Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2022-12-27

CONSTRUCTION AND DEMONSTRATION OF 10 LOW FLOOR BUSES EQUIPPED WITH A NEW ENERGY SAVING DRIVE SYSTEM

Ziel

Demonstration of operability of 10 low floor buses equipped with an electric transmission in public transportation.
Evidence of energy savings and reduced emissions as well as advantages in operating features and handling as a result of the use of the diesel electric drive system.
Demonstration of a public transportation system of the future : low floor bus with a completely level floor and electric wheel motors.
Three buses have been in regular line operation for about 11 months. Final results concerning energy savings are not yet available.
The Electric transmission is a completely new type of drive for motor vehicles. Mechanical parts and functions (such as transmission, drive shaft, clutch, retarder) are replaced with electric components and electronic control elements. A generator is flanged directly to the internal combustion engine.
The drive motors are preferably designed as wheel motors or are mounted in the immediate vicinity of the wheel. Only then is a true low-floor bus possible.
The other components can be arranged at will. Flexible electric connecting cables vs rigid mechanical components. Since there is no mechanical connection between the internal combustion engine and the driving wheels, the stepless variation of the torque-speed conversion can be adjusted to a optimal level, and is based on the system's software. As a result, a smaller engine can be used to provide the same performance, and this engine runs under optimum conditions for fuel economy and therefore minimum emissions, under all driving conditions.
The increase in riding comfort made possible by the stepless and jerk-free drive is enhanced by the reduction in noise level because there is no drive train connected between the engine and the frame of the vehicle. The engine and the generator are a self-contained mechanical system. The Neoplan MIC basic model is the first bus with a unitized plastic body. Its weight has been reduced by one third, as compared to conventional buses. This weight reduction represents an additional savings in energy during normal urban line operation.
For the demonstration of the energy savings of the electric transmission in public service buses, the following phases are going to be carried out:
- Planning and designing of vehicles and drive system.
- Manufacturing of 10 public service buses and equipping with the components of the electric transmission.
Operation of the buses under normal conditions at a public transport authority with optimization of system software with respect to energy savings and low emission operation and comparative measurements of fuel consumption during typical city bus cycles.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

DEM - Demonstration contracts

Koordinator

MAGNET MOTOR GMBH
EU-Beitrag
Keine Daten
Adresse
PETERSBRUNNER STRAßE 2
82319 Starnberg
Deutschland

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten
Mein Booklet 0 0