Obiettivo
The aim of this project is to demonstrate that, by using modern technology and along with the appropriate planning it is possible to generate energy with acceptable economic results, from springs which are used to cover various needs, in a way that both, the acquiescence of all the parties involved on the one hand and the environmental protection on the other, are guaranteed.
This project will also help so that technology and know-how are transferred towards Greek companies which are engaged in a small hydropower plant construction and it will help grow through the demonstration of the efficiency of the relevant technology.
The project is a small hydropower plant (in the place of an old plant which was constructed in the early 30's and was operating till the early 60's, in order to cover the needs of the Monastery and the nearby camp). The nominal power of the suggested project is 63 kW (133 kW more than the power of the old plant) with a head of about 23m and nominal flow of 0.36 m3/s. It is consisted of a small tank, there where the springs are, a 243 m penstock with a diameter of 0.63 m and a hydro-power house with a crossflow turbine which will be installed into the already existing building of the old plant. Innovative elements: For the water reception and the protection of the natural beauty of the springs, two places of storage of water in direct communication between them, will be created: A. a small pond of about 100 m2 and B. a forebay of about 10 m3 in order to affect the environment of the springs as less as possible.
The project will manage conflicting uses of water (irrigation, water supply, fish culture) and maximize the generation of electric power through the use of a central computer system.
The rotor is consisted of two connected rotors, as all two compartment crossflow, but with a leading pitch of the turbine blades of the one part. For the protection of the rotor from corrosion and for the best efficiency of the turbine, due to the decrease of friction, the rotor will be covered by special plating. This cover will be a mixture or epoxy resin and ceramic powder.
To avoid a leak of lubricant from the bearings to the inner parts of the turbine, there will be one more tightening ring made of Teflon, without contact of the moving parts.
The production cost is estimated to be 0.0514 ECU/kWh.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettrotecnica energia elettrica
- ingegneria e tecnologia ingegneria meccanica tribologia lubrificazione
- ingegneria e tecnologia ingegneria civile ingegneria idraulica irrigazione
- ingegneria e tecnologia ingegneria ambientale energia e carburanti energia rinnovabile idroelettricità
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
KALPAKI IOANNINA
Grecia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.