Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-05-15

Electromagnetic forming of tube and sheet metal for automotive parts (EMF)

Obiettivo

This project intends to develop electromagnetic forming (EMF) for full-scale industrial application both from tube and sheet material. The overall aim is to reduce the weight of the vehicles to support the reduction CO2 emissions. As EMF is most suitable for aluminium this will be the focus in the project. The project will start from the investigation and optimisation of process parameters and the determination of material behaviour during EMF. Through the utilisation of laboratory tools representing specific features of parts input will be provided for the realisation of two industrial demonstrators displaying the advantages of EMF.
Experimental and virtual procedures are considered as well as process parameters and EMF equipment. The link between experimental work and simulation is important for the project in order to develop EMF towards an industrial application, fitting modern production strategies.

Campo scientifico (EuroSciVoc)

Programma(i)

Argomento(i)

Invito a presentare proposte

Dati non disponibili

Meccanismo di finanziamento

CSC - Cost-sharing contracts

Coordinatore

VOLVO CARS BODY COMPONENTS AB
Contributo UE
Nessun dato
Indirizzo

29380 OLOFSTROEM
Svezia
Costo totale
Nessun dato

Partecipanti (9)