CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.
I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .
Risultati finali
Project Handbook EUT M3 Manual with detailed instructions and templates for the edition of the different deliverables and compliance with the reporting obligations
Report of policy recommendations (si apre in una nuova finestra)Report of policy recommendations, including feedback from the 1st stakeholder WS
Report on the scientific and technological dissemination (si apre in una nuova finestra)Report on the scientific and technological dissemination, including feedback from the 2 stakeholders WS
Report of the service characterization of the developed sheet aluminium grades (si apre in una nuova finestra)Report on the contribution to standardization (si apre in una nuova finestra)
Report with the properties characterized for the different alloys used at the Trials (si apre in una nuova finestra)
Report on the interaction with other EU projects and EC events (si apre in una nuova finestra)
Report on the interaction with other EU projects and EC events, including report from the 2 stakeholders WS
Definition of the pre-treatment required by the aluminium scrap (si apre in una nuova finestra)Definition of the pretreatment required by the aluminium scrap
Report on the research on procedures to recover CRM and valuable elements from the dross formed (si apre in una nuova finestra)LCA result's report of the different alloys and production technologies studied (si apre in una nuova finestra)
LCA result’s report of the different alloys and production technologies studied
Report with the results of the heat treatment optimization test (si apre in una nuova finestra)Report with the analysis of the different scrap groups (si apre in una nuova finestra)
Report with the analysis of the different scrap groups provided by COMET
Report with the properties characterized for the different alloys used at the trialss (si apre in una nuova finestra)Report with the properties characterized for the different alloys used at the trials
Data for the processing of the new aluminium sheet metal grades (si apre in una nuova finestra)Innovation and Technological Development Management report (si apre in una nuova finestra)
Service requirements for the developed sheet aluminium grades (si apre in una nuova finestra)
Policy-brief (si apre in una nuova finestra)
Policy-brief, derived from Policy recommendations and including feedback from the 2nd stakeholder WS
Report on the standardization landscape and applicable standards (si apre in una nuova finestra)Report on specifications required by the low CRM aluminium alloys (si apre in una nuova finestra)
Report on specifications required by the low CRM aluminium alloys considering peculiarities of foundry extrusion and stamping processes
Product Category Rule for aluminium components of passenger cars in Europe (si apre in una nuova finestra)Alloy specifications for partially recycled alloys (si apre in una nuova finestra)
Report containing description of criteria and tools used for exploring alternative alloying systems (si apre in una nuova finestra)
Report containing description of criteria and tools used for exploring alternative alloying systems, and for performing process vs microstructure optimisation
Report describing design procedure and identification of new alloys with reduced CRM content (si apre in una nuova finestra)Report describing design procedure and identification of new alloys with reduced CRM content to be produced and analysed in the subsequent stages of the project
Communication and Dissemination Master Plan (si apre in una nuova finestra)Best Practices for Communication & Dissemination Activities (si apre in una nuova finestra)
Handbook to apply Agile methodology in non-IT research projects (si apre in una nuova finestra)
Handbook to apply Agile methodology in non-IT research projects: how-to and benefits
Report with the results obtained in the industrial laboratory trials with the different alloys (si apre in una nuova finestra)LCC result's report of the LCC of the different alloys and production technologies studied (si apre in una nuova finestra)
LCC result’s report of the LCC of the different alloys and production technologies studied
Report with the results of the laboratory trials with partially recycled alloys (si apre in una nuova finestra)Responsible Research Management Report (si apre in una nuova finestra)
Report on SALEMA new alloys sensor-based sorting ability (si apre in una nuova finestra)
First Plan of Use and Dissemination of Results (si apre in una nuova finestra)
New alloys produced for HPDC process (si apre in una nuova finestra)
New alloys produced for HPDC process (4 alloys x 3 variations x 2 t each),
Aluminium billet and extruded profile in laboratory scale (si apre in una nuova finestra)Pubblicazioni
Autori:
Osama Asghar, Mattia Franceschi, Paolo Ferro, Franco Bonollo
Pubblicato in:
Materials and Design, 2024, ISSN 0264-1275
Editore:
Elsevier BV
Autori:
Osama Asghar, Manel Da Silva, Franco Bonollo
Pubblicato in:
Slovenian Foundryman Society: Annual International Foundry Conference in Portorož, 2024
Editore:
Slovenian Foundryman Society
Autori:
Osama Asghar, Paolo Ferro, Franco Bonollo
Pubblicato in:
https://www.ieirsc.com/Home/Event International Conference on Digitization and Advancements in Materials and Metallurgical Industries, 2023
Editore:
The Institution of Engineers (India)
Autori:
Jaume Pujante, David Frómeta, Eduard Garcia-Llamas, Maria Giménez
Pubblicato in:
Proceedings of the 8th CHS2 Conference: Hot Sheet Metal Forming of High-Performance Steel, 2022, ISBN 978-3-95735-150-0
Editore:
https://www.verlag-wiss-scripten.de/
Autori:
Franco Bonollo
Pubblicato in:
METEF, 2022
Editore:
METEF
Autori:
Sonia Boczkal, Bogusław Augustyn , Joanna Hrabia-Wisnios , Dawid Kapinos , Gregory Lewis ,Pierre-François Bareel , Stéphane Savelli , Manel da Silva and Tutku Özen
Pubblicato in:
Engineering Proceedings, Numero 2023, 43, 23, 2023, Pagina/e 10
Editore:
MDPI
DOI:
10.3390/engproc2023043023
Autori:
Franco Bonollo
Pubblicato in:
METEF, 2022
Editore:
METEF
Autori:
Franco Bonollo
Pubblicato in:
"Summer School ""Critical Raw Materials for safe and resilient Europe""", 2024
Editore:
University of Padova
Autori:
Ruggero Zambelli, Zanei Gianluca, Franco Bonollo, Ivo De Lutiis
Pubblicato in:
39th Conf. Italian Association of Metallurgy, 2022
Editore:
Italian Association of Metallurgy
Autori:
Franco Bonollo, Ivo De Lutiis, Ruggero Zambelli, G. Zanei
Pubblicato in:
39a edizione del Convegno Nazionale AIM, 2022
Editore:
Associazione Italiana di Metallurgia
Autori:
Tutku Ozen
Pubblicato in:
2022
Editore:
ALUS
Autori:
Claudio Mus
Pubblicato in:
EUROGUSS, 2022
Editore:
EUROGUSS
Autori:
Giulia Armeni (Journalist), Franco Bonollo (UNIPD
Pubblicato in:
Il Giornale di Vicenza, 2022, Pagina/e 50-51
Editore:
Il Giornale di Vicenza
Autori:
Jessica Mataj
Pubblicato in:
2024
Editore:
University of Padova
Autori:
Alessio Trabuio
Pubblicato in:
2022
Editore:
UNIPD
Autori:
Ivo de Lutis
Pubblicato in:
2022
Editore:
UNIPD
Autori:
Massimo Spoladore
Pubblicato in:
2021
Editore:
UNIPD
Autori:
Andrea Bongiovanni, Manel Da Silva, Alberto Castellero
Pubblicato in:
La Metallurgia Italiana, Numero 2024, 115, 5, 2024, Pagina/e 50-56, ISSN 0026-0843
Editore:
Edimet SpA
È in corso la ricerca di dati su OpenAIRE...
Si è verificato un errore durante la ricerca dei dati su OpenAIRE
Nessun risultato disponibile