Obiettivo
The aim of this project is the improvement of the European CECC rules for the evaluation of the reliability of electronic components. This objective will be pursued by developing specific tools (test structures and testing methods) which will enable an evaluation of the reliability of electronic components within the manufacturing process. This would greatly decrease the costs related with qualification of finished products. In the present situation most European semiconductor manufacturers and design groups use different (mostly proprietary) test structures, measurement techniques, reliability evaluation procedures and prediction tools. This unavoidably makes data exchange both complicated and time consuming, and usually implies duplication of efforts and delays in the design/production cycle.
The project is directed towards a development of the CECC documents 00804 and 00805, which have been produced as a guide for the application of reliability requirements of electronic components within the EN 29000 system, which currently provides the rules for an organization's quality system. This is further specified by the EN W 190000-6, 'Procedures for approval and quality management'. In order to demonstrate the process capability within a total quality evaluation system, the above mentioned document recommends the use of suitable technology characterisation vehicles. These vehicles should enable the study of intrinsic reliability measurements, related to most commonly encountered IC failure mechanisms. The strong need for a written standard required by industry for the cost effective implementation of quality and reliability assurance schemes is testimonied by the large effort spent on the JESSI AC 41 Technology Assessment consortium. One of the outcomes of this project will be the availability of a common proposal describing automatically generated test structures and associated reliability assessment methods for main 0.5 uM CMOS integrated circuits failure mechanisms. This reliability documentation has been proposed as a standard to the CENELEC Standardization Organisation (Technical Committee 117, 'Electronic Design Automation'). In order to stimulate acceptance and usage of standard reliability test vehicles by the European Electronics industry, and to consolidate a written standard on the evaluation of semiconductor products reliability by means of these test vehicles further efforts are needed:
(i) the effectiveness of the testing methods must be validated through experiments, considering emerging technologies with feature size scaled to 0.35 um (ii) test structures and methods for validation of mixed bipolar/CMOS technologies must be included;
(iii) the set of considered failure mechanisms must be completed including, for instance, electro-static discharge phenomena. In this project, two big semiconductor manufacturers will render available specific test structures, and one important electronic system producer will take part in the application of selected structures and methods from the users' point of view. The study will cover the development of standardized testing methods for the most important VLSI failure mechanisms, namely: latch-up in CMOS, oxide breakdown, hotelectron degradation, electromigration, electro-static-discharge (E.S.D.). Structures proposed to CENELEC TC 117 Standardization Organization by JESSI AC41 will be adopted as a starting point for the first four failure mechanisms. The availability of these structures to the present Consortium at the starting of the project has already been assured.
A well-balanced team of six research institutions will cooperate with semiconductor manufacturers in the development of testing methods and in the design of new test structures. Each institute will take care of the analysis of a specific failure mechanism or testing method. Experience and capability of the selected team covers, beside technical skills, also acquaintance with CECC/CENELEC activity and development of documents meeting the formal requirements of CECC/CENELEC standards. The focus will be on wafer level reliability evaluation with fast methods, while for some mechanisms (E.S.D. in particular), packaged test structures will be used. The effectiveness of the proposed structures will be evaluated also by means of device simulations. Obtained data will be also used to validate extrapolation laws currently employed within IC reliability predictors and simulators. A comparison between experimental data and prediction of circuit reliability simulators will be performed using simple circuits as representative examples. We will also pursue a comparison of the results of wafer level testing with conventional long-term accelerated testing, and, whenever possible, with reliability data concerning finished integrated circuits. The final objective is the proposal to CECC/CENELEC of a new standard, consisting in improved test structures and testing procedures, suitable for a complete reliability evaluation down to a 0.35 um feature size for CMOS technology, including bipolar devices considering a wider range of failure mechanisms. A specific task of the project is devoted to the organization of results and the preparation of documents meeting the formal requirements of CECC/CENELEC standards.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria dei materiali solidi amorfi semiconduttori amorfi
- ingegneria e tecnologia ingegneria meccanica ingegnerizzazione dei prodotti
- scienze sociali sociologia relazioni industriali automazione
- scienze naturali scienze fisiche elettromagnetismo ed elettronica semiconduttività
- scienze naturali informatica e scienze dell'informazione scienza dei dati scambio di dati
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
35131 PADOVA
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.