Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-05-07

Expert wind turbine control system for power optimization and load reduction

Ziel



The objective of the project is to improve the performance of active stall regulated wind turbines by using "self-optimisation" procedures, and to comprise these in a dedicated "expert wind turbine controller module" for use with already existing wind turbine controllers. The specific objective is to develop a prototype for the dedicated controller module, and two adaptive optimisation strategies: A procedure for optimisation of the blade angles at wind speeds below rated, and a load control procedure for better utilisation and extension of lifetime of the critical parts of the turbine structure at wind speeds above rated.

From a detailed service life investigation on wind turbines of different make, the 'hot-spots' in the structure and in the functional parts are defined, with regard to lifetime loading. With the purpose of later being able to control the loads in these 'hot-spots' two active stall regulated turbines placed on significant different sites and of different make are installed with measuring equipment. In a first measuring campaign both turbines are measured for reference purpose, also including power performance and wind conditions. The optimisation strategies are developed in an iterative process where knowledge about active stall regulation and control system response together with the new ideas, are modelled into an aeroelastic simulation program. This code is used to virtually test the procedures. At the same time the demands to the dedicated controller module with respect to communication, necessary processing speed, storage capability, long term data safety etc. is defined. Two prototypes for the dedicated controller module are build up, and the functions are tested in a test stand along with the wind turbine controllers. The prototypes are implemented on the two test turbines and a new measuring campaign is commenced. During this, the results and benefits of the control strategies are evaluated with regard to the reference measurements, and eventually modifications to the procedures are made.

The expected achievements for active stall regulated turbines, is a power performance improvements for wind speeds below rated due to the blade angle optimisation, and a more competitive turbine due to better utilisation of the structure and/or safer operation, for wind speeds above rated. Significant lifetime cost savings is expected from avoiding major repair work because of better load control, and a power performance increase is expected on sites where the general loading on the turbine is below the projected loads. The results will be exploited directly in the wind turbines developed by the companies participating in the project. It is further the intention, that the dedicated controller module after a product development phase will be put on market for sale to European wind turbine manufactures.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

CSC - Cost-sharing contracts

Koordinator

WEA Engineering A/S
EU-Beitrag
Keine Daten
Adresse
399,Frederiksborgvej
4000 Roskilde
Dänemark

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (2)

Mein Booklet 0 0