Ziel
IMPROVEMENT OF TEM MEASURING AND INTERPRETATION TECHNIQUES
TEM PROSPECTING IS A RELATIVELY NEW DEVELOPMENT IN ORE EXPLORATION, WHICH WAS DEVELOPED IN COUNTRIES LIKE THE USSR, CANADA AND AUSTALIA.
TEM SHOWS A VERY LOW NOISE LEVEL AND IS INSENSITIVE TO TOPOGRAPHIC INFLUENCES. BOTH FEATURES HELP TO QUALIFY TEM AS A FAST AND DEEPLY PENETRATING EXPLORATION TOOL.
THE APPLICATION OF THIS TECHNIQUE, AN APPRAISAL OF THEIR ADVANTAGES IN PRACTICAL EXPLORATION IS THE AIM OF THE RESEARCH PROJECT. THE WORK IN THIS PROJECT CONSISTS OF :
1) TEST MEASUREMENTS WITH THE TEM METHOD OVER SEVERAL (5-6) KNOWN ORE BODIES IN EUROPE. THE FOLLOWING DATA SHALL BE COLLECTED: DECAY CURVES OF ALL THREE SPATIAL MAGNETIC COMPONENTS. WITH A HIGHLY SENSITIVE SQUID MAGNETOMETER THE CURVES SHALL BE RECORDED TO "LATE" TIMES (0,1 TO 0,5 SECONDS AFTER THE CUT-OFF OF THE PRIMARY FIELD), WHICH CORRESPOND TO THE EARLY STAGES OF IP-EFFECTS (COMPLEX RESISTIVITY). AT SOME OF THE TEST SITES THE ELECTRIC FIELD AT THE SURFACE MAY BE REGISTERED IN ADDITION TO THE VERTICAL MAGMETIC COMPONENT IN AVAILABLE DRILL HOLES.
2) FOR THE INTERPRETATION OF THE DATA NEWLY DEVELOPED INTERPRETATION DIAGRAMS FOR SIMPLIFIED MODELS SHALL BE USED (THIN SHEET IN AIR AND IN A CONDUCTING MEDIUM).
3) SCALE MODELLING IN AN EXISTING MODEL TANK, SIMULATING THE GEOLOGICAL SETUP OF THE ORE BODY UNDER INVESTIGATION AS CLOSE AS POSSIBLE AS POSSIBLE, PERMITS A COMPARISON WITH THE RESULTS OF NUMERICAL MODELLING. THE INDEPENDENT APPROACHES TO MODELLING VIA NUMERICAL METHODS AND SCALE MODELS WILL GIVE A NECESSARY AND USEFUL CHECK OF THE RESULTS OF BOTH METHODS.
Programm/Programme
Thema/Themen
Data not availableAufforderung zur Vorschlagseinreichung
Data not availableFinanzierungsplan
Data not availableKoordinator
30655 Hannover
Deutschland