Obiettivo
To achieve an energy saving of approx.20% of the heat and electricity consumption referred to the drying process and to obtain an efficient quality control of the dryer product with drastic reduction of the waste products.L%
We studied the project and we realized the building drawings for a sample cell, we projected the hardware and software automatic control system of the drying cycle and also of datakeeping.
We realized the weighing system on the sample cells with different reading of the weight of 5 loomplanes on the low, medium and high part of the stacking.
We started up the system examining the correct reading of the data, the real practicability of the regulation based on the last of the weight. Is underlined that not all the dryer cycles have the same type of weight less.
We think these first results are satisfactory, regarding the realization of a more effective regulation system.
Base the control upon the weight loss of the lower group of trays appear to be more applicable as the wight loss of these trays requires a longer period of time.
All dryers of modern design are equipped with a regulation system which allows to control the feeding of hot air and the extraction of humid air, taking into consideration the duration of the cycle and avoiding to damage the material. The control and regulation system of the drying cycle are currently based on the continous measuring of the temperature and humidity in the drying environment.
The water evaporation speed can be expressed with the relationship :
dG/dt = Kv(t-ts) [kg/h]
dG/dt is the evaporation speed
(t-ts) is the difference in psychometric temperature of the circulating air
Kv is the coefficient which depends on various factors such the clay, the product, the technical caracteristics of the dryers.
The currently used system do not control directly the (t-ts) but the temperature and humidity of the dryers means. Thanks to the proposed regulation system, the ratio dG is mesured directly, in the course of time, expressed in kg/h of dt evaporated water of determined quantity of material.
This measurement allows to control directly the curve of drying and to regulate it effectively in the way that is suitable. This is possible thanks to the installation of continuous weighing system (load units) in the chambers immediately under one of more of the supports of the drying material. The system is so precise as to allow the evaluation of the humidity of the product with the passing of time to a chance of 0.2% of the dried weight. Moreover it is possible to install the units on various points of the chamber, thus evaluating the drying speed of the material put both in the most favorable and in the least favorable positions.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali informatica e scienze dell'informazione software
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sistemi di controllo
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
37135 Verona
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.