Substitution of Critical Raw Materials on Aluminium Alloys for electrical vehicles

Resultado final

Project Handbook EUT M3 Manual with detailed instructions and templates for the edition of the different deliverables and compliance with the reporting obligations

Definition of the pre-treatment required by the aluminium scrap

Definition of the pretreatment required by the aluminium scrap

Report with the results of the heat treatment optimization test
Report on the standardization landscape and applicable standards
Report on specifications required by the low CRM aluminium alloys

Report on specifications required by the low CRM aluminium alloys considering peculiarities of foundry extrusion and stamping processes

Product Category Rule for aluminium components of passenger cars in Europe
Report describing design procedure and identification of new alloys with reduced CRM content

Report describing design procedure and identification of new alloys with reduced CRM content to be produced and analysed in the subsequent stages of the project

Communication and Dissemination Master Plan
Report with the results of the laboratory trials with partially recycled alloys
First Plan of Use and Dissemination of Results

SALEMA introductory video
SALEMA brochure
Project website and social media channels

Production of large Al scraps classes batches for WP 4-5-6
New alloys produced for HPDC process

New alloys produced for HPDC process (4 alloys x 3 variations x 2 t each),

Data Management Plan

Publicaciones

Hot Stamped Aluminium: Process Viability and Implications on Crashworthiness

Autores: Jaume Pujante, David Frómeta, Eduard Garcia-Llamas, Maria Giménez
Publicado en: Proceedings of the 8th CHS2 Conference: Hot Sheet Metal Forming of High-Performance Steel, 2022, ISBN 978-3-95735-150-0
Editor: https://www.verlag-wiss-scripten.de/

Il Progetto SALEMA e lo sviluppo di leghe “sostenibili” per la fonderia

Autores: Franco Bonollo
Publicado en: METEF, 2022
Editor: METEF

SALEMA Project: leghe di alluminio sostenibili a supporto della mobilità elettrica

Autores: Ruggero Zambelli, Zanei Gianluca, Franco Bonollo, Ivo De Lutiis
Publicado en: 39th Conf. Italian Association of Metallurgy, 2022
Editor: Italian Association of Metallurgy

SALEMA Project: leghe di alluminio sostenibili a supporto della mobilità elettrica

Autores: Franco Bonollo, Ivo De Lutiis, Ruggero Zambelli, G. Zanei
Publicado en: 39a edizione del Convegno Nazionale AIM, 2022
Editor: Associazione Italiana di Metallurgia

Alüminyum Endüstrisinde Kullanılan Tekno-Ekonomik ve Sürdürülebilir Yöntemlerin İncelenmesi (Investigation of Techno-Economic and Sustainable Methods Used in Aluminum Industry)

Autores: Tutku Ozen
Publicado en: 2022
Editor: ALUS

Substitution of Critical Raw Materials in Aluminum Alloys for HPDC

Autores: Claudio Mus
Publicado en: EUROGUSS, 2022
Editor: EUROGUSS

Le auto del fututo ? Leggere e green grazie all'alluminio

Autores: Giulia Armeni (Journalist), Franco Bonollo (UNIPD
Publicado en: Il Giornale di Vicenza, 2022, Página(s) 50-51
Editor: Il Giornale di Vicenza

Sostenibilità e innovazione nell’industria automotive: studio e analisi delle composizioni chimiche di leghe di alluminio

Autores: Ivo de Lutis
Publicado en: 2022
Editor: UNIPD

Modelli matematici da previsione delle caratteristiche tecnologiche di leghe di alluminio

Autores: Massimo Spoladore
Publicado en: 2021
Editor: UNIPD

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página

Descargar