Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-18

QUANTItative scanning probe microscopy techniques for HEAT transfer management in nanomaterials and nanodevices.

Objectif

The thermal properties of nanostructured materials are of fundamental importance to modern technology, but at present reproducible metrological definitions, tools and methods do not exist. This is because the mechanisms of heat transport at the nanoscale are entirely different to those at the macro scale.
The project will place nanothermal metrology on a solid basis by an integrated physics-based experimental and modelling effort to:
• Define a common terminology for nanothermal measurement
• Realise standard materials and devices for measurement and calibration of nanothermal measurements
• Develop new instruments and methods for traceable nanothermal measurement
• Develop calibrated and validated thermal models covering the range from atomic to macro-scale
• Apply these tools to selected representative industrial problems
• Assess the tools for suitability for adoption as potential standards of measurement including their traceability and reproducibility
The objectives will be achieved by a team comprising physicists, materials scientists, modellers, instrumentalists, microscopists, industrial partners (including SMEs and OEMs) and National Measurement Institutes.
The outputs of QUANTIHEAT will be embodied in highly characterised reference samples, calibration systems, measurement tools, numerical modelling tools, reference measurements and documented procedures. The availability of calibrated numerical modelling tools will facilitate the rapid “digital” thermal design of new nanosystems without the need for extensive prototyping. Their validation against experiment over all length scales will provide a solid basis for the deployment of new nanostructured materials, devices and structures having optimised performance without the need for excessively conservative design. Standardization is a key driver of industrial and scientific progress: QUANTIHEAT is expected to constitute a de-facto standard for a key area of physical measurement at the nanoscale worldwide.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/fr/web/eu-vocabularies/euroscivoc.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

FP7-NMP-2013-LARGE-7
Voir d’autres projets de cet appel

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

CP-IP - Large-scale integrating project

Coordinateur

CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
Contribution de l’UE
€ 1 314 508,43
Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (21)

Mon livret 0 0