Ziel
Small gauge high carbon content steel wires are produced through successive drawing operations that reduce wire cross section up to 1000 times and more for instance from 5.5 to 0.18 mm). This very delicate process requires one or two intermediate heat treatments in order to re-form the original well proportioned microstructure of the wire, so enabling the material to withstand the final extreme grain elongation that is necessary to get the very high mechanical resistance required by the market to the final product (3.200 - 3.300 Mpa). The heat treatment consists in:
- phase a) heating up the wires up to +/- 1.000 C.
- phase b) abrupt cooling down of the wires up to 550-600 C. The very high working temperatures makes this process very critical in terms of energy consumption and efficiency.
The standard technology is actually based on "open fire furnaces" (phase a) and "lead baths" (phase b), pushing the industries to try different ways of process including the technology of "fluidized beds" for potenting (phase b) in view of the potential damages produced to the environment and to the operators by the use of big quantities of lead. Nevertheless, the fluidized bed technology cannot actually guarantee heat transfer coefficients as high as those obtained with the use of the lead and is not very well accepted.
HEATWIRE objectives and mains expected innovations are then related to: Objectives:
- reduction of energy consumption between 30% and 40%;
- increasing of efficiency in the use of energy up to 40%.;
- final removal of "lead bath" technology with consequent positive impacton the environmental and user's health with the new FIB technology; - constant heat transfer coefficients and constant values of process parameterswithin the equipment;
- increase of wire strength up to 10-20% with consequent reduction of tyresteel content. This should lead to a potential saving of car fuel andtoxic emissions.
Innovations:
- new compact high efficiency equipment with constant heat transfer coeffi cients. The new furnace will be based on an optimized fluidized bedtechnology;
- implementation of an integrated monitoring system capable of keeping theprocess under control;
- determination of the optimum thermic cycle relevant to the high carbon steels(0.7 and 0.8% C) being used;
- capability of reproducing (production level) a specified thermic cycle, sogetting mechanical characteristics of the final wire within very littletolerances.
The application of the new technology would lead to an expected energy saving of approximately 1.2 x 10 6 MJ only for the European lines. In addition, the increased resistance of the final product (steel cord), would lead to a lower tyre weight and a consequent reduction of toxic emissions. The new technology will allow to reduce production costs without reducing "labour" costs, and this is really going to have an important impact on European society, also in view of the quite little currency rate of the competitors of non European countries. The benefits of the research will be of general interest as they will be applicable to all high carbon steel wires industries, including production of cables, springs, steel cord and bead wire (automotive), hose wire, fasteners.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Agrarwissenschaften Landwirtschaft, Forstwirtschaft und Fischerei Landwirtschaft Getreide und Ölsaaten
- Technik und Technologie Umwelttechnik Energie und Kraftstoffe
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
1180 Bruxelles
Belgien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.