Rezultaty
obligatory periodic project status reporting to EUfollowing the end of each reporting period the functionality of periodic reporting will be activated While the periodic reporting session is open in the grant management system each participant will be able tocomplete online their own Financial Statement and the financial report of their Third Parties if any including the explanations on the use of resources upload the narrative free text part part B of the periodic technical report as a pdf document
Scaffold Material Model ABAQUS Validation ReportValidation report describing the conducted validation tests for the developed Abaqus UMAT/VUMAT code / material model
Scaffold Material Model ABAQUS Verification ReportVerification report describing the conducted code verification tests for the developed Abaqus UMATVUMAT code
Dissemination Plan UpdateXeltis-PV FE-model - VVUQ report
Verification/Validation & UQ report for the Xeltis-PV FE-model. This report covers only the structural part of the model. FSI is not part of this report
Scaffold Material Test Data & Test Report IaFinal test report about polymer scaffold material characterization program as conducted by Leartiker
Stent Material Evaluation and Calibration ReportTest report on the material evaluation and calibration of Nitinol as used for TVAI systems
Data Management PlanData Management Plans DMPs are a key element of good data management A DMP describes the data management life cycle for the data to be collected processed andor generated by a Horizon 2020 project As part of making research data findable accessible interoperable and reusable FAIR a DMP should include information on the handling of research data during after the end of the project what data will be collected processed andor generated which methodology standards will be applied whether data will be sharedmade open access and how data will be curated preserved including after the end of the projectA DMP is required for all projects participating in the extended ORD pilot unless they opt out of the ORD pilot However projects that opt out are still encouraged to submit a DMP on a voluntary basis
Scaffold Material Test Data & Test Report IdFinal test report about polymer scaffold material characterization program as conducted by TUGraz
Dissemination PlanScaffold Material Test Data & Test Report Ib
Final test report about polymer scaffold material characterization program as conducted by KULeuven Soft Tissue Biomechancs
Patient specific Benchmark-TAVI calibration & verification reportPatient-specific calibration & verification simulations performed on 20 patient data sets.Comparison of pre-TAVI & post-TAVI scenarios with available clinical data will be used to fine-tune the models.
Scaffold Material Test Data & Test Report IcFinal test report about polymer scaffold material characterization program as conducted by Armines MINES Sainttienne Soft Tissue Biomechanics
Webpage project brochure online presence flyer
developed constitutive equations (material model) to describe the ETR process of the biodegradable polymeric scaffold material. Builds upon material model developed in WP1 & WP2
Publikacje
Autorzy:
Hendrickx Amber.
Opublikowane w:
2022
Wydawca:
European Society of biomechanics
Autorzy:
Hadi Shirazi et al.
Opublikowane w:
2023
Wydawca:
European Society of BIomechanics
Autorzy:
Hendrickx Amber
Opublikowane w:
2023
Wydawca:
European Society of Biomechanics
Autorzy:
van Tunen, Rick
Opublikowane w:
2023
Wydawca:
TU Delft
Autorzy:
Chiara Catalano, Tahir Turgut, Omar Zahalka, Nils Götzen, Stefano Cannata, Giovanni Gentile, Valentina Agnese, Caterina Gandolfo & Salvatore Pasta
Opublikowane w:
Cardiovasc Eng Tech, 2023, ISSN 1869-4098
Wydawca:
Cardiovasc Eng Tech
DOI:
10.1007/s13239-023-00699-7
Autorzy:
Michele Terzano, Maximilian P. Wollner, Manuel P. Kainz, Malte Rolf-Pissarczyk, Nils Götzen and Gerhard A. Holzapfel
Opublikowane w:
Journal of the royal society interface, 2023, ISSN 1742-5662
Wydawca:
Royal Society
DOI:
10.1098/rsif.2023.0318
Autorzy:
Maximilian P. Wollner a, Michele Terzano a, Malte Rolf-Pissarczyk a, Gerhard A. Holzapfel a b
Opublikowane w:
Journal of the Mechanics and Physics of Solids, 2023, ISSN 0022-5096
Wydawca:
Pergamon Press Ltd.
DOI:
10.1016/j.jmps.2023.105403
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników