Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2022-12-27

NEW DREDGING METHOD FOR MAINTENANCE DREDGING

Obiettivo

To demonstrate that water injection technology can allow a specific energy saving of 1 kWh/m3 silt compared to conventional dredging methods, or 172 TOE/year/dredger for an annual dredging of 2 million m3 of silt. Payback time is estimated at 2 years.
The third tests carried out depending of the place and the maximum spoil transport distance. Results are energy savings between 1,3 to 3,4 kWh/m3.
System proved before mentioned energy savings, but is sensitive to parameters of work site.
The principle of this new dredging method consists of desintegrating silt which settles on the bottom of harbours by injecting water into the silt layer. Density currents of silt containing water are then generated and directed to deeper outside the harbours. The transport of the spoil takes place in a natural way which makes it possible to dredge continuously with two water injection device. This could be operated by 1 or 2 persons, instead of 2 to 4 men (trailing suction hopper dredge) or 4 to 8 people (bucket dredge).
During the demonstration, a new dredge-boat will be built and tested in different harbours. The efficient operation of the new dredging technology would be assessed by the measurement and the evaluation of various parameters : energy consumption, water injection pressure and flow, density currents velocity, turbidity...
Preliminary estimations have shown that the water injection dredge consumes 0.2 kWh/m3 silt, the average between bucket and trailer hopper - dredgers being 1.2 kWh/m3 silt. It is assumed that the dredger will deal with 2 000 000 m3 silt/year.
Investment cost is estimated at 2.1 million HFL. The exploitation of the new dredger would generate a saving of 500 000 HFL/year for energy costs and of 600 000 HFL/year for operating costs. This would lead to a payback time of 2 years.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

DEM - Demonstration contracts

Coordinatore

WATER INJECTION DREDGING BV
Contributo UE
Nessun dato
Indirizzo
C/O HAM BV RIVIUM QUADRANT 2 P.O. BOX 8574
3009 Rotterdam
Paesi Bassi

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0