Ziel
Objectives and content
The crankshaft is a critical part of every lifting
cylinder engine. Its dimensional and form accuracy is
not only responsible for the economic life of the whole
engine, but it also directly influences the quality of
combustion and the exhaust rate of the engine.
In the automotive industry, crankshafts are usually a
mass product. Numerous variants in smaller batch sizes
are used, for example, in truck, marine or other diesel
engines. Due to their size and special geometry,
crankshafts are one of the most difficult of components
to manufacture for any combustion engine.
The potential for rationalising the current manufacturing
sequence is very high. There are 4 main stages during
the machining process on a crankshaft: roughing, heat
treatment, finishing and superfinishing. Rough machining
is usually done on turn broaching machines, finish
machining is done on grinding machines and superfinishing
is done on special purpose polishing machines.
Particularly with steel crankshafts for high efficiency
cars and trucks, thermal treatment takes place in special
equipment between roughing and finishing.
The principal objective of the CoCoS project (CBN
Grinding of Crankshafts in one Set-up) is to drastically
reduce this process chain to a single flexible and multifunctional set-up on a single machine, to be demonstrated
on the chosen example of crankshafts.
Main achievements:
A reduction in the number of production sequences for
complex shaped functional parts, by using flexible, outof-roundness grinding, with a 60% reduction in the number
of machines and handling systems required.
An improvement in the machining processes through the
development of innovative grinding wheels to reduce
overall cycle times and costs by 30%.
The development of new non-contact sensing techniques
to maintain the accuracy of the more flexible process to
1 mm repeatability.
The development of grind hardening (in which the
grinding process is used to simultaneously heat treat the
component surface) for crankshaft steels combined with
the development of less pollutant coolants to give a 60%
reduction in energy consumption and pollution.
The consortium brings together six industrial partners
and three research centres from four different EU
countries. The partners have been selected for this
project in order to complement and enhance individual
capabilities and to enable a European exploitation of the
results. The collaboration of End users from car and
track industries, Machine Tool builder, Grinding Wheel
manufacturer, monitoring system and coolant producer with
research organizations, from the first stage of the
process design will guarantee the success of the project.
The partners have contacts throughout the complete
European automotive and truck industry. These contacts
will ensure the spreading of the project results beyond
the consortium, through licenses or joint ventures. With
further industrial development beyond this proposed
project, it is expected that the technology will be
introduced into mass production within a further 2-3
years.
After a successful completion of the project it is
envisaged to extend the benefits of the project to other
parts within the automotive industry as new oval shaped
pistons, camshafts and transmission shafts and also
towards to other Sectors: Paper Machinery (production of
lawn mowers), Capital Goods like Machinery, Handling
Systems (production of camshafts, constant velocity
joints).
The priority research tasks within the programme
addressed by this project are 1.1.7M and 1.1.5M.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Maschinenbau Produktionstechnik subtraktives Fertigungsverfahren
- Technik und Technologie Maschinenbau Fahrzeugbau Automobiltechnik
- Naturwissenschaften Geowissenschaften und verwandte Umweltwissenschaften Umweltwissenschaft Umweltbelastung
- Naturwissenschaften Mathematik reine Mathematik Geometrie
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
20870 ELGOIBAR
Spanien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.