebvre Eric Usmial
Publicado en: 2022
Editor: EU Horizon 2020 project EASI-STRESS

D2.3 Round-robin results

Autores: Matthew Roy David Canelo Yubero Sandra Cabeza Thilo Pirling Arnold Paecklar Peter Staron Romain Badyka Simon Robbe Hanna Leemreize Wen Cui Philipp Mayr Manuel Sanchez Poncela Romain Badyka Ranggi Sahmura Ramadhan Mohamed Fares Slim
Publicado en: 2023
Editor: EU Horizon 2020 project EASI-STRESS

D2.1 Reference samples

Autores: Matthew Roy Manuel Sánchez Poncela Romain Badyka Philipp Mayr
Publicado en: 2021
Editor: EU Horizon 2020 project EASI-STRESS

D6.3 Report on residual stress characterisation, AM

Autores: Eric Baustert Manuel Sánchez Poncela Fabien Lefebvre Nikolaj Zangenberg
Publicado en: 2023
Editor: EU Horizon 2020 project EASI-STRESS

Residual Stress Determination of Cast Aluminium Benchmark Components Using Strain Relief Techniques (se abrirá en una nueva ventana)

Autores: Z. Cai, P. Mayr, R. Fernandez, S. Robbe, E. Usmial, F. Lefebvre, L. To, G. S. Schajer, P. J. Withers, M. J. Roy
Publicado en: Experimental Mechanics, Edición 64, 2024, Página(s) 441-452, ISSN 0014-4851
Editor: Sage Science Press
DOI: 10.1007/s11340-024-01033-5

EASI-STRESS standardization of industrial residual stress measurement: benchmark specimen design

Autores: Wen Cui, University of Manchester Manuel Sánchez Poncela, ArcelorMittal Innovación Investigación e Inversión, S.L.U. Residencia la Granda, s/n – 44318, La Granda, Gozón, Asturias Romain Badyka, EDF Lab Les Renardières, MMC Department, Av. des Renardières, F-77250 Moret sur Loing Philipp Mayr, Nemak Linz GmbH Philip J Withers, University of Manchester Matthew J Roy, University of Mancheste
Publicado en: Proceedings: ICRS11 – 11th International Conference on Residual Stresses - Nancy – France, Edición 27-30th March 2022, 2023
Editor: HAL science ouverte

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles

Mi folleto 0 0