Obiettivo
The toy manufacturing sector makes major efforts each season to launch new products. The highly seasonal nature of this sector means designing new items in a short time frame, which means that there is the risk of manufacturing a design without knowing what its level of acceptance will be by the market. Manufacturers rely more and more on the use of prototypes to show the product in fairs and to identify the factors of success of the design at a lower cost, as well as to test functionality and technical characteristics of the model.
Each company develops its own methodology in the construction of prototypes, according to the specific needs of the product and to the resources to be invested. The method used currently is a completely craft based one, and it presents big disadvantages and limitations, due to the fact that prototypes can only be made with certain materials and the finish does not permit proper testing of the performance of the product.
One problem in the product manufacturing phase is the high level of investment required for the construction of injection moulds. This is a slow process and it is difficult and sometimes complicated, to carry out trials on the piece, experimental assemblies and product validation. Later on, if the result is not satisfactory, modifications are made directly on the mould, which increases the problem. This investment is difficult to amortize, since the series are short and the prices of toys can not be increased.
Therefore the toy sector requires the development of products defined through the construction of the first model in a quick and effective way and at a lower cost. This project was concerned with the transfer to the toy manufacturing sector of the technologies of SLS and rapid tooling used in aerospace and automotive manufacturing. By means of Selective Laser Sintering (SLS), different materials can be used in order to give this technique great opportunities for use in the manufacture of prototypes. Another urgent need of toy manufacturers is cheaper moulds for preparing series of 100 to 5000 pieces and rapid tooling (a technology arisen from the SLS) can permit the launching of short series in plastic materials.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Parole chiave
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
03440 IBI - ALICANTE
Spagna
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.