Cel This project is intended to improve the quality of design and specification of mechanical components used typically in the aerospace automotive, electrical, electronic and textile engineering industries. From a worldwide study of design methodologies, a general model of the new product design and introduction process has been proposed. Within this systematic design process, the role of an expert system for the selection of materials, treatments and coatings has been identified. Analysis of the working practices of designers within the 2 industrial partners has produced a user based specification for the system.An initial, top level, design architecture has been developed whichhas identified the essential components of the proposed system.Materials databases of the 2 industrial partners are currently being rationalised with the objective of producing a standardised list of materials. A rationalised classification of materials is being developed based on the characteristic properties of each class, taking account of the influence of composition. A list of material properties that need to be included within this project is also under development.The project will gather together the state-of-the-art design rules that take into account plastic deformation, fatigue, wear and corrosion, develop a methodology that makes full use of them based on a comprehensive set of case studies and encapsulate the result in a knowledge-based system to assist design engineers in both SMEs and large companies and thereby improve the quality, reliability and maintainability of components and tools produced by industry within the European Community. Dziedzina nauki natural sciencescomputer and information sciencesdatabasesengineering and technologymaterials engineeringtextilesnatural sciencescomputer and information sciencesartificial intelligenceexpert systemsengineering and technologymaterials engineeringcoating and films Program(-y) FP2-BRITE/EURAM 1 - Specific research and technological development programme (EEC) in the fields of industrial manufacturing technologies and advanced materials applications (BRITE/EURAM), 1989-1992 Temat(-y) Data not available Zaproszenie do składania wniosków Data not available System finansowania Data not available Koordynator Lucas Engineering and Systems Ltd Wkład UE Brak danych Adres Dog Kennel Lane Shirley B90 4JJ Solihull Zjednoczone Królestwo Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (2) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko Centre Technique des Industries Mécaniques (CETIM) Francja Wkład UE Brak danych Adres 52 avenue Félix Louat 60304 Senlis Zobacz na mapie Koszt całkowity Brak danych NEDERLANDSE PHILIPS BEDRIJVEN Niderlandy Wkład UE Brak danych Adres Zobacz na mapie Koszt całkowity Brak danych