Obiettivo Complex co-extrusions offer good barrier properties against water vapour, gases and aromas, together with outstanding mechanical properties. During extrusion and vacuum forming a lot of waste is produced. For several years now the SME propose shave been looking at different technical solutions to efficiently separate the different co-extruded layers in order to recover and thus reuse valuable polymers, such as polystyrene. The proposed RTD work will focus on the production of easily recyclable co-extruded sheets based in the use of a renewable biopolymer as interlayer. The use of a biopolymer as inner layer in the food container sheets, can selectively facilitate the adhesion of layers - by dissolving it in hot water, for instance. A broad range of separation techniques is then available to separate the different layers. In this way, fabrication losses can directly be recycled and reprocessed internally leading to a reduction in waste (up to 40 %). Campo scientifico natural scienceschemical sciencespolymer sciences Programma(i) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Argomento(i) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Invito a presentare proposte Data not available Meccanismo di finanziamento EAW - Exploratory awards Coordinatore ENVASES DEL VALLES, S.A. Contributo UE Nessun dato Indirizzo PORVENIR S/N -ZONA INDUSTRIAL SUR 08450 LLINARS DEL VALLES (BARCELONA) Spagna Mostra sulla mappa Costo totale Nessun dato Partecipanti (1) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto INTEGRATED RECYCLING SYSTEMS LTD. Regno Unito Contributo UE Nessun dato Indirizzo Burnt Meadow Road North Moons Moat B98 9PA Redditch Mostra sulla mappa Costo totale Nessun dato