CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
obligatory periodic project status reporting to EUfollowing the end of each reporting period the functionality of periodic reporting will be activated While the periodic reporting session is open in the grant management system each participant will be able tocomplete online their own Financial Statement and the financial report of their Third Parties if any including the explanations on the use of resources upload the narrative free text part part B of the periodic technical report as a pdf document
Scaffold Material Model ABAQUS Validation Report (se abrirá en una nueva ventana)Validation report describing the conducted validation tests for the developed Abaqus UMAT/VUMAT code / material model
Scaffold Material Model ABAQUS Verification Report (se abrirá en una nueva ventana)Verification report describing the conducted code verification tests for the developed Abaqus UMATVUMAT code
Patient-specific Xeltis-PV validation & UQ report (se abrirá en una nueva ventana)Model validation & UQ by comparing computed data with available clinical data sets.
Benchmark TAVI FSI-model - VVUQ report (se abrirá en una nueva ventana)Verification/Validation & UQ report for the Benchmark TAVI FSI-model. This report covers the FSI model.
EU Periodic Report 2 (se abrirá en una nueva ventana)obligatory periodic project status reporting to EUfollowing the end of each reporting period the functionality of periodic reporting will be activated. While the periodic reporting session is open in the grant management system, each participant will be able to:complete on-line their own Financial Statement (and the financial report of their Third Parties, if any) including the explanations on the use of resources; upload the narrative, free text part (part B) of the periodic technical report as a pdf document
Dissemination Plan Update (se abrirá en una nueva ventana)Patient-specific Xeltis-PV calibration & verification report (se abrirá en una nueva ventana)
Patient-specific calibration & verification simulations performed on 15 data sets. Comparison with available clinical data will be used to fine-tune the models.
Xeltis-PV FE-model - VVUQ report (se abrirá en una nueva ventana)Verification/Validation & UQ report for the Xeltis-PV FE-model. This report covers only the structural part of the model. FSI is not part of this report
Scaffold Material Test Data & Test Report Ia (se abrirá en una nueva ventana)Final test report about polymer scaffold material characterization program as conducted by Leartiker
Stent Material Evaluation and Calibration Report (se abrirá en una nueva ventana)Test report on the material evaluation and calibration of Nitinol as used for TVAI systems
Data Management Plan (se abrirá en una nueva ventana)Data Management Plans DMPs are a key element of good data management A DMP describes the data management life cycle for the data to be collected processed andor generated by a Horizon 2020 project As part of making research data findable accessible interoperable and reusable FAIR a DMP should include information on the handling of research data during after the end of the project what data will be collected processed andor generated which methodology standards will be applied whether data will be sharedmade open access and how data will be curated preserved including after the end of the projectA DMP is required for all projects participating in the extended ORD pilot unless they opt out of the ORD pilot However projects that opt out are still encouraged to submit a DMP on a voluntary basis
Scaffold Material Test Data & Test Report Id (se abrirá en una nueva ventana)Final test report about polymer scaffold material characterization program as conducted by TUGraz
Dissemination Plan (se abrirá en una nueva ventana)Patient specific Benchmark-TAVI validation & UQ report (se abrirá en una nueva ventana)
UQ & validation report based on 100 patient-specific simulations (previously prepared models). Comparison with clinical data sets.
Exploitation Plan (se abrirá en una nueva ventana)Scaffold Material Fatigue Test Report (se abrirá en una nueva ventana)
Final report on the fatigue behavior of the polymeric scaffold material considering the need to provide fatigue stability until it is fully remodeled.
Scaffold Material Test UQ Report (se abrirá en una nueva ventana)Test report on UQ of test results coming from Scaffold Material Test Data & Report 1a / 1b / 1c / 1d.
Scaffold Material Test Data & Test Report Ib (se abrirá en una nueva ventana)Final test report about polymer scaffold material characterization program as conducted by KULeuven Soft Tissue Biomechancs
Patient specific Benchmark-TAVI calibration & verification report (se abrirá en una nueva ventana)Patient-specific calibration & verification simulations performed on 20 patient data sets.Comparison of pre-TAVI & post-TAVI scenarios with available clinical data will be used to fine-tune the models.
Benchmark TAVI FE-model - VVUQ report (se abrirá en una nueva ventana)Verification/Validation & UQ report for the Benchmark TAVI FE-model. This report covers only the structural part of the model. FSI is not part of this report
Project Management Plan (se abrirá en una nueva ventana)Project Management Plan: classic project management document that covers all relevant items, such as in-scope / out-of-scope, time management, resource management, risk management, communication management etc. Items overlapping with Grant Agreement, Consortium Agreement, and Data Management will be referenced.
Scaffold Material Test Data & Test Report Ic (se abrirá en una nueva ventana)Final test report about polymer scaffold material characterization program as conducted by Armines MINES Sainttienne Soft Tissue Biomechanics
Webpage project brochure online presence flyer
Patient Data from Procurement, Digitisation, and Curation (ISMETT)Morphological and Physiological Data Collection and Classification
developed & validated patient specific Benchmark TAVI model will be provided to public
developed constitutive equations (material model) to describe the ETR process of the biodegradable polymeric scaffold material. Builds upon material model developed in WP1 & WP2
Publicaciones
Autores:
Hendrickx Amber
Publicado en:
2022
Editor:
European Society of biomechanics
Autores:
Hadi Shirazi et al.
Publicado en:
2023
Editor:
European Society of BIomechanics
Autores:
Hendrickx Amber
Publicado en:
2023
Editor:
European Society of Biomechanics
Autores:
H. Shirazi, L. Maes, T. Vervenne, N. Famaey
Publicado en:
2024
Editor:
ESB2024 congress
Autores:
van Tunen, Rick
Publicado en:
2023
Editor:
TU Delft
Autores:
Chiara Catalano, Tahir Turgut, Omar Zahalka, Nils Götzen, Stefano Cannata, Giovanni Gentile, Valentina Agnese, Caterina Gandolfo & Salvatore Pasta
Publicado en:
Cardiovasc Eng Tech, 2023, ISSN 1869-4098
Editor:
Cardiovasc Eng Tech
DOI:
10.1007/s13239-023-00699-7
Autores:
Roberta Scuoppo, Salvatore Castelbuono, Stefano Cannata, Giovanni Gentile, Valentina Agnese, Diego Bellavia, Caterina Gandolfo, Salvatore Pasta
Publicado en:
Medical & Biological Engineering & Computing, Edición 63, 2025, Página(s) 467-482, ISSN 0140-0118
Editor:
Institute of Electrical Engineers
DOI:
10.1007/s11517-024-03215-8
Autores:
Michele Terzano, Maximilian P. Wollner, Manuel P. Kainz, Malte Rolf-Pissarczyk, Nils Götzen and Gerhard A. Holzapfel
Publicado en:
Journal of the royal society interface, 2023, ISSN 1742-5662
Editor:
Royal Society
DOI:
10.1098/rsif.2023.0318
Autores:
Maximilian P. Wollner, Malte Rolf-Pissarczyk, Gerhard A. Holzapfel
Publicado en:
Computational Mechanics, 2025, ISSN 0178-7675
Editor:
Springer Verlag
DOI:
10.1007/s00466-024-02573-2
Autores:
Felipe Sempértegui, Stéphane Avril
Publicado en:
Computer Methods in Applied Mechanics and Engineering, Edición 412, 2023, Página(s) 116059, ISSN 0045-7825
Editor:
Elsevier BV
DOI:
10.1016/j.cma.2023.116059
Autores:
Roberta Scuoppo, Stefano Cannata, Caterina Gandolfo, Diego Bellavia, Salvatore Pasta
Publicado en:
Journal of Biomechanics, Edición 176, 2024, Página(s) 112357, ISSN 0021-9290
Editor:
Elsevier BV
DOI:
10.1016/j.jbiomech.2024.112357
Autores:
Maximilian P. Wollner a, Michele Terzano a, Malte Rolf-Pissarczyk a, Gerhard A. Holzapfel a b
Publicado en:
Journal of the Mechanics and Physics of Solids, 2023, ISSN 0022-5096
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.jmps.2023.105403
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles