European Activity for Standardization of Industrial residual STRESS characterization

Informazioni relative al progetto

EASI-STRESS

ID dell’accordo di sovvenzione: 953219

DOI

10.3030/953219

Progetto chiuso

Data della firma CE 2 Dicembre 2020

Data di avvio 1 Gennaio 2021

Data di completamento 30 Giugno 2024

Finanziato da

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Costo totale

€ 4 739 735,01

Contributo UE

€ 4 739 672,50

Coordinato da

TEKNOLOGISK INSTITUT
Denmark

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (11)

Best practice guidelines

Concerning WP2 task 2.2Development of best practice in correlation of modeled and measured stress data. This includes details to consider during modelling and experiments and reporting formats.

Report on residual stress characterisation, AM

Concerning WP6 task 6.2Report on using residual stress characterization options for quality assessment of 3D printet metal components. It will be used as a basis for discussions with non-partner stakeholders.

Report on ontologies and complex workflows

Concerning WP3 task 3.6A report highlighting the common rationales used to define the main parameters and descriptors of the protocols developed for all techniques. This will ensure consistent instrument characterization and defines the metadata that is necessary for WP4.

Output data report

Concerning WP5 task 5.1Report on output format compatible with simulation software.

Technical report with mathematical formalisms

Concerning WP4 task 4.2A technical report with the mathematical formalisms (equations), dedicated technical drawings and diagrams that describes coordinate systems, variables, workflows for data processing, and that includes the description of the experimental parameters to be included in FE-modelling software.

Industrial service guidelines

Concerning WP5 task 5.5Final version of industrial service guidelines published.

Report on technical specifications

Concerning WP3 task 3.1A report on technical specifications as identified in collaboration with the industrial users and at the interface with WP2, WP4, and WP5.

Round robin results

Concerning WP2 task 2.3The full measurement results of the round robin samples and their comparisons are available. This includes results both from the (semi)destructive and non destructive laboratory techniques and large scale techniques and a comprehensive benchmark report comparing the different techniques.

Report on final cross-validation

Concerning WP4 task 4.4Report on final cross-validation of protocols and software.

Strategic report, novel techniques

Concerning WP3 task 3.4Strategic report on future perspectives and action plan to mature novel techniques.

Report on SOPs

Concerning WP3 task 3.2 and task 3.3Report on SOPs for instruments dedicated to bulk analysis and to near surface analysis.

Websites, patent fillings, videos etc. (1)

Project website on-line

Concerning WP7 task 7.1Project website on-line

Other (1)

Software for on-line data analysis

Concerning WP4 task 4.3Software for on-line data analysis developed

Demonstrators, pilots, prototypes (1)

Reference samples

Concerning WP2 task 2.1Reference samples with industrial relevance are designed and details on their manufacture are available.

Pubblicazioni

Other (10)

D4.3 Software for on-line data analysis

Autori: Arnold Paecklar Thilo Pirling Tamás Szabolics Márton Markó
Pubblicato in: 2023
Editore: EU Horizon 2020 project EASI-STRESS

D3.1 Towards technical specification requirements and user advisory protocols

Autori: Matthew Roy Ranggi S. Ramadhan Hanna Leemreize Ennio Capria Kousika D. Rajendran Philip Withers
Pubblicato in: 2021
Editore: EU Horizon 2020 project EAsI-STRESS

D3.4 Ontologies and Complex Workflows

Autori: Sandra Cabeza Caroline Boudou David Canelo Yubero Ennio Capria Mohamed Fares Slim Hanna Leemreize Juan Manuel Martinez Marko Marton Arnold Paecklar Thilo Pirling Kousika Rajendran Simon Robbe Matthew Roy Peter Staron
Pubblicato in: 2022
Editore: EU Horizon 2020 project EASI-STRESS

D2.2 Best practice guidelines

Autori: Matthew Roy David Canelo Yubero Manuel Sanchez Poncela Romain Badyka Wen Cui Ranggi Sahmura Ramadhan Mohamed Fares Slim Hanna Leemreize
Pubblicato in: 2022
Editore: EU Horizon 2020 project EASI-STRESS

D3.2 Report on SOPs for instruments dedicated to bulk analysis and to near-surface analysis

Autori: Mohamed Fares Slim David Canelo-Yubero Sandra Cabeza Arnold Paecklar Thilo Pirling Thomas Buslaps Peter Staron Andrea Francesco Ciuffini Guilherme Abreu Faria Márton Markó Gyula Török
Pubblicato in: 2023
Editore: EU Horizon 2020 project EASI-STRESS

D5.1 Output data report

Autori: Vincent Robin
Pubblicato in: 2021
Editore: EU Horizon 2020 project EASI-STRESS

D4.2 Technical report with mathematical formalisms (equations), dedicated technical drawings and diagrams that describes coordinate systems, variables, workflows for data processing, and that includes the description of the experimental parameters to be included in FE-modelling software

Autori: Arnold Paecklar Thilo Pirling Ranggi Ramadan Mohamed Fahres Slim Sandra Cabeza David Canelo Yubero Peter Staron Márton Markó Matthew Roy Veijo Honkimaki Hanna Leemreize Fabien Lefebvre Eric Usmial
Pubblicato in: 2022
Editore: EU Horizon 2020 project EASI-STRESS

D2.3 Round-robin results

Autori: Matthew Roy David Canelo Yubero Sandra Cabeza Thilo Pirling Arnold Paecklar Peter Staron Romain Badyka Simon Robbe Hanna Leemreize Wen Cui Philipp Mayr Manuel Sanchez Poncela Romain Badyka Ranggi Sahmura Ramadhan Mohamed Fares Slim
Pubblicato in: 2023
Editore: EU Horizon 2020 project EASI-STRESS

D2.1 Reference samples

Autori: Matthew Roy Manuel Sánchez Poncela Romain Badyka Philipp Mayr
Pubblicato in: 2021
Editore: EU Horizon 2020 project EASI-STRESS

D6.3 Report on residual stress characterisation, AM

Autori: Eric Baustert Manuel Sánchez Poncela Fabien Lefebvre Nikolaj Zangenberg
Pubblicato in: 2023
Editore: EU Horizon 2020 project EASI-STRESS

Peer reviewed articles (1)

Residual Stress Determination of Cast Aluminium Benchmark Components Using Strain Relief Techniques

Autori: Z. Cai, P. Mayr, R. Fernandez, S. Robbe, E. Usmial, F. Lefebvre, L. To, G. S. Schajer, P. J. Withers, M. J. Roy
Pubblicato in: Experimental Mechanics, Numero 64, 2024, Pagina/e 441-452, ISSN 0014-4851
Editore: Sage Science Press
DOI: 10.1007/s11340-024-01033-5

Conference proceedings (1)

EASI-STRESS standardization of industrial residual stress measurement: benchmark specimen design

Autori: Wen Cui, University of Manchester Manuel Sánchez Poncela, ArcelorMittal Innovación Investigación e Inversión, S.L.U. Residencia la Granda, s/n – 44318, La Granda, Gozón, Asturias Romain Badyka, EDF Lab Les Renardières, MMC Department, Av. des Renardières, F-77250 Moret sur Loing Philipp Mayr, Nemak Linz GmbH Philip J Withers, University of Manchester Matthew J Roy, University of Mancheste
Pubblicato in: Proceedings: ICRS11 – 11th International Conference on Residual Stresses - Nancy – France, Numero 27-30th March 2022, 2023
Editore: HAL science ouverte