Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2022-12-23

Release and combustion of pressure-liquefied gases: experiments and modelling

Ziel

The principal objective of the project is the evaluation of environmental impact of accidents involving depressurisation or total loss of containment with a pressure-liquefied fuel gas, two-phase fuel release into the atmosphere, vapour-droplet cloud formation and combustion. Such accidents are very hazardous because large amounts of hydrocarbon fuels burn uncontrollably generating powerful heat fluxes, the fragments of ruptured vessel being thrown at high velocities as projectiles, often leading to property losses and causing fatal injuries. Since large-scale experiments are very dangerous and expensive, the following research method is chosen: to perform small-scale experiments and develop mathematical models for all stages of the process (vessel break-up, liquefied fuel flash evaporation and expansion of the two-phase cloud, fragments scattering, fuel cloud ignition and fireball evolution). The developed models based on the latest advances in mechanics, physical chemistry and combustion theory, will make the up scaling of experimental results possible. The models will be validated against the large-scale experiments available in the literature and case histories of major accidents. The numerical codes based on the developed models will be used to predict the results of probable accidents and to evaluate their impact on the environment.

The following objectives will be achieved:
To study experimentally and theoretically the liquefied gas boiling-up, flash evaporation and aerosol formation upon rapid depressurisation following total loss of containment;
To study theoretically and experimentally the over pressurisation and break-up of containment filled in with a metastable liquid-gas mixture; To develop a break-up criterion applicable to different types of vessels;
To model numerically the break-up of a containment, number and mass distribution of fragments, acceleration and final velocities of fragments;
To develop a physical theory of an outflow of a super-heated liquid-vapour mixture in the case of sudden loss of the containment, its mixing with the atmospheric air, droplet break-up, two-phase cloud formation and propagation in the atmosphere;
To model the flame propagation in a fuel vapour-droplet cloud and fireballs occurring after ignition of a two-phase cloud. To calculate the structure of fireball, to determine the fireball maximum size, lift-off and burning time;
To calculate the radiation emission heat fluxes from a burning vapour-droplet cloud and determines the distances corresponding to different hazard levels;
To apply the developed method to analysis of results obtained in the experiments of different scales available in the literature, give recommendations for using the method developed (range of parameters, scaling, assessment of possible effects). To generalise the results in order to enable their use in engineering practice, quantitative risk assessment and for case history studies;
To develop a method for quantitative evaluation of hazardous effects of BLEVEs.
The expected results will provide insight into fundamentals of two-phase combustion, materials behaviour under intense dynamical loading, non-equilibrium phase transitions. The results will have direct practical applications answering to the critical issues:
To determine the minimal safe distance between each storage and autoroutes, railways, public buildings;
To develop the methods for quantitative evaluation of characteristics and environmental impact of accidents expressed in clear equivalent units suitable for their practical use.

Thus, the results will contribute to risk assessment, loss prevention and safety promotion at the storage site, in transportation and processing of pressure-liquefied hydrocarbon fuels.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

Daten nicht verfügbar

Koordinator

Université de Poitiers
EU-Beitrag
Keine Daten
Adresse
BP 109 - Site du Futuroscope
86960 Futuroscope Cedex
Frankreich

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (7)

Mein Booklet 0 0