Substitution of Critical Raw Materials on Aluminium Alloys for electrical vehicles

Livrables

Project Handbook EUT M3 Manual with detailed instructions and templates for the edition of the different deliverables and compliance with the reporting obligations

Definition of the pre-treatment required by the aluminium scrap

Definition of the pretreatment required by the aluminium scrap

Report with the results of the heat treatment optimization test
Report on the standardization landscape and applicable standards
Report on specifications required by the low CRM aluminium alloys

Report on specifications required by the low CRM aluminium alloys considering peculiarities of foundry extrusion and stamping processes

Product Category Rule for aluminium components of passenger cars in Europe
Report describing design procedure and identification of new alloys with reduced CRM content

Report describing design procedure and identification of new alloys with reduced CRM content to be produced and analysed in the subsequent stages of the project

Communication and Dissemination Master Plan
Report with the results of the laboratory trials with partially recycled alloys
First Plan of Use and Dissemination of Results

SALEMA introductory video
SALEMA brochure
Project website and social media channels

Production of large Al scraps classes batches for WP 4-5-6
New alloys produced for HPDC process

New alloys produced for HPDC process (4 alloys x 3 variations x 2 t each),

Data Management Plan

Publications

Hot Stamped Aluminium: Process Viability and Implications on Crashworthiness

Auteurs: Jaume Pujante, David Frómeta, Eduard Garcia-Llamas, Maria Giménez
Publié dans: Proceedings of the 8th CHS2 Conference: Hot Sheet Metal Forming of High-Performance Steel, 2022, ISBN 978-3-95735-150-0
Éditeur: https://www.verlag-wiss-scripten.de/

Preparation of High-Quality 6xxx Aluminium Eco Alloys Cast in Billets

Auteurs: Sonia Boczkal, Bogusław Augustyn , Joanna Hrabia-Wisnios , Dawid Kapinos , Gregory Lewis ,Pierre-François Bareel , Stéphane Savelli , Manel da Silva and Tutku Özen
Publié dans: Engineering Proceedings, Numéro 2023, 43, 23, 2023, Page(s) 10
Éditeur: MDPI
DOI: 10.3390/engproc2023043023

Il Progetto SALEMA e lo sviluppo di leghe “sostenibili” per la fonderia

Auteurs: Franco Bonollo
Publié dans: METEF, 2022
Éditeur: METEF

SALEMA Project: leghe di alluminio sostenibili a supporto della mobilità elettrica

Auteurs: Ruggero Zambelli, Zanei Gianluca, Franco Bonollo, Ivo De Lutiis
Publié dans: 39th Conf. Italian Association of Metallurgy, 2022
Éditeur: Italian Association of Metallurgy

SALEMA Project: leghe di alluminio sostenibili a supporto della mobilità elettrica

Auteurs: Franco Bonollo, Ivo De Lutiis, Ruggero Zambelli, G. Zanei
Publié dans: 39a edizione del Convegno Nazionale AIM, 2022
Éditeur: Associazione Italiana di Metallurgia

Alüminyum Endüstrisinde Kullanılan Tekno-Ekonomik ve Sürdürülebilir Yöntemlerin İncelenmesi (Investigation of Techno-Economic and Sustainable Methods Used in Aluminum Industry)

Auteurs: Tutku Ozen
Publié dans: 2022
Éditeur: ALUS

Substitution of Critical Raw Materials in Aluminum Alloys for HPDC

Auteurs: Claudio Mus
Publié dans: EUROGUSS, 2022
Éditeur: EUROGUSS

Le auto del fututo ? Leggere e green grazie all'alluminio

Auteurs: Giulia Armeni (Journalist), Franco Bonollo (UNIPD
Publié dans: Il Giornale di Vicenza, 2022, Page(s) 50-51
Éditeur: Il Giornale di Vicenza

Sostenibilità e innovazione nell’industria automotive: studio e analisi delle composizioni chimiche di leghe di alluminio

Auteurs: Ivo de Lutis
Publié dans: 2022
Éditeur: UNIPD

Modelli matematici da previsione delle caratteristiche tecnologiche di leghe di alluminio

Auteurs: Massimo Spoladore
Publié dans: 2021
Éditeur: UNIPD

Recherche de données OpenAIRE...

Livrables

Publications

Partager cette page

Télécharger