Made-to-measure micromachining with laser beams tailored in amplitude and phase

Informazioni relative al progetto

METAMORPHA

ID dell’accordo di sovvenzione: 101057457

DOI

10.3030/101057457

Data della firma CE 24 Maggio 2022

Data di avvio 1 Settembre 2022

Data di completamento 28 Febbraio 2027

Finanziato da

• Digital, Industry and Space

Costo totale

€ 6 994 296,75

Contributo UE

€ 6 994 296,00

Coordinato da

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Germany

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (1)

Technoeconomic Assessment of laser & machining systems

Pubblicazioni

Peer reviewed articles (10)

Real-time analysis of inline sensor data during USP-laser machining

Autori: Milena Žurić, Goomaral Sukhbold
Pubblicato in: Journal of Laser Applications, Numero 36, 2025, ISSN 1042-346X
Editore: Laser Institute of America
DOI: 10.2351/7.0001544/20145314/042004_1_7.0001544.PDF

Toward Taper-Free Structures in Ultrashort Pulse Laser Ablation Using Liquid Crystal Spatial Light Modulators

Pubblicato in: Journal of Laser Micro/Nanoengineering, 2025, ISSN 1880-0688
Editore: Japan Laser Processing Society
DOI: 10.2961/JLMN.2025.01.2003

Double-Pulse Femtosecond Laser Fabrication of Highly Ordered Periodic Structures on Au Thin Films Enabling Low-Cost Plasmonic Applications

Autori: Fotis Fraggelakis, Panagiotis Lingos, George D. Tsibidis, Emma Cusworth, Nicholas Kay, Laura Fumagalli, Vasyl G. Kravets, Alexander N. Grigorenko, Andrei V. Kabashin, Emmanuel Stratakis
Pubblicato in: ACS Nano, Numero 19, 2025, ISSN 1936-0851
Editore: American Chemical Society (ACS)
DOI: 10.1021/ACSNANO.5C06177

Beyond the IFTA – Phase mask generation for 3D laser beam shaping, tailored temperature distributions and optical amplifiers

Autori: Oskar Hofmann, Paul Buske, Robin Kurth, Annika Bonhoff, Carlo Holly
Pubblicato in: Journal of the European Optical Society-Rapid Publications, Numero 21, 2025, ISSN 1990-2573
Editore: EDP Sciences
DOI: 10.1051/JEOS/2025013

Efficient Surface Roughness Prediction in Laser Micromachining via Explainability‐Driven Feature Reduction

Autori: Miguel Camacho‐Sánchez, Fran Pastor‐Naranjo, Luis Correas‐Naranjo, Nélida Mirabet‐Herranz, Laëtitia Launet, Milena Zuric, Valery Naranjo
Pubblicato in: Expert Systems, Numero 43, 2026, ISSN 0266-4720
Editore: Wiley
DOI: 10.1111/EXSY.70257

Fabrication of laser-induced periodic surface structures on bulk polycarbonate using ultrafast laser processing in the infrared regime

Autori: Matina Vlahou, George D. Tsibidis, Emmanuel Stratakis
Pubblicato in: Optics & Laser Technology, Numero 204, 2026, ISSN 0030-3992
Editore: Elsevier BV
DOI: 10.1016/J.OPTLASTEC.2026.116124

Deciphering carrier dynamics in polycarbonate following excitation with ultrashort laser pulses

Autori: George D. Tsibidis, Matina Vlahou, Stella Maragkaki, Ioannis Konidakis, Emmanuel Stratakis
Pubblicato in: Journal of Applied Physics, Numero 138, 2025, ISSN 0021-8979
Editore: AIP Publishing
DOI: 10.1063/5.0281094/20623789/053103_1_5.0281094.PDF

Influence of inter-pulse delay and geometric constraints on damage and optical characteristics in thin metal targets irradiated by double ultrashort laser pulses

Autori: George D. Tsibidis
Pubblicato in: Applied Surface Science, Numero 732, 2026, ISSN 0169-4332
Editore: Elsevier BV
DOI: 10.1016/J.APSUSC.2026.166516

A study of the formation mechanisms of periodic surface structures on rutile TiO₂ single crystal induced by delayed, cross-polarized femtosecond ultraviolet laser pulses

Autori: A. Kanaev, G.D. Tsibidis, E. Stratakis, L. Museur
Pubblicato in: Surfaces and Interfaces, Numero 95, 2026, ISSN 2468-0230
Editore: Elsevier BV
DOI: 10.1016/J.SURFIN.2026.109813

Real-time analysis of inline sensor data during USP-laser machining

Autori: Milena Žurić and Goomaral Sukhbold
Pubblicato in: Journal of Laser Applications, Numero Vol. 36, 2024, ISSN 1938-1387
Editore: LIA
DOI: 10.2351/7.0001544

Conference proceedings (11)

Training techniques for robust laser beam shaping with diffractive neural networks

Autori: Paul Buske, Louis Michels, Oskar Hofmann, Annika Bonhoff, Carlo Holly
Pubblicato in: Practical Holography XXXIX: Displays, Materials, and Applications, 2025, ISSN 0277-786X
Editore: SPIE
DOI: 10.1117/12.3041210

Tailoring the Properties of the Electromagnetic Modes Excited by Mid-IR fs Pulses at the Interface Between Si and SiO₂ Coatings by Adjusting the Thickness of the Dielectric Material

Autori: G. D. Tsibidis, E. Stratakis
Pubblicato in: 2025 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC), 2025, ISSN 2833-1052
Editore: IEEE
DOI: 10.1109/CLEO/EUROPE-EQEC65582.2025.11110282

Localization of a workpiece position and orientation by means of off axis photodiodes

Autori: Milena Zuric
Pubblicato in: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XIV, 2025, ISSN 0277-786X
Editore: SPIE
DOI: 10.1117/12.3038897

Enhancing three-dimensional beam shaping accuracy through cascaded spatial light modulators using diffractive neural networks

Autori: Paul Buske, Fynn Janssen, Oskar Hofmann, Jochen Stollenwerk, Carlo Holly
Pubblicato in: SPIE Optical Systems Design 2024, 2024, ISSN 0277-786X
Editore: SPIE
DOI: 10.1117/12.3023102

Micromachining upscaling from W to kW: the evolution of femtosecond laser applications

Autori: Anne Henrottin, Jérôme Patars, Antoine Defroidmont, Marc Décultot, Audrey Champion, Céline Petit, David Bruneel
Pubblicato in: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXXI, 2026, ISSN 0277-786X
Editore: SPIE
DOI: 10.1117/12.3077171

Impact of plasmonic modes and thermophysical properties on the double-pulse structuring of highly ordered LIPSS for biosensing applications

Autori: G. D. Tsibidis, F. Fraggelakis, P. Lingos, E. Cusworth, V. G. Kravets, A. N. Grigorenko, A. V. Kabashin, E. Stratakis
Pubblicato in: Nanoscale and Quantum Materials: From Synthesis and Laser Processing to Applications 2026, 2026, ISSN 0277-786X
Editore: SPIE
DOI: 10.1117/12.3091292

Diffractive neural networks for robust laser beam shaping with B-spline-parameterized phase masks

Autori: Dominik Onyszkiewicz, Kira Laumann, Paul Buske, Annika Bonhoff, Carlo Holly
Pubblicato in: Computational Optics 2026, 2026, ISSN 0277-786X
Editore: SPIE
DOI: 10.1117/12.3099112

Diffractive Neural Networks Built from Spatial Light Modulators for Laser Beam Shaping in the NIR and VIS

Autori: Paul Buske, Jochen Stollenwerk and Carlo Holly
Pubblicato in: IODC 2023, 2023, ISSN 0277-786X
Editore: SPIE
DOI: 10.1117/12.2692407

Towards Sustainable Precision: Machine Learning for Laser Micromachining Optimization

Autori: Luis Correas-Naranjo, Miguel Camacho-Sánchez, Laëtitia Launet, Milena Zuric, Valery Naranjo
Pubblicato in: Lecture Notes in Computer Science, Intelligent Data Engineering and Automated Learning – IDEAL 2024, 2024
Editore: Springer Nature Switzerland
DOI: 10.1007/978-3-031-77731-8_4

"""Auf zwei kaskadierten Phasenmodulatoren basierendes optisches Modul für die flexible Lasermaterialbearbeitung"""

Autori: Mario Hesker, Paul Buske, Annika Bonhoff, Carlo Holly
Pubblicato in: 2024
Editore: DGAO

Pushing scan speed limits in ultrashort pulse laser polishing of steel

Autori: Marcel Kniffler, Astrid Sassmannshausen
Pubblicato in: Laser-based Micro- and Nanoprocessing XX, 2026, ISSN 0277-786X
Editore: SPIE
DOI: 10.1117/12.3078567