Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Aerodynamic and aeroacoustic modeling of closely operating propellers for DIStributed PROPulsion

Description du projet

Multiplier les petites hélices et optimiser leur disposition pour améliorer la propulsion

Depuis près de 80 ans, soit depuis que le premier avion à réaction a pris son envol, les moteurs à réaction qui le propulsent sont situés soit sous les ailes fixes soit sur le fuselage. La conception de nouveaux avions de plus en plus électrifiés a suscité des innovations dans les systèmes de propulsion. Parmi les concepts les plus prometteurs figure la propulsion distribuée: de nombreuses petites hélices électriques (réseaux d’hélices) sont réparties le long de l’avion avec une certaine flexibilité pour améliorer le couplage aérodynamique entre les hélices et les ailes et optimiser les performances par rapport aux conceptions conventionnelles. Le projet DISPROP, financé par l’UE, perfectionnera les outils de conception et d’analyse afin de soutenir l’optimisation des nouveaux systèmes de propulsion distribuée avec des hélices plus rapprochées pour améliorer l’efficacité et permettre des vols plus écologiques.

Objectif

DISPROP aims at improving the current aerodynamic and aeroacoustic analysis and design capabilities for large aircraft operating with distributed propulsion (DP) and propeller arrays. This will be done by generating a high-quality, industry-relevant experimental database using 2D and 2.5D wing sections equipped with propeller arrays. Using this database, the capability of existing CFD and CAA codes will be updated in order to better predict the relevant aerodynamic and aeroacoustic interaction phenomena occurring between the wing and the propellers slipstream. Parametric studies will be conducted to identify most promising configurations.
This 30-months 2,7M valued project will consist of four phases. After a preparatory phase, where relevant geometries will be selected based on their high potential for DP, two to three wing geometries will be highly parametrized in Phase 1 and investigated by both CFD and medium-scale wind tunnel tests (WTT). Then, in Phase 2, the most promising configuration will be wind-tunnel tested in large scale at DNW NWB to generate aerodynamic and aeroacoustic experimental database that will be used to validate CFD and CAA simulations. In a subsequent exploitation phase, the combined numerical and experimental database will be extrapolated to full-scale 3D geometries based on the advanced Power Balance Method.
The analysis and design tools matured and validated within DISPROP will enable the development of new aircraft configurations with DP and closely integrated propellers. Operating with a drastic increase in overall efficiency compared to conventional aircraft, such configurations contribute to the CS2 objective of reduced CO2 emissions.
The DISPROP consortium is composed of internationally recognized experts in CFD and CAA modeling, academic and industrial-scale WTT (the best facility in Europe for aerodynamic and aeroacoustic aircraft validation), as well as aircraft designers experienced in DP.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

RIA - Research and Innovation action

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) H2020-CS2-CFP11-2020-01

Voir tous les projets financés au titre de cet appel

Coordinateur

TECHNISCHE UNIVERSITAT BERLIN
Contribution nette de l'UE
€ 510 125,00
Coût total
€ 510 125,00

Participants (4)