Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-04-19

OPTIMIZATION OF THE ROTARY KILN OPERATION IN THE PRODUCTION OF FE-NI

Ziel


The operation of the rotary kiln with the Fuzzy Logic System was checked for a period of three months. All the required modifications and improvements of the expert system including the final set-up of the control strategies was performed, the first three (3) weeks of the evaluation period.

Operational results from the Fuzzy Logic System during the evaluating period indicate the following improvements:

- Fuel savings approximately 3,5%
- Up to 9% increase in the average hourly production rate
- Uniform and higher prereduction degree of lateritic ore by 2%
- Stable kiln operation
- Reduced emission to the environment due to the reduction of fuel consumption
- Higher run factor for the kiln (approximately 90%)
- Lower electric energy consumption in the electric furnaces through the higher prereduction degree of the lateritic ore.

According to some estimations the stable operation of the rotary kiln No. 4 and all the above mentioned improvements result in a 4% reduction of the total production cost.
An expert system will be developed for the control and optimization of the rotary kiln pre-heating and pre-reduction operations. This expert system will automize the operation of the rotary kilns used for metallurgical processing of the laterite ores. This is a novel application of expert systems due to reactions taking place in the kiln and the difficulty and importance of controlling kilns reducing atmosphere. It is expected that a more environmentally friendly rotary kiln operation will be achieved due to kilns optimization.

The main research tasks are:

i) Definition and reporting of all production parameters of the preheating kiln,

ii- development of the relationships between these production parameters,

iii) development of an expert system which easily achieve the optimum preheating kiln operating conditions,

iv) successful completion will increase productivity by 5% and will decrease fuels consumption by 5%.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

CSC - Cost-sharing contracts

Koordinator

GM & MAS LARCO
EU-Beitrag
Keine Daten
Adresse
AMALIAS AVENUE, 20
10557 ATHENS
Griechenland

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (2)

Mein Booklet 0 0