MANUFACTURING AND ASSEMBLY OF MODULAR AND REUSABLE EV BATTERY FOR ENVIRONMENT-FRIENDLY AND LIGHTWEIGHT MOBILITY

Informazioni relative al progetto

MARBEL

ID dell’accordo di sovvenzione: 963540

DOI

10.3030/963540

Progetto chiuso

Data della firma CE 12 Novembre 2020

Data di avvio 1 Gennaio 2021

Data di completamento 31 Marzo 2025

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale

€ 11 703 385,00

Contributo UE

€ 9 888 796,39

Coordinato da

FUNDACIO EURECAT
Spain

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (8)

Safety guideline

This report will synthetise the safety guidelines regarding cells and batteries. Linked to task 2.2.

Recycling and ecodesign guidelines

Report on battery design based on both technical and environmental aspects. Linked to Task 2.5.

Second use guideline

Report on guidelines and strategy for circular economy approach regarding second use and dismantling activities. Linked to task 2.4.

Battery Pack Functional Requirements

This report will synthetise the functional guidelines and KPIs to be considered in the project. Linked to task 2.1.

Functional Safety

This report will synthetise the functional safety analysis. Linked to task 4.2.

Cell characterization and combination with thermal management system technology

Electrochemical and thermal cell characterization including testing and modelling and development of two different cooling system designs. Linked to task 3.1.

Modularity and dismantling guideline

Report on modularity and dismantling guide. Linked to Task 2.3.

Project communication and dissemination plan

Internal Manual with detailed instructions and templates for the dissemination and communicating activities. Linked to task 9.1, 9.3, 9.4.

Demonstrators, pilots, prototypes (1)

Electrical system [DC-box and HV junction box] and UFC Verification results

DC-Box and HV Junction box demonstrators for being integrated into the battery pack and Report on the verification results. Linked to task 3.3.

Open Research Data Pilot (1)

Data management plan (DMP)

This report will set the data management with type ORDP, as MARBEL opts-in on open access to research data. Linked to task 1.3.

Pubblicazioni

Peer reviewed articles (2)

A through-process modelling approach of aluminium heat-affected zone softening and weld joint performance

Autori: Ivan Bunaziv, Asle Joachim Tomstad, Geir Kvam-Langelandsvik, Magnus Eriksson
Pubblicato in: The International Journal of Advanced Manufacturing Technology, Numero 137, 2025, Pagina/e 4011-4022, ISSN 0268-3768
Editore: Springer Verlag
DOI: 10.1007/s00170-025-15395-0

Procedure for Assessing the Suitability of Battery Second Life Applications after EV First Life

Autori: Tomás Montes, Maite Etxandi-Santolaya, Josh Eichman, Victor José Ferreira, Lluís Trilla, Cristina Corchero
Pubblicato in: Batteries, Numero 8, 2024, Pagina/e 122, ISSN 2313-0105
Editore: MDPI AG
DOI: 10.3390/batteries8090122

Conference proceedings (10)

Future Material Developments for Electric Vehicle Battery Cells Answering Growing Demands from an End-User Perspective

Autori: Annika Ahlberg Tidblad; Kristina Edström; Guiomar Hernández; Iratxe de Meatza; Imanol Landa-Medrano; Jordi Jacas Biendicho; Lluís Trilla; Maarten Buysse; Marcos Ierides; Beatriz Perez Horno; Yash Kotak; Hans-Georg Schweiger; Daniel Koch; Bhavya Satishbhai Kotak
Pubblicato in: Energies - Special Numero High-Capacity Cells and Batteries for Electric Vehicles, Numero 15, 2021, Pagina/e Energies, Vol 14, Iss 4223, p 4223 (2021)
Editore: MDPI
DOI: 10.3390/en14144223

Α Machine Learning Framework for Li-Ion Battery Lifetime Prognostics

Autori: Afroditi Fouka, Alexandros Bousdekis, Katerina Lepenioti, Gregoris Mentzas
Pubblicato in: 2022, ISBN 978-1-6654-6390-4
Editore: IEEE Xplore
DOI: 10.1109/iisa56318.2022.9904407

End of electric vehicle batteries: reuse vs. recycle

Autori: Yash Kotak; Carlos Marchante Fernández; Lluc Canals Casals; Bhavya Satishbhai Kotak; Daniel Koch; Christian Geisbauer; Lluís Trilla; Alberto Gómez-Núñez; Hans-Georg Schweiger
Pubblicato in: Energies - Special Numero High-Capacity Cells and Batteries for Electric Vehicles, Numero 16, 2021, Pagina/e Energies, Vol 14, Iss 2217, p 2217 (2021)
Editore: MDPI
DOI: 10.3390/en14082217

Authentic Batteries: A Concept for a Battery Pass Based on PUF-enabled Certificates

Autori: Blümke, Julian; Hof, Hans-Joachim
Pubblicato in: 16. International Conference on Emerging Security Information, Systems and Technologies (SECURWARE'22), Numero 10, 2022, Pagina/e 76-81, ISBN 978-1-68558-007-0
Editore: George Yee
DOI: 10.5281/zenodo.7457486

Unified approach of the environmental and economic assessment for EVs Li-ion batteries on a circular economy perspective

Autori: M. Violeta Vargas-Parra; Benveniste, Gabriela; Gallart, José Jorge Espí; Sánchez, Anna; Ferreira, Víctor José; Montes, Tomás; Clarens, Frederic; Corchero, Cristina
Pubblicato in: Numero 10, 2022
Editore: Zenodo
DOI: 10.5281/zenodo.7457520

An Analysis of Security Concerns in Transitioning Battery Management Systems from First to Second Life

Autori: Julian Blümke, Kevin Mayer, Hans-Joachim Hof
Pubblicato in: Proceedings of the 19th International Conference on Availability, Reliability and Security, 2025, Pagina/e 1-11
Editore: ACM
DOI: 10.1145/3664476.3671010

Manufacturing and assembly of modular and reusable EV battery for environment-friendly and lightweight mobility

Autori: Robert Albrecht, Sándor Eichinger, Joaquim Guitart Corominas, Aitor Bazan Escoda, Alberto Gómez Núñez, Eduard Piqueras Jover
Pubblicato in: 2024
Editore: TRA 2024

Li-Ionen-Zellswelling – Ursachen, Möglichkeiten zur experimentellen Untersuchung sowie praktische Beispiele der Untersuchung auf Zell- und Modulebene

Autori: D. Koch, S. Diel, H.-G. Schweiger
Pubblicato in: 2024
Editore: DVM-Workshop „Brennstoffzelle, Batterie, elektrischer Antrieb – Anforderungen und Absicherung“

Modelling Data-Driven Digital Twins of EV Batteries for Predictive Analytics

Autori: Fouka, Afroditi; Bousdekis, Alexandros; Lepenioti, Katerina; Mentzas, Gregoris
Pubblicato in: 14th International Conference on Information, Intelligence, Systems and Applications (IISA2023), Numero 2, 2023
Editore: Research Gate
DOI: 10.1109/iisa59645.2023.10345850

State of Charge Prediction of EV Li-ion Batteries with Machine Learning: A Comparative Analysis

Autori: Afroditi Fouka, Alexandros Bousdekis, Katerina Lepenioti, Gregoris Mentzas
Pubblicato in: Proceedings of the 13th Hellenic Conference on Artificial Intelligence, 2025, Pagina/e 1-7
Editore: ACM
DOI: 10.1145/3688671.3688776

Book chapters (1)

Manufacturing and Assembly of Modular and Reusable EV Battery for Environment-Friendly and Lightweight Mobility

Autori: Robert Albrecht, Sándor Eichinger, Joaquim Guitart Corominas, Aitor Bazan Escoda, Matteo Villa, Antonio Canfolanieri, Alberto Gómez Núñez, Eduard Piqueras Jover
Pubblicato in: Lecture Notes in Mobility, Transport Transitions: Advancing Sustainable and Inclusive Mobility, 2025, Pagina/e 261-267
Editore: Springer Nature Switzerland
DOI: 10.1007/978-3-031-89444-2_37

Diritti di proprietà intellettuale

Patent (1)

METHOD FOR DISMANTLING A LITHIUM BATTERY

Numero candidatura/pubblicazione: 20 23066341
Data: 2023-06-18
Candidato/i: TES SUSTAINABLE BATTERY SOLUTION FRANCE