Ziel
The aim of this project is to demonstrate the technical and economical feasibility of a Cheng-cycle control system in a high quality folding boxboard producing industry in order to reach a maximum flexibility in steam and electricity production.
This first application in European industry will be designed to follow the variations in steam and power consumption, caused by the fluctuations in the production process especially in case of a web break. Therefore considerable savings of energy will be especially in case of a web break. Therefore considerable savings of energy will be reached, as well as a substantial reduction of NOx-emission, without increasing CO emission. The Eindhoven University of Technology will participate to evaluate and analyse the system and its parameters in order to even improve the performance characteristics to achieve the highest energy savings and the lowest environmental loads.
Measurements were carried out between July 1992 and April 1993. The following table summarises the actual targets achieved compared with the guaranteed values :
MODE OF OPERATION GUARANTEED VALUE ACHIEVED VALUE
1. Full steam injection 36,0% 38,7%
without additional combustion
2. Full additional combustion 76,8% 82,8%
with 2,5 t/h steam injection
During May 1994 the first 500 hours of operation inspection was carried out. No problems were evident. Availability of the plant was found to be 97,5%.
Overall the project was adjudged to be very successful.
From an economic point of view there is a nett financial saving because of price advantage between electrical power from the grid vs. own produced energy minus additional operational costs. This nett saving comes to DM5,5 Mio per annum. Taking a total investment cost of DM16,3 Mio gives a simple payback of 2,99 years.
The efficiency of energy production with Cheng-cycle is greater than with the public grid; this represents an environmental improvement. There are also positive environmental impacts apart from the energy saving. Even without the use of a catalyst a susbtantial reduction of NOx, emission is possible in a Cheng-cycle installation without increasing CO emission.
Because of the absence of steamblow, a specific local advantage is achieved. Steamblow imposes severe environmental load in certain areas such as the German Ruhr.
The aim of this project is to demonstrate the technical and economical feasibility of a Chen-cycle control system in a boxboard producing industry. This FIRST APPLICATION IN EUROPEAN INDUSTRY is highly innovative because it will be possible to follow the variations in steam and power consumption, caused by fluctuations in the production process, especially in case of a web break. This imbalance normally leads to a major raise of electricity costs and a large steam (energy) destruction. By introducing a control system based on the Cheng-cycle principle, this loss of energy and raise in electricity costs can be avoided. Annual savings up to 3.400 TOE are expected.
During 1992 two Cheng-cycle systems were insatlled. these, together with an existing steam boiler and turbine system, supplied both steam boiler was available to supply steam only and the public grid was available to supply electricity.
each Cheng-cyle system has three inputs that determine steam and electricity production:
Gas supply to the gas turbine
Gas supply to the burner
Amount of steam injection
For each Cheng-cycle system a given steam and electricity demand can be met by combinations of different values for the three inputs. The project involved devising the optimum strategy for supply of both steam and electricity.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
4040 NEUSS
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.