Objective
With strong growly rates of 13% in the aero sector, and demands predicted to be doubled by 2032, carbon composites (CC) are under the spotlight. CC production requires a quick ramp-up that needs to be based on robust materials & processes and a solid manufacturing supply chain, where higher production rates and cost reduction are essential. The aim of AIRPOXY is to reduce production & MRO costs of CC parts in aeronautics by introducing a new family of enhanced composites that preserve all the advantages of conventional thermosets, while showing new unprecedented features such as Re-processability, Reparability and Recyclability. This will be possible through further development & validation of a family of ground-breaking thermoset resins (recently invented/patented by CID) including dynamic bonds which enable such smart behaviour. Conversion of the technology from TRL3 to 5 will be achieved in AIRPOXY, through 2 representative demonstrators of aircraft panels. Thermoforming processes previously unthinkable for thermosets will reduce manufacturing cost of CC parts by35% vs autoclave, reducing processing times from hours to minutes. Faster/cheaper repair technologies, in combination with SHM, will reduce significantly MRO costs. Additionally, a novel welding process will reduce CC bonding costs by up to 50%. Such new features will foster competitiveness & sustainability in the European aeronautics sector. AIRPOXY relies on a multidisciplinary consortium of 11 partners from 6 countries; CID as resin inventor, key technology providers IVW (thermoforming & welding), EUT(RTM), COEX(SQRTM), UOI(SHM); AEF (process simulation software), aircraft components manufacturers (EIRE, IDEC, SON), standardization experts (UNE) & an aeroconsultancy (ART). They will be supported by a strong advisory board (AIRBUS, Leonardo, Huntsman, SGL and EREA). Maximum impact of AIRPOXY will be ensured through well-balanced dissemination, communication and exploitation activities.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- engineering and technologymaterials engineeringcomposites
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
- natural sciencescomputer and information sciencessoftwaresoftware applicationssimulation software
You need to log in or register to use this function
We are sorry... an unexpected error occurred during execution.
You need to be authenticated. Your session might have expired.
Thank you for your feedback.
You will soon receive an email to confirm the submission. If you have selected to be notified about the reporting status, you will also be contacted when the reporting status will change.
Keywords
Programme(s)
Call for proposal
(opens in new window) H2020-MG-2016-2017
See other projects for this callSub call
H2020-MG-2017-Two-Stages
Funding Scheme
RIA - Research and Innovation actionCoordinator
20014 San Sebastian
Spain