Obiettivo
The aim of the work is to further develop amorphous protective layers based on SiO2 to improve their mechanical properties and increase the temperature at which the amorphous layer is stable, thereby enhancing its effectiveness as a diffusion carrier. It is planned to investigate plasma assisted chemical vapour deposition (PACVD), laser chemical vapour deposition (LCVD) and laser fusion methods for production of the coatings, and to develop coating systems containing an interlayer to reduce the incidence of solid/solid reactions between the ceramic coating and the substrate.
It has been established that amorphous silica coatings deposited by plasma assisted chemical vapour deposition (PACVD) are excellent barriers to ingress of aggressive species at temperatures up to 450 C for 16000 hours and 750 C up to 8000 hours. Increased stability of these layers was achieved by incorporating a titanium nitride (TiN) interlayer to prevent solid/solid reactions between the silica and the substrate steel (Incoloy 800H and 2.25 chromium (Cr) ferritic and thereby maintain the amorphous nature of the silica layer. Silica coatings have been deposited by laser chemical vapour deposition (LCVD) and laser fusion. In the former case it has been demonstrated that the protective properties of the silica can be modified by deposition conditions, and in this way a strain tolerant coating has been produced. Laser fusion processes have been developed to allow independent control of powder and substrate temperature in a single laser beam so that substrate heating is minimised. Optimised coatings using the PACVD system have been produced on a gas turbine blade and a laser fusion coated boiler tuber is currently undergoing a trial in a power station boiler.
Amorphous silica coatings, produced by plasma assisted chemical vapour deposition (PACVD), laser chemical vapour deposition (LCVD) and laser fusion, were deposited on various metallic materials and then exposed in air and simulated coal gasification atmospheres (CGA) for periods of up to 2 years at 450 C to 1000 C. In some case interlayers of titanium nitride and silicon were used to promote adhesion and to reduce interdiffusion between the coating and the substrate.
The results indicate that PACVD silica deposited onto Incolog 800 H provided outstanding protection at 450 C. At 750 C, however, interaction with the substrate was observed which was reduced by the presence of a titanium nitride interlayer. Silica coatings would not adhere to the surface of 2.25 chromium steel in the absence of a titanium nitride interlayer. In contrast protection at 450 C in the CGA using the LCVD coatings was highly dependent upon coating density, the presence of interlayers and silica thickness in the range 0.35 to 3.5 um (adhesion of the silica layer to the substrates was good without the use of interlayers).
Novel methods were developed for deposition of silica coatings by laser depostion in which overheating of the substrate was avoided by the use of inclined substrates. Coaxial feeding of the powder was also successfully used to minimize substrate heating.
The industrial potential of the optimized coatings was evaluated for application in gas turbines, coal fired power plant, coal gasification systems and nuclear reactors.
THE OBJECTIVE OF THE PROJECT IS TO DEVELOP IMPROVED COATINGS FOR SERVICE IN AGGRESSIVE ENVIRONMENTS AT HIGH TEMPERATURES. CURRENT PRACTICE IS TO USE ALLOYS OR METALLIC COATINGS THAT FORM PROTECTIVE OXIDE LAYERS OF POLYCRYSTALLINE CR2O3 OR AL2O3. THESE OXIDE LAYERS ARE REQUIRED TO BE GOOD DIFFUSION BARRIERS AND TO BE MECHANICALLY AND CHEMICALLY STABLE IN THE ENVIRONMENT. HOWEVER, SINCE GRAIN BOUNDARY DIFFUSION PROCESSES DOMINATE IN THE TECHNICALLY IMPORTANT TEMPERATURE RANGE UP TO 1000 C, THE POLYCRYSTALLINE NATURE OF THESE OXIDES GREATLY REDUCES THEIR EFFECTIVENESS AS DIFFUSION BARRIERS AND THEIR MECHANICAL STABILITY IS OFTEN POOR WHEN THERMAL CYCLES ARE IMPOSED, DUE TO THE LARGE DIFFERENCES IN EXPANSION COEFFICIENT RELATIVE TO THE SUBSTRATE. TO OVERCOME MANY OF THE DIFFICULTIES NOW ENCOUNTERED, IT IS INTENDED TO DEVELOP AMORPHOUS PROTECTIVE OXIDE LAYERS WITH MATCHING THERMAL EXPANSION COEFFICIENT IN THE OXIDE AND SUBSTRATE.
THE RESEARCH PART OF THE STUDY WILL BE CARRIED OUT IN 3 PHASES :
- COATING PRODUCTION USING PAVD, LCVD AND LASER FUSION TECHNIQUES. THE EFFECTS OF ADDITIVES TO EXTEND THE PROTECTION OF SILICA WILL BE INVESTIGATED IN THIS PHASE.
- COATINGS EVALUATION INCLUDING LAYER CHARACTERISATION AND ADHESION AND THERMAL TESTS.
- INDUSTRIAL TRIALS ON GAS TURBINES, DIESELS AND BOILER TUBING AS WELL AS HIGH PRESSURE AUTOCLAVES FOR NUCLEAR FUEL COMPONENTS.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche chimica inorganica metalli di transizione
- ingegneria e tecnologia ingegneria ambientale energia e carburanti energia da combustibili fossili carbone
- ingegneria e tecnologia altre ingegnerie e tecnologie ingegneria nucleare
- ingegneria e tecnologia ingegneria dei materiali rivestimenti e pellicole
- scienze naturali scienze fisiche ottica fisica dei laser
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
TW11 0LW Teddington
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.