Recyling of rinse waters from metal finishing facilities elimination of organics by catalytic oxidation

Informazioni relative al progetto

RECYCAT

ID dell’accordo di sovvenzione: BRPR950034

Progetto chiuso

Data di avvio 1 Dicembre 1995

Data di completamento 28 Febbraio 1999

Finanziato da

• Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Costo totale

Nessun dato

Contributo UE

Nessun dato

Coordinato da

GIE Anjou-Recherche
France

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati sfruttabili

Recycling of rinse waters from metal finishing facilities elimination of organics by catalytic oxidation; RECYCAT

The electronic industry uses large amounts of rinse water for the production of printed circuit boards (PCBs) and semiconductors. The development of a new water recycling process based on advanced oxidation was studied within a European Research Project coordinated by Anjou Recherche. Typical organic compounds found in rinse waters from printed circuit boards (PCB) production were treated in a lab-scale test rig by catalytic ozonation followed by biological degradation. Ozonation in presence of a transition metal supported catalyst allowed a 25% TOC removal with acceptable ozone doses (3-4 g O3/g TOC). A pilot scale prototype combining catalytic ozonation, biological granular activated carbon and reverse osmosis was then built and installed in a semiconductor plant located in France. This prototype is a fully automated, mobile unit designed for a 1 m3/hr throughput.. The pilot scale results fully validated the results obtained at the lab scale : a TOC and conductivity abatement of about 96% were routinely obtained.