Zero-defect manufacturing for green transition in Europe

Projektinformationen

ENGINE

ID Finanzhilfevereinbarung: 101058179

DOI

10.3030/101058179

Projekt abgeschlossen

EK-Unterschriftsdatum 24 Mai 2022

Startdatum 1 Juni 2022

Enddatum 31 Mai 2025

Finanziert unter

• Digital, Industry and Space

Gesamtkosten

€ 11 553 468,00

EU-Beitrag

€ 8 939 318,00

Koordiniert durch

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Finland

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (2)

Dissemination, communication and networking action plan

On-line: The project website will be launched by M4. Use of social media (LinkedIn, Twitter) will establish and maintain public engagement. A video about the project results will be available at M30 and widespread through the online channels. 6 newsletters will be produced. Off-line: local dissemination events to involve/engage local stakeholders, as well as workshops for more focused discussions. Dissemination activities: a) General Public: leaflets, brochures, posters, press releases (every 6 months). Partners will participate in high visibility events, such as the European Researchers’ Night, Science on Stage Festival, European Science Festival, etc. b) Scientific Community. The project will also be showcased at Conferences. c) Industrial Community: via industrial fairs and exhibitions, dissemination workshops will be organized to present the project and verify interest towards new products/technologies. Articles will be published in specialized newsletters and industry-focused magazines/trade journals targeting specific audiences.

Skills requirements and specifications

VALTEH will compile current training practices of WAR, WIT, SIFR, and ABS to understand how the manufacturing plant personnel is trained and upskilled currently. Current practices will be updated by VALTEH based on the expertise of their teachers, with new approaches in education literature and best practices used in manufacturing plants of their clients outside of the consortium. In addition, VALTEH will take the data, software, and hardware specifications (T2.1, T3.1, T4.1) into account. Lastly, they will define a set of requirements and specifications for the training and upskilling materials.

Other (2)

Ethics Plan

The project will follow the ethics appraisal procedure in Horizon Europe. The aim is to ensure that the provisions on ethics regulation and rules are respected. VTT as coordinator will propose an external and independent expert to act as Ethics Advisor (EAd). The EAd will monitor the ethics issues involved in the project and how they are handled. The EAd will attend project meetings when necessary and will be consulted on all ethical issues. An Ethics Board composed by 5 partners representatives will be appointed at kick-off meeting. The Ethics Board will convene during Consortium Meetings to discuss and monitor project’s ethical issues. Further meetings will be organised as appropriate. By the end of M3 the Ethics Board will deliver an Ethics Plan (D9.3) detailing the forthcoming actions and responsibilities to ensure that ethics requirements are satisfied. The Ethics Plan will include a schedule to obtain and deliver all documents related to Ethics requirements identified in Part A.

Data management plan

The consortium will prepare a Project Data Management Plan (PDMP; D9.2) including a description of methodology and standards to be followed, what data sets are exploitable or made accessible for verification and re-use. The PDMP will be a dynamic tool that is updated regularly throughout the project duration. The PDMP and data management will be the tasks of the Data Manager.  

Veröffentlichungen

Peer reviewed articles (12)

Influence of surface condition, cycling frequency and ferritic zones on the high and very high cycle fatigue properties of a pearlitic steel

Autoren: Mahjoubeh Sistaninia, Jürgen Maierhofer, Angelika Spalek, Hans-Peter Gänser, Christian Bucher, Reinhard Pippan, Herwig Mayer, Bernd M. Schönbauer
Veröffentlicht in: Materials Science and Engineering: A, Ausgabe 900, 2024, ISSN 0921-5093
Herausgeber: Elsevier BV
DOI: 10.1016/J.MSEA.2024.146483

Probabilistic description of the cyclic R-curve based on microstructural barriers

Autoren: Joona Vaara, Kimmo Kärkkäinen, Miikka Väntänen, Jukka Kemppainen, Bernd Schönbauer, Suraj More, Mari Å man, Tero Frondelius
Veröffentlicht in: International Journal of Fatigue, Ausgabe 198, 2025, ISSN 0142-1123
Herausgeber: Elsevier BV
DOI: 10.1016/J.IJFATIGUE.2025.108953

The role of plasticity-induced crack closure in the non-propagation prediction of surface defect-initiated cracks near fatigue limit

Autoren: Kimmo Kärkkäinen; Joona Vaara; Miikka Väntänen; Immo Niskanen; Tero Frondelius
Veröffentlicht in: International Journal of Fatigue, 2022, ISSN 1879-3452
Herausgeber: Elsevier Ltd.
DOI: 10.1016/j.ijfatigue.2022.107462

Very High Cycle Fatigue Data Acquisition Using High-Accuracy Ultrasonic Fatigue Testing Equipment

Autoren: Schönbauer, Bernd; M.Fitzka, Michael; Jaskari, Matias; Järvenpää, Antti; Mayer, Herwig
Veröffentlicht in: Materials Performance and Characterization, 2023, ISSN 2165-3992
Herausgeber: ASTM International
DOI: 10.1520/MPC20220113

Plasticity-induced crack closure in the presence of loading irregularities in short cracks initiated at interior defects

Autoren: Kimmo Kärkkäinen, Joona Vaara, Tero Frondelius
Veröffentlicht in: Procedia Structural Integrity, 2024, ISSN 2452-3216
Herausgeber: Elsevier
DOI: 10.1016/J.PROSTR.2024.03.029

Modelling of anisotropic high-cycle fatigue of metals

Autoren: Reijo Kouhiaa, Niels Saabye Ottosenb, Matti Ristinmaab, Arturo Rubio Ruizc, Sami Holopainena, Timo Saksala
Veröffentlicht in: European Journal of Mechanics - A/Solids, 2025, ISSN 1873-7285
Herausgeber: Elsevier Masson SAS
DOI: 10.1016/J.EUROMECHSOL.2025.105601

High-cycle fatigue model calibration with a deterministic optimization approach

Autoren: Arturo, Rubio Ruiz; Timo, Saksala; Djebar, Baroudi; Mikko, Hokka; Reijo Kouhia
Veröffentlicht in: International Journal of Fatigue, 2023, ISSN 1879-3452
Herausgeber: Elsevier Ltd.
DOI: 10.1016/j.ijfatigue.2023.107747

On fatigue behavior of short cracks subjected to compressive underloads

Autoren: Kimmo Kärkkäinen, Joona Vaara, Miikka Väntänen, Mari Åman, Tero Frondelius
Veröffentlicht in: International Journal of Fatigue, Ausgabe 186, 2024, ISSN 0142-1123
Herausgeber: Elsevier BV
DOI: 10.1016/J.IJFATIGUE.2024.108383

Defect sensitivity of high-strength steel 42CrMo4: The role of crack initiation and non-propagation defining the fatigue limit

Autoren: Suraj S. More, Joona Vaara, Kimmo Kärkkäinen, Miikka Väntänen, Tero Frondelius, Herwig Mayer, Bernd M. Schönbauer
Veröffentlicht in: International Journal of Fatigue, Ausgabe 201, 2025, ISSN 0142-1123
Herausgeber: Elsevier BV
DOI: 10.1016/J.IJFATIGUE.2025.109147

Influence of elevated temperature on the very high cycle fatigue properties of bearing steels

Autoren: Bernd M. Schönbauer; Suraj S. More; Guillermo E. Morales-Espejel; Herwig Mayer
Veröffentlicht in: International Journal of Fatigue, 2023, ISSN 1879-3452
Herausgeber: Elsevier Ltd.
DOI: 10.1016/j.ijfatigue.2023.107847

Estimating the intrinsic dissipation using the second-harmonic temperature signal in the tension–tension fatigue

Autoren: Mauro Ricotta, Giovanni Meneghetti
Veröffentlicht in: Fatigue and Fracture of Engineering Materials and Structures, 2023, ISSN 1460-2695
Herausgeber: Wiley-Blackwell Publishing Ltd.
DOI: 10.1111/ffe.14132

Prediction of the fatigue limit defining mechanism of nodular cast iron based on statistical microstructural features

Autoren: Joona Vaara; Miikka Väntänen; Jarkko Laine; Jukka Kemppainen; Tero Frondelius
Veröffentlicht in: Engineering Fracture Mechanics, 2022, ISSN 1873-7315
Herausgeber: Elsevier Ltd.
DOI: 10.1016/j.engfracmech.2022.109004

Thesis and dissertations (4)

Utilization of acoustic emission in fretting wear and fretting fatigue measurements

Autoren: Ola-Pekka Laiholahti
Veröffentlicht in: 2024
Herausgeber: Tampere University

Modeling ultrasonic pulse-echo signals from ellipsoid inclusions in immersion testing (master's thesis)

Autoren: Saana Bergman
Veröffentlicht in: 2024
Herausgeber: University of Oulu

Lyhyen särön pysähtymisen kvantitatiivinen ennustaminen (master's thesis)

Autoren: Kimmo Kärkkäinen
Veröffentlicht in: 2023
Herausgeber: University of Oulu

Integration of SysML V2, FMI, and PyFMI for enhanced system simulation

Autoren: Iiso Kramsu
Veröffentlicht in: University of Oulu repository, 2024
Herausgeber: University of Oulu

Conference proceedings (1)

Acoustic emissions caused by fretting induced adhesion, wear and cracking

Autoren: R. Kovanen, O.-P. Laiholahti, J. Juoksukangas, M. Vippola, J. Hintikka, A. Mäntylä, J. Vaara, T. Frondelius
Veröffentlicht in: Tribologia - Finnish Journal of Tribology, 2024
Herausgeber: Finnish Society for Tribology
DOI: 10.30678/FJT.154999