Obiettivo
The aim of this project is to develop a new mixed numerical/experimental methodology in order to predict the second stability (long-term) of the cementless hip implant prior to the clinical tests. The combination of computational models together with in vitro measurements will enable
-to evaluate the device attributes (such as its endurance),
-to evaluate the performance of the device in vivo when subject to various physiological or pathological conditions
-to carry out a complete performance evaluation and risk analysis of any new design solution prior to undertaking lengthy and extensive clinical trials.
This would be particularly useful in reducing poor initial designs, which often in the past have only been noticed after clinical treatment. The development of this pre-clinical tool to assess the design evolution of new implants systems will allow a significant increase of the success rate of cementless hip implants all the patient life. Furthermore, the improved design and simulation will result also into an increased acceptance of the hip replacement and improved articulation of movements.
Objectives:
A wide range of skeletal diseases affects the joints of the middle-aged & older population, osteoarthritis of the hip being the most common. When conservative methods of treatment fail, it is needed to replace the affected joint with an artificial replacement called joint prosthesis. Every year more than 500 000 citizens worldwide undergo hip replacement.
Total hip replacements are therefore the most important implantable orthopaedic device. Cementless hip prosthesis, the most recent type of hip prosthesis, represents today 35% of the European market. The current trend is to significant increase of its market share due to its lower failure rate that cemented hip prosthesis. Although total hip arthroplasty can be considered as a reliable surgical, between 5 & 20% of cementless hip prosthesis fail after 10 years. Today most failures are related to the design of the implant and the lack of methodology and tool to validate in the long term the design before the clinical tests.
Therefore the aim of the project is to develop and validate a new mixed numerical/experimental methodology in order to predict the long-term stability of the cementless hip implant before the clinical tests.
Work description:
The specific RTD goals are the following:
-Definition of a complete "failure mode Vs. biomechanical cause Vs. associated hazard" (MODE-CAUSE-HAZARD) scenario.
- Development of innovative computational procedures to capture the biomechanical effect of the biological bone response with special reference to the bone/implant interface.
-Application of this pre-clinical validation framework to a given design of prostheses, to assess its effectiveness and its applicability within an industrial context.
In order to achieve these objectives the workprogramme is divided into 5 workpackages:
1 - Technical specifications definition
2 - Identification of failure modes of cementless hip implants and their biomechanical causes
3 - Modelling and tests in vitro for the bone behaviour
4 - Development of a predictive computer model
5 - Industrial validation: Development and in vitro evaluation of enhanced stem designs
Milestones:
The major milestones are:
-Obtention of clear and exploitable information on clinical failures of hip implants
-Completion of the viscoelastic modelling of bone behaviour
-Prescription of step-by-step bone interface movement
-Estimation of the sensitivity of the stability of the implant
-Definition of an optimal implant design on the basis of the failures models
The combination of computational models together with in vitro measurements in the developed pre-clinical tool will enable:
- The evaluation of the device attributes (such as its endurance)
- The performance of the device in vivo when subject to various physiological or pathological conditions.
- To carry out a complete performance evaluation & risk analysis of any new design solutions prior to undertaking lengthy & expensive clinical trials.
This would be particularly useful in reducing poor initial designs, which often in the past have only been noticed after clinical treatment.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
69120 VAULX EN VELIN
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.