HIGH EFFICIENCY MILL FOR THE MANUFACTURE OF MIXED FEEDS

Ziel

To demonstrate a high efficiency 100-125 HP hammer mill for the manufacture of animal feed, based on similar smaller 5-50 HP mills developed by the same company.
A 50 % saving in electrical consumption is expected compared to conventional mills with a horizontal straft, while a payback period of 1 year is foreseen.

The raw material, fed by gravity, is milled by hammers located perpendicularly to the vertical straft, without being transported by these hammers. Twenty hammers are foreseen, each with 4 working positions. The hammers are surrounded by a cylindrical sieve allowing the exit of the ground particles at the right size.
A saving of 50 %, i.e. 732000 kWh/yr for 330 days/yr and 24 h/day, is expected compared to conventional horizontal mills. Further advantages of the vertical mill are a low level of vibrations and no powder losses into the atmosphere. The design of the mill is innovatory.

Programm/Programme

ENG-ENDEMO C - Programme (EEC) of demonstration projects and industrial pilot projects (EEC) in the energy field, 1985-1989

Thema/Themen

3.1 - AGRICULTURE

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

DEM - Demonstration contracts

Koordinator

MOLINOS SAYMA SA

EU-Beitrag

Keine Daten

Adresse

FERNANDO EL CATOLICO 48
50007 Zaragoza
Spanien

Gesamtkosten