Skip to main content
European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

Substitution of Critical Raw Materials on Aluminium Alloys for electrical vehicles

Rezultaty

Project Handbook

Project Handbook EUT M3 Manual with detailed instructions and templates for the edition of the different deliverables and compliance with the reporting obligations

Report on the scientific and technological dissemination

Report on the scientific and technological dissemination, including feedback from the 2 stakeholders WS

Report on the contribution to standardization
Report with the properties characterized for the different alloys used at the Trials
Report on the interaction with other EU projects and EC events

Report on the interaction with other EU projects and EC events, including report from the 2 stakeholders WS

Definition of the pre-treatment required by the aluminium scrap

Definition of the pretreatment required by the aluminium scrap

LCA result's report of the different alloys and production technologies studied

LCA result’s report of the different alloys and production technologies studied

Report with the results of the heat treatment optimization test
Report with the analysis of the different scrap groups

Report with the analysis of the different scrap groups provided by COMET

Policy-brief

Policy-brief, derived from Policy recommendations and including feedback from the 2nd stakeholder WS

Report on the standardization landscape and applicable standards
Report on specifications required by the low CRM aluminium alloys

Report on specifications required by the low CRM aluminium alloys considering peculiarities of foundry extrusion and stamping processes

Product Category Rule for aluminium components of passenger cars in Europe
Alloy specifications for partially recycled alloys
Report containing description of criteria and tools used for exploring alternative alloying systems

Report containing description of criteria and tools used for exploring alternative alloying systems, and for performing process vs microstructure optimisation

Report describing design procedure and identification of new alloys with reduced CRM content

Report describing design procedure and identification of new alloys with reduced CRM content to be produced and analysed in the subsequent stages of the project

Communication and Dissemination Master Plan
Best Practices for Communication & Dissemination Activities
Handbook to apply Agile methodology in non-IT research projects

Handbook to apply Agile methodology in non-IT research projects: how-to and benefits

Report with the results obtained in the industrial laboratory trials with the different alloys
LCC result's report of the LCC of the different alloys and production technologies studied

LCC result’s report of the LCC of the different alloys and production technologies studied

Report with the results of the laboratory trials with partially recycled alloys
Responsible Research Management Report
First Plan of Use and Dissemination of Results

Publikacje

Hot Stamped Aluminium: Process Viability and Implications on Crashworthiness

Autorzy: Jaume Pujante, David Frómeta, Eduard Garcia-Llamas, Maria Giménez
Opublikowane w: Proceedings of the 8th CHS2 Conference: Hot Sheet Metal Forming of High-Performance Steel, 2022, ISBN 978-3-95735-150-0
Wydawca: https://www.verlag-wiss-scripten.de/

Preparation of High-Quality 6xxx Aluminium Eco Alloys Cast in Billets

Autorzy: Sonia Boczkal, Bogusław Augustyn , Joanna Hrabia-Wisnios , Dawid Kapinos , Gregory Lewis ,Pierre-François Bareel , Stéphane Savelli , Manel da Silva and Tutku Özen
Opublikowane w: Engineering Proceedings, Numer 2023, 43, 23, 2023, Strona(/y) 10
Wydawca: MDPI
DOI: 10.3390/engproc2023043023

Il Progetto SALEMA e lo sviluppo di leghe “sostenibili” per la fonderia

Autorzy: Franco Bonollo
Opublikowane w: METEF, 2022
Wydawca: METEF

SALEMA Project: leghe di alluminio sostenibili a supporto della mobilità elettrica

Autorzy: Ruggero Zambelli, Zanei Gianluca, Franco Bonollo, Ivo De Lutiis
Opublikowane w: 39th Conf. Italian Association of Metallurgy, 2022
Wydawca: Italian Association of Metallurgy

SALEMA Project: leghe di alluminio sostenibili a supporto della mobilità elettrica

Autorzy: Franco Bonollo, Ivo De Lutiis, Ruggero Zambelli, G. Zanei
Opublikowane w: 39a edizione del Convegno Nazionale AIM, 2022
Wydawca: Associazione Italiana di Metallurgia

Alüminyum Endüstrisinde Kullanılan Tekno-Ekonomik ve Sürdürülebilir Yöntemlerin İncelenmesi (Investigation of Techno-Economic and Sustainable Methods Used in Aluminum Industry)

Autorzy: Tutku Ozen
Opublikowane w: 2022
Wydawca: ALUS

Substitution of Critical Raw Materials in Aluminum Alloys for HPDC

Autorzy: Claudio Mus
Opublikowane w: EUROGUSS, 2022
Wydawca: EUROGUSS

Le auto del fututo ? Leggere e green grazie all'alluminio

Autorzy: Giulia Armeni (Journalist), Franco Bonollo (UNIPD
Opublikowane w: Il Giornale di Vicenza, 2022, Strona(/y) 50-51
Wydawca: Il Giornale di Vicenza

Sostenibilità e innovazione nell’industria automotive: studio e analisi delle composizioni chimiche di leghe di alluminio

Autorzy: Ivo de Lutis
Opublikowane w: 2022
Wydawca: UNIPD

Modelli matematici da previsione delle caratteristiche tecnologiche di leghe di alluminio

Autorzy: Massimo Spoladore
Opublikowane w: 2021
Wydawca: UNIPD

Comparison of As Cast and T6 heat treatment on high end-of-life-scrap secondary aluminium alloy for High-Pressure Die Casting automotive structural components

Autorzy: Andrea Bongiovanni, Manel Da Silva, Alberto Castellero
Opublikowane w: La Metallurgia Italiana, Numer 2024, 115, 5, 2024, Strona(/y) 50-56, ISSN 0026-0843
Wydawca: Edimet SpA

Wyszukiwanie danych OpenAIRE...

Podczas wyszukiwania danych OpenAIRE wystąpił błąd

Brak wyników