Obiettivo
An extensive study of the properties of powder metallurgy Al-Si alloys was carried out. The effect of atomization parameters on the power properties, such as their compressibility, were highlighted. We studied the relation between processing parameters as lubrication route (wax addition or die wall lubrication), dewaxing, preheating and forging temperature, which contributed to optimizing the densification parameters for this kind of alloys and powder characteristics. Mechanical properties were determined by tensile and fatigue testing. The results obtained are consistent with other published research work. Unfortunately, we obtained lower values for fatigue tests than expected, due to an unwanted contamination of the original powders by pure Al particles decreasing the fatigue properties. Furthermore, we can note the low toughness of these materials, which has to be accounted (7.0 Mpa m) for while designing structural parts as con-rods. An interesting result concerns the study of tribological behaviour of Al-17Si-5Fe-3.5Vu-1.1Mg-0.6Zr B alloy. This material exhibits very good wear and friction behaviour when in contact with steel, even very hard steel (667 HV). This result can be exploited for further applications.
With regards to the component developed throughout this project, further forging tests would be necessary to perfect the development of the direct forged Al powder metallurgy connecting-rod using industrial equipment.
At the present time, a new code has been developed in order to facilitate the tool design and to predict the densification of such components produced from powders. This code is a 3D compressible viscoplastic version of Forge3 taking into account the thermal coupling and will soon be launched on the market.
The simulation of price for such a component leads to an average value of 5.2 ECU, which is higher than conventional steel products but could be considered with the need of fuel consumption reduction of future cars. This price simulation means that only the holes of the big and small ends and the faces are machined after forging.
This project covers several aspects from the characterization of powder metallurgy (PM) aluminium alloys, the modelling and tools development of a cost-effective shaping process (direct powder forging), to the production of automotive components and their testing.
Direct powder forging of Al high performance alloys offers interesting perspectives for developing low weight automotive components through a combination of the advantages of Al-Si-XPM materials (high strength, low thermal expansion, wear resistance) with the benefits of PM processing, this is net-shaping (high materials yield, reduced processing and machining steps). The implementation of advanced Al PM components engines can reduce the weight of present cast moving parts and thus reduce the polluting emissions of engines. In regard to cast components, significant weight reductions (minimum 30%) and new design are expected for Al automotive components.
The first stage of our work will consist in characterizing the microstructural, physical and mechanical properties of the Al-Si-XPM alloys investigated in this project (material development).
The second and third stages will be optimization of the part geometry, modelling and optimization of the forging parameters (direct powder forging), tool design (processing development), and production of parts for mechanical and engine testing (component development). Cost evaluation for a series production will be considered.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria meccanica tribologia lubrificazione
- ingegneria e tecnologia ingegneria meccanica ingegnerizzazione dei prodotti produzione sottrattiva
- scienze naturali scienze chimiche chimica inorganica metalli di post-transizione
- ingegneria e tecnologia ingegneria ambientale energia e carburanti
- ingegneria e tecnologia ingegneria dei materiali metallurgia
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
92109 Boulogne-Billancourt
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.