Risultati finali
Schools • S1 School: Advanced Geomechanics and fundamentals of Sustainability and Environmental Impact • S2 School: Advanced geotechnical design and fundamentals of Carbon cycle and Greenhouse effect. • S3 School: Low carbon design in current geotechnical practice • S4 School for Industry: Novel low carbon technologies for geotechnical infrastructure. Workshops • W1 Workshop: Aligning research objectives with industry needs • W2 Workshop: Design concepts for low-carbon geo-infrastructure • W3 Workshop: From design concepts to technological solutions • C Conference: Geotechnical Infrastructure and the Low-Carbon Agenda
Supervisory Board of the network Mid-term review meetingObjectives Investigate mechanical behaviour (i.e. stiffness and strength) of compacted clay samples at a range of water contents reinforced with randomly distributed inexpensive natural fibres Expected Results Feasibility of eco-reinforced compacted soils as a sustainable material for routine use in construction and improvement of current empirical approaches for fibre-reinforced geomaterials by applying modern unsaturated soil mechanics
Technical criteria and procedures for implementing novel concepts into design of low-carbon geotechnical structuresObjectives To develop and refine routine procedures for design of low-carbon geotechnical structures based on all the scientific contributions developed in TERRE through the individual PhD projects Expected Results A technical document developed to a stage of pre-guidelines, where technical and carbon calculations of different novel design concepts are developed and discussed.
Manual for carbon footprint assessment in geotechnical constructionObjectives Develop methods for carbon footprint assessment in geotechnical construction where resource consumption and environmental effects are taken into account. The approach is based on the adaption to geotechnical construction of known carbon footprint assessment techniques developed for buildings and above-ground infrastructure (i.e. life-cycle analysis). Expected Results Procedures for carbon footprint assessment techniques and more global environmental impact of different geotechnical technologies developed in the network using a methodology that integrates infrastructure characteristics (i.e. resource consumption and environmental effects) and impact of eco-techniques studied in the network (e.g. vegetation)
Low-impact lime treated geo-materials for efficient reuse and recyclingObjectives Investigate mechanical response (stiffness and shear strength) of clayey soils (marginal geomaterials) mixed with lime in low fractions as affected by short-term chemical reactions Expected Results Deeper understanding of short-term effects of lime on soil microstructure and hydro-mechanical behaviour and conceptual model for field implementation
‘Engineered’ bio-interfaces for stabilisation of geo-infrastructureObjectives • Monitor the moisture evolution in a newly-vegetated ground (seeded or transplanted) in large-scale laboratory experiment and relate it to root architecture to establish a relationship between the evolution of suction profile and root growth • Investigate a new hydro-seeding technique to encourage vegetation growth as a means to stabilise diffuse landslides. The mechanical and hydrological effects of vegetation growth will be monitored at a highly instrumented site near Naples in pyroclastic covers susceptible to debris-flows. • Monitor the root-enhanced soil strength evolution for a newly-vegetated ground in large-scale laboratory experiment and relate it to root architecture to establish a relationship between the evolution of strength and root growth. • Investigate a softer engineering approach based on the stimulation of existing populations to form biofilms, such that associated products (e.g. Exopolysaccharides - EPS) to contribute to soil stability and resistance to erosion Expected Results • A model to predict suction in the short term based on existing dynamic model for root growth. • A deep understanding of the interaction of moisture regime and vegetation in pyroclastic slopes and guidelines for hydro-seeding depending on morphology and soil type • A model to predict vegetated soil strength in the short term based on existing dynamic model for root growth. • In depth understanding of mechanical effects of microbial activity on mechanical response of soils and approach to ‘engineer’ soil bacteria to stabilise and protect slopes from erosion
Geothermal energy exchanger embedded in conventional shallow geotechnical structuresObjectives Development of methods to use shallow geotechnical structures as heat exchanger systems based on seasonal energy storage systems (thermal energy stored in the ground in summer and extracted in winter). Expected Results Temperature effects on the soil and interface behaviour and efficiency of ‘shallow’ heat exchange process based on hydro—thermal flux modelling
Engineered soil-atmosphere sandwiched interfaces for ‘climate enhanced’ geo-infrastructureObjectives One-dimensional experimental tests and numerical modelling will be carried out to investigate the performance of different sandwiched interfaces to enhance evaporation and hamper rainwater infiltration Expected Results Numerical modelling of the coupled hydro-mechanical problem (including local non-equilibrium phenomena occurring within interface material pores) and conceptual model for assemblage of sandwiched interfaces
Timber materials for concrete/steel-free geostructuresObjectives Explore the use of bio-based material such as timber and its derived engineered products, for sheet pile and crib wall structures. Identifying bio-based materials that are locally available and can be subjected to low-impact surface treatment to make it resistant to bacterial attacks and exposure to the atmosphere. Develop a time depended model which takes in to account soil-air-structure interactions. Develop new types of bio-based retaining walls in conjunction with WIKA using low impact timber or modified bio-based material. Expected Results Design criteria for selection and treatment of bio-based construction material to be used for sheet pile and crib walls. Advanced time depended interaction model which could be interlinked with a service life model.
‘Engineering’ vegetation for carbon sequestration and storage in new earthfillsObjectives Quantify the incorporation of organic matter originating from roots into the soil, and obtain dynamic insight on the effects of root activity and penetration on soil organic carbon (SOC) content and composition in the close vicinity of roots under vegetation and in fallow soil. Expected Results Stocks of root carbon, SOC and soil isotopic C at different soil depths in compacted earthfills in the laboratory and near railway lines (southern France) equipped with rhizotrons.
Earthen construction materials for concrete/steel-free geostructuresObjectives Investigate mechanical behaviour at a range of as-formed water contents and wetting-induced water contents of compacted clay samples reinforced with suction Expected Results Feasibility of suction-reinforced earthen materials and improvement of current empirical approaches for earthen material design by applying modern unsaturated soil mechanics
• Project website • YouTube broadcasting • Facebook page
Pubblicazioni
Autori:
Sravan Muguda Viswanath, Samuel John Booth, Paul Neil Hughes, Charles Edward Augarde, Celine Perlot, Agostino Walter Bruno, Domenico Gallipoli
Pubblicato in:
Géotechnique Letters, Numero 7/4, 2017, Pagina/e 1-18, ISSN 2045-2543
Editore:
ICE Publishing Ltd.
DOI:
10.1680/jgele.17.00081
Autori:
Alessandro Fraccica, Enrique Romero, Thierry Fourcaud
Pubblicato in:
E3S Web of Conferences, Numero 92, 2019, Pagina/e 12014, ISSN 2267-1242
Editore:
EDP sciences
DOI:
10.1051/e3sconf/20199212014
Autori:
Jacopo Zannin, Alessio Ferrari, Maxime Pousse, Lyesse Laloui
Pubblicato in:
E3S Web of Conferences, Numero 92, 2019, Pagina/e 18011, ISSN 2267-1242
Editore:
ES3 Web of Conferences
DOI:
10.1051/e3sconf/20199218011
Autori:
Gianluca Speranza, Alessio Ferrari, Maxime Pousse, Lyesse Laloui
Pubblicato in:
E3S Web of Conferences, Numero 92, 2019, Pagina/e 07011, ISSN 2267-1242
Editore:
E3S Web of Conferences
DOI:
10.1051/e3sconf/20199207011
Autori:
Melis Sutman, Gianluca Speranza, Alessio Ferrari, Pyréne Larrey-Lassalle, Lyesse Laloui
Pubblicato in:
Renewable Energy, 2019, ISSN 0960-1481
Editore:
Pergamon Press Ltd.
DOI:
10.1016/j.renene.2019.07.035
Autori:
L.M.W. Rossi, B. Rapidel, O. Roupsard, M. Villatoro-sánchez, Z. Mao, J. Nespoulous, J. Perez, I. Prieto, C. Roumet, K. Metselaar, J.M. Schoorl, L. Claessens, A. Stokes
Pubblicato in:
Ecological Engineering, Numero 109, 2017, Pagina/e 249-255, ISSN 0925-8574
Editore:
Elsevier BV
DOI:
10.1016/j.ecoleng.2017.08.010
Autori:
Raül Oorthuis, Marcel Hürlimann, Alessandro Fraccica, Antonio Lloret, José Moya, Càrol Puig-Polo, Jean Vaunat
Pubblicato in:
Water, Numero 10/6, 2018, Pagina/e 688, ISSN 2073-4441
Editore:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/w10060688
Autori:
Alessia Cuccurullo, Domenico Gallipoli, Agostino Walter Bruno, Charles Augarde, Paul Hughes, Christian La Borderie
Pubblicato in:
Journal of Building Pathology and Rehabilitation, Numero 5/1, 2020, ISSN 2365-3159
Editore:
Springer
DOI:
10.1007/s41024-019-0066-4
Autori:
Abhijith Kamath, Wolfgang Gard, Jan-Willem Van de Kuilen
Pubblicato in:
E3S Web of Conferences, Numero 92, 2019, Pagina/e 12013, ISSN 2267-1242
Editore:
E3S Web of Conferences
DOI:
10.1051/e3sconf/20199212013
Autori:
Elodie Coudert, Michael Paris, Dimitri Deneele, Giacomo Russo, Alessandro Tarantino
Pubblicato in:
Construction and Building Materials, Numero 201, 2019, Pagina/e 539-552, ISSN 0950-0618
Editore:
Elsevier BV
DOI:
10.1016/j.conbuildmat.2018.12.188
Autori:
Ana Sofia Dias, Marianna Pirone, Gianfranco Urciuoli
Pubblicato in:
2017, Pagina/e 641-648
Editore:
Springer International Publishing
DOI:
10.1007/978-3-319-53498-5_74
Autori:
Ana Sofia Dias, Marianna Pirone, Gianfranco Urciuoli
Pubblicato in:
2017, Pagina/e 633-640
Editore:
Springer International Publishing
DOI:
10.1007/978-3-319-53498-5_73
Autori:
Smith, C.C. , Gonzalez-Castejon, J. and Charles, J.
Pubblicato in:
19th International Conference on Soil Mechanics and Geotechnical Engineering., 2017, Pagina/e 851-854
Editore:
ISSMGE
Autori:
Emmanuel Salifu, Gráinne El Mountassir
Pubblicato in:
E3S Web of Conferences, Numero 92, 2019, Pagina/e 11017, ISSN 2267-1242
Editore:
EDP Sciences
DOI:
10.1051/e3sconf/20199211017
Autori:
Sravan Muguda, Samuel Booth, Paul Hughes, Charles Augarde, Celine Perlot, Agostino Walter Bruno, Domenico Gallipoli
Pubblicato in:
UNSAT2018 - 7th International Conference on Unsaturated Soils, 2018
Editore:
The Hong Kong University of Science and Technology (HKUST)
Autori:
Raniero Beber, Alessandro Tarantino, Matteo Pedrotti, Rebecca Lunn
Pubblicato in:
E3S Web of Conferences, Numero 92, 2019, Pagina/e 02016, ISSN 2267-1242
Editore:
EDP Sciences
DOI:
10.1051/e3sconf/20199202016
Autori:
Ana Sofia Dias, Marianna Pirone, Gianfranco Urciuoli
Pubblicato in:
UNSAT2018 - 7th International Conference on Unsaturated Soils, 2018
Editore:
HKUST
Autori:
Riccardo Scarfone, Marti Lloret-Cabot, Simon J. Wheeler
Pubblicato in:
UNSAT2018 - 7th International Conference on Unsaturated Soils, 2018
Editore:
Hong Kong University of Science and Technology
Autori:
Gonzalez-Castejon J and Smith C
Pubblicato in:
Proceedings of the National conference on computational mechanics, 2017
Editore:
University of Birmingham
Autori:
Dainese R, Tarantino A, Belli A, Fourcaud T
Pubblicato in:
UNSAT2018 - 7th International Conference on Unsaturated Soils, 2018
Editore:
HKUST
Autori:
Scarfone R, Lloret-Cabot M, Wheeler SJ
Pubblicato in:
15th BGA Young Geotechnical Engineers’ Symposium, 2018, Pagina/e 57-58
Editore:
UNIVERSITY OF SURREY
Autori:
C. C. Smith, Gilbert, He, J. Gonzalez-Castejon, and S. Ouakka
Pubblicato in:
17th Eur. Conf. on Soil Mechanics Geotech Eng, 2019
Editore:
The Icelandic Geotechnical Society, IGS
Autori:
Sravan Muguda, Paul Hughes, Charles Augarde, Celine Perlot, Domenico Gallipoli, Agostino Walter Bruno
Pubblicato in:
The XVII European Conference on Soil Mechanics and Geotechnical Engineering, 2019, ISBN 978-9935-9436-1-3
Editore:
Icelandic Geotechnical Society
Autori:
A. Cuccurullo, D. Gallipoli, A.W. Bruno, C. Augarde, P. Hughes, C. La Borderie
Pubblicato in:
UNSAT2018 - 7th International Conference on Unsaturated Soils, 2018
Editore:
Hong Kong Institute of Science and Technology
Autori:
Alessia Cuccurullo, Domenico Gallipoli, Agostino Walter Bruno, Charles Augarde, Paul Hughes, Christian La Borderie
Pubblicato in:
The XVII European Conference on Soil Mechanics and Geotechnical Engineering, 2019
Editore:
Icelandic Geotechnical Society
Autori:
Sravan Muguda, George Lucas, Paul Hughes, Charles Augarde, Alessia Cuccurullo, Agostino Walter Bruno, Celine Perlot, Domenico Gallipoli
Pubblicato in:
Earthen Dwellings and Structures - Current Status in their Adoption, 2019, Pagina/e 191-201, ISBN 978-981-13-5882-1
Editore:
Springer Singapore
DOI:
10.1007/978-981-13-5883-8_17
Autori:
Alessia Cuccurullo, Domenico Gallipoli, Agostino Walter Bruno, Charles Augarde, Paul Hughes, Christian La Borderie
Pubblicato in:
Geotechnical Research for Land Protection and Development - Proceedings of CNRIG 2019, Numero 40, 2020, Pagina/e 753-762, ISBN 978-3-030-21358-9
Editore:
Springer International Publishing
DOI:
10.1007/978-3-030-21359-6_80
È in corso la ricerca di dati su OpenAIRE...
Si è verificato un errore durante la ricerca dei dati su OpenAIRE
Nessun risultato disponibile