Obiettivo
The INPROM project is a long term research project aimed to investigate the following question: are scanning probe recording techniques, whose performances were recently demonstrated with a specific polymer media, applicable also to phase change or magnetic media? The successful demonstration of IBM's Millipede supports the idea that probe recording has a potential for high capacity, small sized memory chips. However, industry would certainly accept easier this new technology if it could be applicable to today's most widely used rewritable media, namely phase change and magnetic materials.
OBJECTIVES
The InProM project aims at giving to Europe the opportunity to compete in the large market of data storage. The success of the project would put the consortium in the position to play a key role in the future development of SPM based recording systems. Probe storage technologies are foreseen to be very promising for ultra high-density memories. With the Millipede, IBM Zurich has demonstrated storage device prototype, which offers an attractive solution for small sized, high capacity and low access time storage. Within this framework, the consortium's objective is to investigate, with the support of IBM, novel recording media for SPM (Scanning Probe Memory). The possibility to adapt efficient recording media, such as phase change and magnetic, to the Millipede concept, will be studied.
DESCRIPTION OF WORK
The work will focus on the development of phase change and magnetic media for SPM recording. Recording on phase change materials will be investigated using both electrical and thermal tips. In the first approach, Joule heating will be applied to induce reversible phase transition. In this case, the limited size of the heated volume ensures the rapid cooling necessary for amorphisation. A potential drawback is the reliability of a good contact, which will be thoroughly investigated. In the second approach, heating is ensured by heat conduction from thermal tips, such as the ones used by IBM in the Millipede. An appropriate design has to be investigated to ensure a sufficiently rapid cooling. For the development of a magnetic media, two solutions will be investigated. The first one consists in transferring the hard disc head architecture to a cantilever. Reading is achieved by means of a magnetoresistive sensor. For writing, we propose to use the MR element as a flux guide to focus an external magnetic field produced by a coil. Integrated MR sensors, compatible with the Millipede design, will be developed. As a second option, we propose to investigate the use of a MRAM type media. Here, data are stored in MRAM elements on the media. Readout is achieved by measuring the resistance of the element of the cell. The writing process will be performed by means of the supporting field of the conductor embedded below the cell. For all the proposed approaches, tribology is a key issue and will be intensively investigated. Three European laboratories are in charge of the technological work: CEA-LETI/DRFMC and MESA+ will perform experimental work of on phase change and magnetic materials. The Exeter University will be support this work by additional characterisation and simulations. The Inprom consortium will be supported by IBM Zurich who will join the technical discussion and supply thermal cantilevers.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche scienze dei polimeri
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori
- ingegneria e tecnologia ingegneria meccanica tribologia
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Parole chiave
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
75752 PARIS CEDEX 15
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.