Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

All-in-one surface methodology for corrosion protection in Metal Additive Manufacturing

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Data Management Plan (se abrirá en una nueva ventana)

The Data Management Plan describes the data management life cycle for all data sets that will be collected, processed or generated by the action. It is a document describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved.

Communication, Dissemination & Exploitation Plan (se abrirá en una nueva ventana)

The plan describes the planned measures to maximize the impact of the project, including the dissemination and exploitation measures that are planned, and the target group(s) addressed. Regarding communication measures and public engagement strategy, the aim is to inform and reach out to society and show the activities performed, and the use and the benefits the project will have for citizens.

Publicaciones

Corrosion behavior of steel parts repaired using additive manufacturing: Overview and research perspective (se abrirá en una nueva ventana)

Autores: Marina Furbino, Rubén Del Olmo, Reynier I. Revilla, Iris De Graeve
Publicado en: Materials & Design, Edición 252, 2025, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/J.MATDES.2025.113769

Layered double hydroxides on additively manufactured Al–Si alloy: Growth mechanism, microstructure and corrosion performance (se abrirá en una nueva ventana)

Autores: Rubén del Olmo, Reynier I. Revilla, Francesco Andreatta, Iris De Graeve
Publicado en: Applied Surface Science, Edición 710, 2025, ISSN 0169-4332
Editor: Elsevier BV
DOI: 10.1016/J.APSUSC.2025.163891

Corrosion behaviour of novel Al-Fe-Zr alloy developed for additive manufacturing (se abrirá en una nueva ventana)

Autores: Reynier I. Revilla, Rubén del Olmo, Kitty Baert, Ilya Ostrovsky, Loïc Malet, Stéphane Godet, Iris De Graeve
Publicado en: Corrosion Science, Edición 257, 2026, ISSN 0010-938X
Editor: Elsevier BV
DOI: 10.1016/J.CORSCI.2025.113292

Role of non-metallic inclusions in the initiation and propagation of corrosion in wire arc additive manufactured low-alloy steel (se abrirá en una nueva ventana)

Autores: Marina Furbino, Rubén Del Olmo, Zhichao Che, Arshad Yazdanpanah, Loïc Malet, Stéphane Godet, Chao Liu, Reynier I. Revilla, Iris De Graeve
Publicado en: Corrosion Science, Edición 259, 2026, ISSN 0010-938X
Editor: Elsevier BV
DOI: 10.1016/J.CORSCI.2025.113509

Microstructure and corrosion behaviour of 316L stainless steel deposited by laser-based directed energy deposition on wrought material: A post-mortem analysis bringing insights for coating and repair applications (se abrirá en una nueva ventana)

Autores: Meron Desalegn Tuemay, Reynier I. Revilla, Rubén Del Olmo, Zoé Jardon, Michaël Hinderdael, Iris De Graeve
Publicado en: Engineering Failure Analysis, Edición 179, 2026, ISSN 1350-6307
Editor: Elsevier BV
DOI: 10.1016/J.ENGFAILANAL.2025.109815

Synergistic effects of etching and electropolishing on additively manufactured Ti-6Al-4V scaffolds for biomedical implants (se abrirá en una nueva ventana)

Autores: Ruben del Olmo, Reynier I. Revilla, Floriane Debuisson, Kitty Baert, Brecht Van Hooreweder, Anne des Rieux, Iris De Graeve, Ana Santos-Coquillat
Publicado en: Additive Manufacturing, Edición 116, 2026, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/J.ADDMA.2026.105083

Data Management Plan

New Trends in the Design of Biomaterials for 3D and 4D Printing (se abrirá en una nueva ventana)

Autores: Rubén del Olmo, Enrique Martínez-Campos, José Javier Relinque, Alberto Gallardo, Juan Rodríguez-Hernández, Endzhe Matykina, Ana Santos-Coquillat
Publicado en: Advances in Material Research and Technology, Advances in Biomaterials Research, 2025
Editor: Springer Nature Switzerland
DOI: 10.1007/978-3-031-97481-6_3

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles

Mi folleto 0 0