Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-06-18

QUANTItative scanning probe microscopy techniques for HEAT transfer management in nanomaterials and nanodevices.

Cel

The thermal properties of nanostructured materials are of fundamental importance to modern technology, but at present reproducible metrological definitions, tools and methods do not exist. This is because the mechanisms of heat transport at the nanoscale are entirely different to those at the macro scale.
The project will place nanothermal metrology on a solid basis by an integrated physics-based experimental and modelling effort to:
• Define a common terminology for nanothermal measurement
• Realise standard materials and devices for measurement and calibration of nanothermal measurements
• Develop new instruments and methods for traceable nanothermal measurement
• Develop calibrated and validated thermal models covering the range from atomic to macro-scale
• Apply these tools to selected representative industrial problems
• Assess the tools for suitability for adoption as potential standards of measurement including their traceability and reproducibility
The objectives will be achieved by a team comprising physicists, materials scientists, modellers, instrumentalists, microscopists, industrial partners (including SMEs and OEMs) and National Measurement Institutes.
The outputs of QUANTIHEAT will be embodied in highly characterised reference samples, calibration systems, measurement tools, numerical modelling tools, reference measurements and documented procedures. The availability of calibrated numerical modelling tools will facilitate the rapid “digital” thermal design of new nanosystems without the need for extensive prototyping. Their validation against experiment over all length scales will provide a solid basis for the deployment of new nanostructured materials, devices and structures having optimised performance without the need for excessively conservative design. Standardization is a key driver of industrial and scientific progress: QUANTIHEAT is expected to constitute a de-facto standard for a key area of physical measurement at the nanoscale worldwide.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

FP7-NMP-2013-LARGE-7
Zobacz inne projekty w ramach tego zaproszenia

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

CP-IP - Large-scale integrating project

Koordynator

CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
Wkład UE
€ 1 314 508,43
Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (21)

Moja broszura 0 0