Ziel
The objective of the project is to lay the technical base for the development of a new generation of HSS coated hobs suitable for high speed and dry cutting. These are the demonstrations of the feasibility of coated hobs, that can be used in dry cutting and coated hobs with a significant performance gain (at least tripling specific chip volume) over current products in lubricated cutting. The future European generation of hob coatings will be conceived for: - work in dry or marginally lubricated cutting, - display of a predictable wear, - cutting of tougher materials with higher specific chip volume, - recoating after resharpening with the same productivity after the different resharpening and recoating cycles. * One of more important industrial objective is the possibility to increase the hobs productivity with an improvement of cutting speed. * We can expect to reach with an innovative HSS coated hob a maximum value of Vt: 250 m/min corresponding a high improvement of chip volume / time, and a subsequent decrease of machining costs of about 30%. * A second industrial goal is to improve the roughness of the workpiece in direction to reduce the number of successive operations during the fabrication of gears, and to improve the quality of final products. This improvement can reduce the total production gear costs of about 5-10%. * An other industrial objective is the reduction (partially or totally) of lubrification (dry or near-dry machining) with a subsequent reduction of machining costs of about 14 -16%. Due to environmental, health, and economic considerations, there is a strong user demand to replace the coolant machining with a lubricant-free machining. The project is subdivided into 3 workpackages: - WP1: (preparation): the first wp is dedicated to prepare the ground for the development. It comprises four avenues:. - analysis and validation of the wear mechanism of hobs in the field test and the laboratory test.; - investigation and optimisation of bifunctional coatings combining 3rd generation industrial hardcoats with state of the art selflubricating coatings. - WP2: (exploration): the second wp is dedicated to exploration: - operationalization of a process for the deposition of metal reinforced ternary bichalcogenides ontest samples and analysis of their mechanical and tribological properties; - Laboratory tests of the new generation coatings perfected in the laboratory. - Optimisation of the bifunctional coatings with laboratory and field tests. -wp3: (industrial feasibility): the third wp will be dedicated to industrial feasibility of dry hobbing with a new generation of bifunctional coatings: It comprises scale up and integration of the coating processes for the selected avenues and extensive field and laboratory testing for the optimisation of the operational behaviour of bifunctional coatings in dry hobbing. It will be concluded by the final technical and economic report. Brite-Euram aims covered by the project are 1.2.2.M 1.2.3.S 2.1 and 2.3.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Maschinenbau Produktionstechnik subtraktives Fertigungsverfahren
- Sozialwissenschaften Wirtschaftswissenschaften Wirtschaftswissenschaft Produktionswirtschaft Produktivität
- Technik und Technologie Werkstofftechnik Beschichtung
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
10040 Caselette
Italien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.