Obiettivo
Plasma technology has been investigated in the frame of new production processes for carbon blacks and graphite. Although proven feasible, work remains to be done on the development of high quality materials. It has been proven by some of the partners that fullerenes can be produced on this equipment and probably also nano-tubes. The present project covers the development of a plasma production technology for carbon nano-particules ranging from carbon black, over fullerenes to nano-tubes. In the frame of this project those new materials, especially fulleneres and nano-tubes will be made available in sufficient quantities to partners for evaluation and application development. The application fields covered are: electrochemistry, polymers, organic synthesis and hydrogen storage.
After evaluation of the percolation behaviour of the first plasma carbon black samples in LDPE it was concluded:
Some of the received carbon black samples could be used in the production of conductive plastic compounds and in the production of colored plastics:
-The commercial grade (Ensaco 250) had in LDPE clearly the lowest percolation threshold and the highest conductivity;
-In LDPE the plasma blacks Colza and C2H4 could also have some industrial applications in conductive compounds if their resistivities versus carbon black loadings are considered;
-The dispersion classes varied between 1-5. Dispersion class 1 (C8H8 and Ensaco 250), indicated that these samples had the best carbon black dispersion;
-The experimental percolation weight fractions for the new samples seemed to be fairly well in line with the calculated values.
Evaluation of five different carbon black/fullerene mixture samples in LDPE.
As stated in the previous section also some of the received carbon black/fullerene samples could be used in the production of conductive plastic compounds and in the production of colored plastics:
-If compared to the previous plasma black samples, the conductivities of these compounds were lower and needed significantly higher loadings (2-6 w-% higher) of carbon black/fullerene to reach the needed conductivities (<10+3 ohm cm);
-Plasma 325 and 314, if used more than ca. 26 w%, could be used in conductive compounds;
-Plasma black 330 had the highest percolation concentration (27 w-%) and the lowest conductivity;
-All of these samples had a low dispersion class (0.7 - 2.5) in LDPE indicating the filler is well dispersed in LDPE.
Oxygen indexes after the fullerene part in carbon black/fullerene mixtures was dissolved out with toluene The onset time of the oxidation peak at 200ºC was clearly the shortest with 25w;
- Ensaco 250 in LDPE. Second was the sample with 27 w-% Plasma 325 in LDPE. The longest onset time was detected with 31 w-% Plasma 325. Comparison of conductivities of carbon black and carbon black/nanotube mixture samples in elastomer;
-The nanotube part (ca. 10 w-%) did not give any improvement on the conductivity of the elastomer compound.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche elettrochimica elettrolisi
- scienze naturali scienze fisiche fisica del plasma
- scienze naturali scienze chimiche scienze dei polimeri
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Parole chiave
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
2830 WILLEBROEK
Belgio
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.