Ziel
The objective of the project is to develop technologies that will enable mass manufacturing of Field Emission Displays (FED) satisfying the requirements of the market in terms of power consumption, brightness, lifetime, colour and cost.
The consortium will combine proven technologies in the area of flat panel displays with some advanced and innovative concepts such as:
-0.5µm gate holes;
- direct deposition of carbon nanotubes on glass;
- semi-conducting and grid-supporting spacers and distributed getters attached to the frame.
The project is organized around research on materials and development of necessary equipments for large area holographic lithography, automatic inspection and placement of spacers.
The consortium brings together companies and institutes with complementary expertise that are ready to take the challenge of building during the course of the project 18 inch demonstrators able to promote the replacement of CRT.
Objectives:
The partners strongly believe that Field Emission Displays (FED) are particularly suited for the substitution of CRT in consumer applications for the medium sizes that are in the range between LCD (20") and plasma (42"). They plan to show that FED can satisfy the market requirements in terms of power consumption, brightness, lifetime, colour, and cost. They will work on technologies that will prepare the next phase of mass manufacturing.
The consortium will combine technologies already known for FED or which have been successful in the manufacturing of other flat panel displays, with a certain number of new concepts especially in the area of cathode formation and packaging. The project deals with specific research on materials, and development of new equipments that will be qualified during the project through demonstrators.
Work description:
The workpackages are centred either on the development of a new equipment or the research of a new combination of materials. First, less than 0.5µm resolution holographic lithography tools will be developed for printing at high throughput. Also included in this workpackage is the fabrication in a very clean environment of high quality holograms.
A second package will study the direct deposition of carbon nanotubes (CNT) on glass by two original routes: polymer-dispersed CNT deposited through a mask and chemical vapour deposition assisted by an extremely local heating.
The best will be selected for the subsequent fabrication of cathodes on a high strain point glass and assembly of a first demonstrator with a 7 inch size.
Additionally, cathodes using indirect CNT will be fabricated and tested in order to select the best option between the different gate technologies for triode-type FED: under-gate, remote-gate and normal-gate structures.
Four work-packages cover issues related to packaging.
The first one deals with research on new glass spacers with semi-conducting behaviour to solve the problems of charging and research on techniques for the fabrication of the grid-supporting spacers necessary in a remote-gate structure. For the handling of the huge quantities of tiny glass spacers, first equipment will be developed for the automatic inspection as a reliable quality control.
The second equipment deals with the alignment, placement and fixing of spacers on the cathode using principles compatible with high throughput. A work-package will work on a new type of glass frame that could incorporate getters distributed all around the periphery of the panel for efficient vacuum conservation and would be compatible with vacuum sealing process by laser.
The final packages cover the assembly of 18 inches CNT demonstrators and their final testing and evaluation.
Milestones:
- M3 Agreement on specifications;
- M8 Semi-conducting spacers qualified-
- M12 Holographic mask equipment ready, Grid supporting spacers, frame and getters qualified;
-M14 HR lithographic equipment;
- M15 Direct CNT demonstrator 7inch size;
- M16 Indirect CNT 18in demonstrators ready for evaluation;
- M18 Final report.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Werkstofftechnik Farben
- Technik und Technologie Werkstofftechnik amorphe Feststoffe
- Naturwissenschaften Naturwissenschaften Optik Laserphysik
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Schlüsselbegriffe
Schlüsselbegriffe des Projekts, wie vom Projektkoordinator angegeben. Nicht zu verwechseln mit der EuroSciVoc-Taxonomie (Wissenschaftliches Gebiet).
Schlüsselbegriffe des Projekts, wie vom Projektkoordinator angegeben. Nicht zu verwechseln mit der EuroSciVoc-Taxonomie (Wissenschaftliches Gebiet).
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
60150 THOUROTTE
Frankreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.