Obiettivo
Small gauge high carbon content steel wires are produced through successive drawing operations that reduce wire cross section up to 1000 times and more for instance from 5.5 to 0.18 mm). This very delicate process requires one or two intermediate heat treatments in order to re-form the original well proportioned microstructure of the wire, so enabling the material to withstand the final extreme grain elongation that is necessary to get the very high mechanical resistance required by the market to the final product (3.200 - 3.300 Mpa). The heat treatment consists in:
- phase a) heating up the wires up to +/- 1.000 C.
- phase b) abrupt cooling down of the wires up to 550-600 C. The very high working temperatures makes this process very critical in terms of energy consumption and efficiency.
The standard technology is actually based on "open fire furnaces" (phase a) and "lead baths" (phase b), pushing the industries to try different ways of process including the technology of "fluidized beds" for potenting (phase b) in view of the potential damages produced to the environment and to the operators by the use of big quantities of lead. Nevertheless, the fluidized bed technology cannot actually guarantee heat transfer coefficients as high as those obtained with the use of the lead and is not very well accepted.
HEATWIRE objectives and mains expected innovations are then related to: Objectives:
- reduction of energy consumption between 30% and 40%;
- increasing of efficiency in the use of energy up to 40%.;
- final removal of "lead bath" technology with consequent positive impacton the environmental and user's health with the new FIB technology; - constant heat transfer coefficients and constant values of process parameterswithin the equipment;
- increase of wire strength up to 10-20% with consequent reduction of tyresteel content. This should lead to a potential saving of car fuel andtoxic emissions.
Innovations:
- new compact high efficiency equipment with constant heat transfer coeffi cients. The new furnace will be based on an optimized fluidized bedtechnology;
- implementation of an integrated monitoring system capable of keeping theprocess under control;
- determination of the optimum thermic cycle relevant to the high carbon steels(0.7 and 0.8% C) being used;
- capability of reproducing (production level) a specified thermic cycle, sogetting mechanical characteristics of the final wire within very littletolerances.
The application of the new technology would lead to an expected energy saving of approximately 1.2 x 10 6 MJ only for the European lines. In addition, the increased resistance of the final product (steel cord), would lead to a lower tyre weight and a consequent reduction of toxic emissions. The new technology will allow to reduce production costs without reducing "labour" costs, and this is really going to have an important impact on European society, also in view of the quite little currency rate of the competitors of non European countries. The benefits of the research will be of general interest as they will be applicable to all high carbon steel wires industries, including production of cables, springs, steel cord and bead wire (automotive), hose wire, fasteners.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze agricole agricoltura, silvicoltura e pesca agricoltura cereali e semi oleosi
- ingegneria e tecnologia ingegneria ambientale energia e carburanti
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
1180 Bruxelles
Belgio
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.